From: jacliburn@bellsouth.net
To: jeff@garzik.org
Cc: csnook@redhat.com, linux-kernel@vger.kernel.org,
atl1-devel@lists.sourceforge.net,
Jay Cliburn <jacliburn@bellsouth.net>
Subject: [PATCH 06/26] atl1: update initialization parameters
Date: Mon, 31 Dec 2007 19:59:44 -0600 [thread overview]
Message-ID: <1199152804-3889-7-git-send-email-jacliburn@bellsouth.net> (raw)
In-Reply-To: <1199152804-3889-1-git-send-email-jacliburn@bellsouth.net>
From: Jay Cliburn <jacliburn@bellsouth.net>
Update initialization parameters to match the current vendor driver
version 1.2.40.2.
Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
---
drivers/net/atlx/atl1.c | 14 +++++++-------
1 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 262d3ca..695dcbc 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -136,20 +136,20 @@ static int __devinit atl1_sw_init(struct atl1_adapter *adapter)
hw->rfd_fetch_gap = 1;
hw->rx_jumbo_th = adapter->rx_buffer_len / 8;
hw->rx_jumbo_lkah = 1;
- hw->rrd_ret_timer = 16;
- hw->tpd_burst = 4;
+ hw->rrd_ret_timer = 4; /* 8 us */
+ hw->tpd_burst = 8;
hw->tpd_fetch_th = 16;
- hw->txf_burst = 0x100;
+ hw->txf_burst = 0x200;
hw->tx_jumbo_task_th = (hw->max_frame_size + 7) >> 3;
hw->tpd_fetch_gap = 1;
hw->rcb_value = atl1_rcb_64;
hw->dma_ord = atl1_dma_ord_enh;
- hw->dmar_block = atl1_dma_req_256;
- hw->dmaw_block = atl1_dma_req_256;
+ hw->dmar_block = atl1_dma_req_1024;
+ hw->dmaw_block = atl1_dma_req_1024;
hw->cmb_rrd = 4;
hw->cmb_tpd = 4;
- hw->cmb_rx_timer = 1; /* about 2us */
- hw->cmb_tx_timer = 1; /* about 2us */
+ hw->cmb_rx_timer = 2; /* about 4us */
+ hw->cmb_tx_timer = 256; /* about 512us */
hw->smb_timer = 100000; /* about 200ms */
spin_lock_init(&adapter->lock);
--
1.5.3.3
next prev parent reply other threads:[~2008-01-01 2:05 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-01 1:59 [PATCH 00/26] atl1: divide and modernize jacliburn
2008-01-01 1:59 ` [PATCH 01/26] atl1: relocate atl1 driver to /drivers/net/atlx jacliburn
2008-01-01 1:59 ` [PATCH 02/26] atl1: move common functions to atlx files jacliburn
2008-01-01 1:59 ` [PATCH 03/26] atl1: fix broken TSO jacliburn
2008-01-01 1:59 ` [PATCH 04/26] atl1: add ethtool register dump jacliburn
2008-01-22 9:54 ` Jeff Garzik
2008-01-01 1:59 ` [PATCH 05/26] atl1: print debug info if rrd error jacliburn
2008-01-22 9:55 ` Jeff Garzik
2008-01-01 1:59 ` jacliburn [this message]
2008-01-22 9:56 ` [PATCH 06/26] atl1: update initialization parameters Jeff Garzik
2008-01-23 2:13 ` Jay Cliburn
2008-01-23 2:19 ` Jeff Garzik
2008-01-23 2:30 ` Chris Snook
2008-01-01 1:59 ` [PATCH 07/26] atl1: clarify max rx frame size jacliburn
2008-01-01 1:59 ` [PATCH 08/26] atl1: additional DMA engine configuration jacliburn
2008-01-01 1:59 ` [PATCH 09/26] atl1: refactor tx processing jacliburn
2008-01-22 9:58 ` Jeff Garzik
2008-01-23 0:31 ` Jay Cliburn
2008-01-25 1:00 ` Jay Cliburn
2008-01-25 1:08 ` Chris Snook
2008-01-25 3:01 ` Jeff Garzik
2008-01-01 1:59 ` [PATCH 10/26] atl1: use csum_start jacliburn
2008-01-01 1:59 ` [PATCH 11/26] atl1: refactor initialization and startup jacliburn
2008-01-01 1:59 ` [PATCH 12/26] atl1: refactor atl1_probe jacliburn
2008-01-01 1:59 ` [PATCH 13/26] atl1: refactor interrupt handling jacliburn
2008-01-22 9:59 ` Jeff Garzik
2008-01-01 1:59 ` [PATCH 14/26] atl1: move stray defines to header file jacliburn
2008-01-01 1:59 ` [PATCH 15/26] atl1: tidy up ring management jacliburn
2008-01-01 1:59 ` [PATCH 16/26] atl1: modernize check link function jacliburn
2008-01-01 1:59 ` [PATCH 17/26] atl1: update phy config function jacliburn
2008-01-01 1:59 ` [PATCH 18/26] atl1: make function static jacliburn
2008-01-01 1:59 ` [PATCH 19/26] atl1: modernize down/up functions jacliburn
2008-01-22 10:01 ` Jeff Garzik
2008-01-01 1:59 ` [PATCH 20/26] atl1: update change mtu jacliburn
2008-01-01 1:59 ` [PATCH 21/26] atl1: update atl1_close jacliburn
2008-01-01 2:00 ` [PATCH 22/26] atl1: update netpoll jacliburn
2008-01-01 2:00 ` [PATCH 23/26] atl1: update shutdown and remove functions jacliburn
2008-01-01 2:00 ` [PATCH 24/26] atl1: update wake-on-lan jacliburn
2008-01-01 2:00 ` [PATCH 25/26] atl1: add NAPI support jacliburn
2008-01-01 6:09 ` Joonwoo Park
2008-01-01 18:15 ` [PATCH 25/26] [REVISED] " Jay Cliburn
2008-01-02 2:56 ` Joonwoo Park
2008-01-02 3:07 ` David Miller
2008-01-01 2:00 ` [PATCH 26/26] atl1: remove experimental tag and clean up comments jacliburn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1199152804-3889-7-git-send-email-jacliburn@bellsouth.net \
--to=jacliburn@bellsouth.net \
--cc=atl1-devel@lists.sourceforge.net \
--cc=csnook@redhat.com \
--cc=jeff@garzik.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®