Re: [PATCH net 1/4] net: ethernet: cortina: Fix MTU max setting

[Andrew Lunn <andrew@lunn.ch>]

> +	if (mtu > MTU_SIZE_BIT_MASK) {
> +		netdev_err(netdev, "%s: MTU too big, max size 2047 bytes, capped\n", __func__);
> +		mtu = MTU_SIZE_BIT_MASK;
> +	}

So this should not actually happen. If it does, some protocol above is
ignoring the MTU. And if that happens, you are going to spam the log
at line rate.

Packets which are truncated are also pretty useless. They are likely
to be dropped by the receiver when the CRC fails. So i would suggest
drop them here, and increment a counter.

>  #define SOF_EOF_BIT_MASK	0x3fffffff
> -#define SOF_BIT			0x80000000
> -#define EOF_BIT			0x40000000
> -#define EOFIE_BIT		BIT(29)
> -#define MTU_SIZE_BIT_MASK	0x1fff
> +#define SOF_BIT			BIT(31) /* Start of Frame */
> +#define EOF_BIT			BIT(30) /* End of Frame */
> +#define EOFIE_BIT		BIT(29) /* End of Frame Interrupt Enable */
> +#define MTU_SIZE_BIT_MASK	0x7ff /* Max MTU 2047 bytes */

Apart from the MTU_SIZE_BIT_MASK, this looks mostly unrelated.


    Andrew

---
pw-bot: cr