mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Shaohua Li <shaohua.li@intel.com>
To: michael@ellerman.id.au
Cc: lkml <linux-kernel@vger.kernel.org>,
	linux-pci <linux-pci@atrey.karlin.mff.cuni.cz>,
	Greg KH <greg@kroah.com>,
	"Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com>
Subject: Re: [RFC] PCIE ASPM support
Date: Tue, 08 Jan 2008 09:35:42 +0800	[thread overview]
Message-ID: <1199756142.28410.2.camel@sli10-desk.sh.intel.com> (raw)
In-Reply-To: <1199743355.7518.2.camel@concordia>


On Tue, 2008-01-08 at 09:02 +1100, Michael Ellerman wrote:
> On Thu, 2008-01-03 at 14:15 +0800, Shaohua Li wrote:
> > PCI Express ASPM defines a protocol for PCI Express components in the D0
> > state to reduce Link power by placing their Links into a low power state
> > and instructing the other end of the Link to do likewise. This
> > capability allows hardware-autonomous, dynamic Link power reduction
> > beyond what is achievable by software-only controlled power management.
> > However, The device should be configured by software appropriately.
> > Enabling ASPM will save power, but will introduce device latency.
> > 
> > This patch adds ASPM support in Linux. It introduces a global policy for
> > ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
> > it. The interface can be used as a boot option too. Currently we have
> > below setting:
> > 	-default, BIOS default setting
> > 	-powersave, highest power saving mode, enable all available ASPM state
> > and clock power management
> > 	-performance, highest performance, disable ASPM and clock power
> > management
> > By default, the 'default' policy is used currently.
> > 
> > In my test, power difference between powersave mode and performance mode
> > is about 1.3w in a system with 3 PCIE links.
> > 
> > please review, any comments will be appreciated.
> > 
> > Signed-off-by: Shaohua Li <shaohua.li@intel.com>
> 
> Minor nit, but you do a lot of these:
> 
> +	return ((struct link_state *)pdev->link_state)->bios_aspm_state;
> +	return ((struct link_state *)pdev->link_state)->bios_clk_state;
> +	((struct link_state*)pdev->link_state)->clk_pm_enabled = !!enable;
> +	((struct link_state*)pdev->link_state)->clk_pm_capable = capable;
> +	((struct link_state*)pdev->link_state)->clk_pm_enabled = enabled;
> +	((struct link_state*)pdev->link_state)->bios_clk_state = enabled;
> +	((struct link_state *)pdev->link_state)->enabled_state = state;
> +	if (((struct link_state *)pdev->link_state)->support_state == 0)
> +	if (((struct link_state *)pdev->link_state)->enabled_state == state)
> +	((struct link_state *)pdev->link_state)->enabled_state);
Thanks for your time. I'll fix in next release.

Thanks,
Shaohua


      reply	other threads:[~2008-01-08  1:35 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-01-03  6:15 Shaohua Li
2008-01-03 19:33 ` Kok, Auke
2008-01-04  1:32   ` Shaohua Li
2008-01-07 18:19     ` Kok, Auke
2008-01-08  1:34       ` Shaohua Li
2008-01-07 22:02 ` Michael Ellerman
2008-01-08  1:35   ` Shaohua Li [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1199756142.28410.2.camel@sli10-desk.sh.intel.com \
    --to=shaohua.li@intel.com \
    --cc=greg@kroah.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@atrey.karlin.mff.cuni.cz \
    --cc=michael@ellerman.id.au \
    --cc=venkatesh.pallipadi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®