From: Avi Kivity <avi@qumranet.com>
To: linux-kernel@vger.kernel.org, kvm-devel@lists.sourceforge.net
Cc: Marcelo Tosatti <marcelo@kvack.org>
Subject: [PATCH 41/54] KVM: MMU: Use cmpxchg for pte updates on walk_addr()
Date: Tue, 1 Jan 2008 17:36:07 +0200 [thread overview]
Message-ID: <1199201780-14001-42-git-send-email-avi@qumranet.com> (raw)
In-Reply-To: <1199201780-14001-1-git-send-email-avi@qumranet.com>
From: Marcelo Tosatti <marcelo@kvack.org>
In preparation for multi-threaded guest pte walking, use cmpxchg()
when updating guest pte's. This guarantees that the assignment of the
dirty bit can't be lost if two CPU's are faulting the same address
simultaneously.
[avi: fix kunmap_atomic() parameters]
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
---
drivers/kvm/paging_tmpl.h | 36 ++++++++++++++++++++++++++++++++++--
1 files changed, 34 insertions(+), 2 deletions(-)
diff --git a/drivers/kvm/paging_tmpl.h b/drivers/kvm/paging_tmpl.h
index 3c40a59..8086f82 100644
--- a/drivers/kvm/paging_tmpl.h
+++ b/drivers/kvm/paging_tmpl.h
@@ -34,7 +34,9 @@
#define PT_LEVEL_BITS PT64_LEVEL_BITS
#ifdef CONFIG_X86_64
#define PT_MAX_FULL_LEVELS 4
+ #define CMPXCHG cmpxchg
#else
+ #define CMPXCHG cmpxchg64
#define PT_MAX_FULL_LEVELS 2
#endif
#elif PTTYPE == 32
@@ -48,6 +50,7 @@
#define PT_LEVEL_MASK(level) PT32_LEVEL_MASK(level)
#define PT_LEVEL_BITS PT32_LEVEL_BITS
#define PT_MAX_FULL_LEVELS 2
+ #define CMPXCHG cmpxchg
#else
#error Invalid PTTYPE value
#endif
@@ -78,6 +81,26 @@ static gfn_t gpte_to_gfn_pde(pt_element_t gpte)
return (gpte & PT_DIR_BASE_ADDR_MASK) >> PAGE_SHIFT;
}
+static bool FNAME(cmpxchg_gpte)(struct kvm *kvm,
+ gfn_t table_gfn, unsigned index,
+ pt_element_t orig_pte, pt_element_t new_pte)
+{
+ pt_element_t ret;
+ pt_element_t *table;
+ struct page *page;
+
+ page = gfn_to_page(kvm, table_gfn);
+ table = kmap_atomic(page, KM_USER0);
+
+ ret = CMPXCHG(&table[index], orig_pte, new_pte);
+
+ kunmap_atomic(table, KM_USER0);
+
+ kvm_release_page_dirty(page);
+
+ return (ret != orig_pte);
+}
+
/*
* Fetch a guest pte for a guest virtual address
*/
@@ -91,6 +114,7 @@ static int FNAME(walk_addr)(struct guest_walker *walker,
gpa_t pte_gpa;
pgprintk("%s: addr %lx\n", __FUNCTION__, addr);
+walk:
walker->level = vcpu->mmu.root_level;
pte = vcpu->cr3;
#if PTTYPE == 64
@@ -135,8 +159,10 @@ static int FNAME(walk_addr)(struct guest_walker *walker,
if (!(pte & PT_ACCESSED_MASK)) {
mark_page_dirty(vcpu->kvm, table_gfn);
+ if (FNAME(cmpxchg_gpte)(vcpu->kvm, table_gfn,
+ index, pte, pte|PT_ACCESSED_MASK))
+ goto walk;
pte |= PT_ACCESSED_MASK;
- kvm_write_guest(vcpu->kvm, pte_gpa, &pte, sizeof(pte));
}
if (walker->level == PT_PAGE_TABLE_LEVEL) {
@@ -159,9 +185,14 @@ static int FNAME(walk_addr)(struct guest_walker *walker,
}
if (write_fault && !is_dirty_pte(pte)) {
+ bool ret;
+
mark_page_dirty(vcpu->kvm, table_gfn);
+ ret = FNAME(cmpxchg_gpte)(vcpu->kvm, table_gfn, index, pte,
+ pte|PT_DIRTY_MASK);
+ if (ret)
+ goto walk;
pte |= PT_DIRTY_MASK;
- kvm_write_guest(vcpu->kvm, pte_gpa, &pte, sizeof(pte));
kvm_mmu_pte_write(vcpu, pte_gpa, (u8 *)&pte, sizeof(pte));
}
@@ -484,3 +515,4 @@ static void FNAME(prefetch_page)(struct kvm_vcpu *vcpu,
#undef PT_MAX_FULL_LEVELS
#undef gpte_to_gfn
#undef gpte_to_gfn_pde
+#undef CMPXCHG
--
1.5.3.7
next prev parent reply other threads:[~2008-01-01 15:54 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-01 15:35 [PATCH 00/54] KVM patch queue review for 2.6.25 merge window (part IV) Avi Kivity
2008-01-01 15:35 ` [PATCH 01/54] KVM: MMU: Remove gva_to_hpa() Avi Kivity
2008-01-01 15:35 ` [PATCH 02/54] KVM: Remove gpa_to_hpa() Avi Kivity
2008-01-01 15:35 ` [PATCH 03/54] KVM: MMU: Rename variables of type 'struct kvm_mmu_page *' Avi Kivity
2008-01-01 15:35 ` [PATCH 04/54] KVM: MMU: Rename 'release_page' Avi Kivity
2008-01-01 15:35 ` [PATCH 05/54] KVM: Disallow fork() and similar games when using a VM Avi Kivity
2008-01-01 15:35 ` [PATCH 06/54] KVM: Enhance guest cpuid management Avi Kivity
2008-01-01 15:35 ` [PATCH 07/54] KVM: VMX: Remove the secondary execute control dependency on irqchip Avi Kivity
2008-01-01 15:35 ` [PATCH 08/54] KVM: Portability: Move unalias_gfn to arch dependent file Avi Kivity
2008-01-01 15:35 ` [PATCH 09/54] KVM: x86 emulator: Make a distinction between repeat prefixes F3 and F2 Avi Kivity
2008-01-01 15:35 ` [PATCH 10/54] KVM: x86 emulator: address size and operand size overrides are sticky Avi Kivity
2008-01-01 15:35 ` [PATCH 11/54] KVM: Remove misleading check for mmio during event injection Avi Kivity
2008-01-01 15:35 ` [PATCH 12/54] KVM: MMU: mark pages that were inserted to the shadow pages table as accessed Avi Kivity
2008-01-01 15:35 ` [PATCH 13/54] KVM: x86 emulator: Rename 'cr2' to 'memop' Avi Kivity
2008-01-01 15:35 ` [PATCH 14/54] KVM: x86 emulator: cmps instruction Avi Kivity
2008-01-01 15:35 ` [PATCH 15/54] KVM: Add ifdef in irqchip struct for x86 only structures Avi Kivity
2008-01-01 15:35 ` [PATCH 16/54] KVM: x86 emulator: Move rep processing before instruction execution Avi Kivity
2008-01-01 15:35 ` [PATCH 17/54] KVM: x86 emulator: unify two switches Avi Kivity
2008-01-01 15:35 ` [PATCH 18/54] KVM: x86 emulator: unify four switch statements into two Avi Kivity
2008-01-01 15:35 ` [PATCH 19/54] KVM: Portability: Move KVM_INTERRUPT vcpu ioctl to x86.c Avi Kivity
2008-01-01 15:35 ` [PATCH 20/54] KVM: Correct kvm_init() error paths not freeing bad_pge Avi Kivity
2008-01-01 15:35 ` [PATCH 21/54] KVM: Export include/linux/kvm.h only if $ARCH actually supports KVM Avi Kivity
2008-01-01 16:22 ` Sam Ravnborg
2008-01-01 16:35 ` Avi Kivity
2008-01-01 15:35 ` [PATCH 22/54] KVM: SVM: Remove KVM specific defines for MSR_EFER Avi Kivity
2008-01-01 15:35 ` [PATCH 23/54] KVM: Replace kvm_lapic with kvm_vcpu in ioapic/lapic interface Avi Kivity
2008-01-01 15:35 ` [PATCH 24/54] KVM: Replace dest_Lowest_Prio and dest_Fixed with self-defined macros Avi Kivity
2008-01-01 15:35 ` [PATCH 25/54] KVM: Extend ioapic code to support iosapic Avi Kivity
2008-01-01 15:35 ` [PATCH 26/54] KVM: Portability: Move address types to their own header file Avi Kivity
2008-01-01 15:35 ` [PATCH 27/54] KVM: Portability: Move IO device definitions to its " Avi Kivity
2008-01-01 15:35 ` [PATCH 28/54] KVM: Portability: Stop including x86-specific headers in kvm_main.c Avi Kivity
2008-01-01 15:35 ` [PATCH 29/54] KVM: Portability: Create kvm_arch_vcpu_runnable() function Avi Kivity
2008-01-01 15:35 ` [PATCH 30/54] KVM: Convert KVM from ->nopage() to ->fault() Avi Kivity
2008-01-01 15:35 ` [PATCH 31/54] KVM: MMU: Remove unused prev_shadow_ent variable from fetch() Avi Kivity
2008-01-01 15:35 ` [PATCH 32/54] KVM: Generalize exception injection mechanism Avi Kivity
2008-01-01 15:35 ` [PATCH 33/54] KVM: Replace page fault injection by the generalized exception queue Avi Kivity
2008-01-01 15:36 ` [PATCH 34/54] KVM: Replace #GP " Avi Kivity
2008-01-01 15:36 ` [PATCH 35/54] KVM: Use generalized exception queue for injecting #UD Avi Kivity
2008-01-01 15:36 ` [PATCH 36/54] KVM: x86 emulator: fix eflags preparation for emulation Avi Kivity
2008-01-01 15:36 ` [PATCH 37/54] KVM: VMX: Avoid exit when setting cr8 if the local apic is in the kernel Avi Kivity
2008-01-01 15:36 ` [PATCH 38/54] KVM: SVM: Emulate read/write access to cr8 Avi Kivity
2008-01-01 15:36 ` [PATCH 39/54] KVM: x86 emulator: Fix stack instructions on 64-bit mode Avi Kivity
2008-01-01 15:36 ` [PATCH 40/54] KVM: SVM: Trap access to the cr8 register Avi Kivity
2008-01-01 15:36 ` Avi Kivity [this message]
2008-01-01 15:36 ` [PATCH 42/54] KVM: MMU: Simplify calculation of pte access Avi Kivity
2008-01-01 15:36 ` [PATCH 43/54] KVM: MMU: Set nx bit correctly on shadow ptes Avi Kivity
2008-01-01 15:36 ` [PATCH 44/54] KVM: MMU: Move pte access calculation into a helper function Avi Kivity
2008-01-01 15:36 ` [PATCH 45/54] KVM: MMU: Fix inherited permissions for emulated guest pte updates Avi Kivity
2008-01-01 15:36 ` [PATCH 46/54] KVM: MMU: No need to pick up nx bit from guest pte Avi Kivity
2008-01-01 15:36 ` [PATCH 47/54] KVM: MMU: Pass pte dirty flag to set_pte() instead of calculating it on-site Avi Kivity
2008-01-01 15:36 ` [PATCH 48/54] KVM: MMU: Remove walker argument to set_pte() Avi Kivity
2008-01-01 15:36 ` [PATCH 49/54] KVM: MMU: Move set_pte() into guest paging mode independent code Avi Kivity
2008-01-01 15:36 ` [PATCH 50/54] KVM: MMU: Adjust mmu_set_spte() debug code for gpte removal Avi Kivity
2008-01-01 15:36 ` [PATCH 51/54] KVM: MMU: Use mmu_set_spte() for real-mode shadows Avi Kivity
2008-01-01 15:36 ` [PATCH 52/54] KVM: SVM: Exit to userspace if write to cr8 and not using in-kernel apic Avi Kivity
2008-01-01 15:36 ` [PATCH 53/54] KVM: MMU: Fix SMP shadow instantiation race Avi Kivity
2008-01-01 15:36 ` [PATCH 54/54] KVM: LAPIC: minor debugging compile fix Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1199201780-14001-42-git-send-email-avi@qumranet.com \
--to=avi@qumranet.com \
--cc=kvm-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=marcelo@kvack.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®