Re: [PATCH v5 3/3] drm/bridge: sii902x: Add pixel clock check in atomic_check

[Aradhya Bhatia <a-bhatia1@ti.com>]

On 13-Jun-24 14:08, Jayesh Choudhary wrote:
> Check the pixel clock for the mode in atomic_check and ensure that
> it is within the range supported by the bridge.
> 
> Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
> ---
>  drivers/gpu/drm/bridge/sii902x.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c
> index 00a8c469f553..7f91b0db161e 100644
> --- a/drivers/gpu/drm/bridge/sii902x.c
> +++ b/drivers/gpu/drm/bridge/sii902x.c
> @@ -496,6 +496,10 @@ static int sii902x_bridge_atomic_check(struct drm_bridge *bridge,
>  				       struct drm_crtc_state *crtc_state,
>  				       struct drm_connector_state *conn_state)
>  {
> +	if (crtc_state->mode.clock < SII902X_MIN_PIXEL_CLOCK_KHZ ||
> +	    crtc_state->mode.clock > SII902X_MAX_PIXEL_CLOCK_KHZ)
> +		return -EINVAL;
> +
>  	/*
>  	 * There might be flags negotiation supported in future but
>  	 * set the bus flags in atomic_check statically for now.

Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>

-- 
Regards
Aradhya