Re: [PATCH v2] dt-bindings: clock: convert rockchip,rk3128-cru.txt to YAML

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 17/09/2022 20:42, Johan Jonker wrote:
> Convert rockchip,rk3128-cru.txt to YAML.
> 
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
> ---
> 
> Changed V2:
>   Use SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>   Add more clocks
> 
> ---
> 
> Rockchip recently replied on other clock-patches to dual-license the
> binding.
> 
> https://lore.kernel.org/all/510d1180-bc8e-7820-c772-ed7f35447087@rock-chips.com/
> From Finley with an  @rock-chips.com address, so this should be ok.
> 
> Document history:
> 
> git log Documentation/devicetree/bindings/clock/*rk312*.txt
> 
> Author: Elaine Zhang <zhangqing@rock-chips.com>
>     dt-bindings: add documentation for rk3126 clock
> Author: Elaine Zhang <zhangqing@rock-chips.com>
>     dt-bindings: add bindings for rk3128 clock controller
> ---
>  .../bindings/clock/rockchip,rk3128-cru.txt    | 58 ---------------
>  .../bindings/clock/rockchip,rk3128-cru.yaml   | 74 +++++++++++++++++++
>  2 files changed, 74 insertions(+), 58 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt
>  create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml
> 
> diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt
> deleted file mode 100644
> index 6f8744fd301b..000000000000
> --- a/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt
> +++ /dev/null
> @@ -1,58 +0,0 @@
> -* Rockchip RK3126/RK3128 Clock and Reset Unit
> -
> -The RK3126/RK3128 clock controller generates and supplies clock to various
> -controllers within the SoC and also implements a reset controller for SoC
> -peripherals.
> -
> -Required Properties:
> -
> -- compatible: should be "rockchip,rk3126-cru" or "rockchip,rk3128-cru"
> -  "rockchip,rk3126-cru" - controller compatible with RK3126 SoC.
> -  "rockchip,rk3128-cru" - controller compatible with RK3128 SoC.
> -- reg: physical base address of the controller and length of memory mapped
> -  region.
> -- #clock-cells: should be 1.
> -- #reset-cells: should be 1.
> -
> -Optional Properties:
> -
> -- rockchip,grf: phandle to the syscon managing the "general register files"
> -  If missing pll rates are not changeable, due to the missing pll lock status.
> -
> -Each clock is assigned an identifier and client nodes can use this identifier
> -to specify the clock which they consume. All available clocks are defined as
> -preprocessor macros in the dt-bindings/clock/rk3128-cru.h headers and can be
> -used in device tree sources. Similar macros exist for the reset sources in
> -these files.
> -
> -External clocks:
> -
> -There are several clocks that are generated outside the SoC. It is expected
> -that they are defined using standard clock bindings with following
> -clock-output-names:
> - - "xin24m" - crystal input - required,
> - - "ext_i2s" - external I2S clock - optional,
> - - "gmac_clkin" - external GMAC clock - optional
> -
> -Example: Clock controller node:
> -
> -	cru: cru@20000000 {
> -		compatible = "rockchip,rk3128-cru";
> -		reg = <0x20000000 0x1000>;
> -		rockchip,grf = <&grf>;
> -
> -		#clock-cells = <1>;
> -		#reset-cells = <1>;
> -	};
> -
> -Example: UART controller node that consumes the clock generated by the clock
> -  controller:
> -
> -	uart2: serial@20068000 {
> -		compatible = "rockchip,serial";
> -		reg = <0x20068000 0x100>;
> -		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
> -		clock-frequency = <24000000>;
> -		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
> -		clock-names = "sclk_uart", "pclk_uart";
> -	};
> diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml
> new file mode 100644
> index 000000000000..b77aec3a6f8d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml
> @@ -0,0 +1,74 @@
> +# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/rockchip,rk3128-cru.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Rockchip RK3126/RK3128 Clock and Reset Unit (CRU)
> +
> +maintainers:
> +  - Elaine Zhang <zhangqing@rock-chips.com>
> +  - Heiko Stuebner <heiko@sntech.de>
> +
> +description: |
> +  The RK3126/RK3128 clock controller generates and supplies clock to various
> +  controllers within the SoC and also implements a reset controller for SoC
> +  peripherals.
> +  Each clock is assigned an identifier and client nodes can use this identifier
> +  to specify the clock which they consume. All available clocks are defined as
> +  preprocessor macros in the dt-bindings/clock/rk3128-cru.h headers and can be
> +  used in device tree sources. Similar macros exist for the reset sources in
> +  these files.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - rockchip,rk3126-cru
> +      - rockchip,rk3128-cru
> +
> +  reg:
> +    maxItems: 1
> +
> +  "#clock-cells":
> +    const: 1
> +
> +  "#reset-cells":
> +    const: 1
> +
> +  clocks:
> +    minItems: 1
> +    maxItems: 3
> +
> +  clock-names:
> +    minItems: 1
> +    maxItems: 3
> +    items:
> +      enum:
> +        - xin24m

xin24m is required thus it should be first and in fixed position. enum
is applicable only for next two items.



Best regards,
Krzysztof