From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S936151AbXLQTyc (ORCPT ); Mon, 17 Dec 2007 14:54:32 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1757978AbXLQTkz (ORCPT ); Mon, 17 Dec 2007 14:40:55 -0500 Received: from DSL022.labridge.com ([206.117.136.22]:3178 "EHLO perches.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1763967AbXLQTkx (ORCPT ); Mon, 17 Dec 2007 14:40:53 -0500 From: Joe Perches To: linux-kernel@vger.kernel.org Cc: Andrew Morton , linux-pcmcia@lists.infradead.org Subject: [PATCH] drivers/pcmcia/: Spelling fixes Date: Mon, 17 Dec 2007 11:40:12 -0800 Message-Id: <1197920439-5455-6-git-send-email-joe@perches.com> X-Mailer: git-send-email 1.5.3.7.949.g2221a6 Message-Id: <5703e57f925f31fc0eb38873bd7f10fc44f99cb4.1197918892.git.joe@perches.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Signed-off-by: Joe Perches --- drivers/pcmcia/m32r_pcc.c | 2 +- drivers/pcmcia/m8xx_pcmcia.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c index c5e0d89..ec4c125 100644 --- a/drivers/pcmcia/m32r_pcc.c +++ b/drivers/pcmcia/m32r_pcc.c @@ -368,7 +368,7 @@ static irqreturn_t pcc_interrupt(int irq, void *dev) handled = 1; irc = pcc_get(i, PCIRC); irc >>=16; - debug(2, "m32r-pcc:interrput: socket %d pcirc 0x%02x ", i, irc); + debug(2, "m32r-pcc:interrupt: socket %d pcirc 0x%02x ", i, irc); if (!irc) continue; diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c index d182760..4ea426a 100644 --- a/drivers/pcmcia/m8xx_pcmcia.c +++ b/drivers/pcmcia/m8xx_pcmcia.c @@ -851,7 +851,7 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t * state) I tried to control the CxOE signal with SS_OUTPUT_ENA, but the reset signal seems connected via the 541. If the CxOE is left high are some signals tristated and - no pullups are present -> the cards act wierd. + no pullups are present -> the cards act weird. So right now the buffers are enabled if the power is on. */ if (state->Vcc || state->Vpp) -- 1.5.3.7.949.g2221a6