From: Michal Nazarewicz <m.nazarewicz@samsung.com>
To: linux-usb@vger.kernel.org
Cc: Michal Nazarewicz <m.nazarewicz@samsung.com>,
Greg KH <greg@kroah.com>,
Kyungmin Park <kyungmin.park@samsung.com>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Davide Libenzi <davidel@xmailserver.org>,
Thomas Gleixner <tglx@linutronix.de>,
linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCHv4 1/8] wait_event_interruptible_locked() interface
Date: Wed, 05 May 2010 12:53:11 +0200 [thread overview]
Message-ID: <11f2d7a2b97b514b33b0f92d9456d0c6e1d7501e.1273054945.git.mina86@mina86.com> (raw)
In-Reply-To: <cover.1273054944.git.mina86@mina86.com>
New wait_event_interruptible{,_exclusive}_locked{,_irq} macros added.
They work just like versions without _locked* suffix but require the
wait queue's lock to be held. Also __wake_up_locked() is now exported
as to pair it with the above macros.
The use case of this new facility is when one uses wait queue's lock
to protect a data structure. This may be advantageous if the
structure needs to be protected by a spinlock anyway. In particular,
with additional spinlock the following code has to be used to wait
for a condition:
spin_lock(&data.lock);
...
for (ret = 0; !ret && !(condition); ) {
spin_unlock(&data.lock);
ret = wait_event_interruptible(data.wqh, (condition));
spin_lock(&data.lock);
}
...
spin_unlock(&data.lock);
This looks bizarre plus wait_event_interruptible() locks the wait
queue's lock anyway so there is a unlock+lock sequence where it could
be avoided.
To avoid those problems and benefit from wait queue's lock, a code
similar to the following should be used:
/* Waiting */
spin_lock(&data.wqh.lock);
...
ret = wait_event_interruptible_locked(data.wqh, (condition));
...
spin_unlock(&data.wqh.lock);
/* Waiting exclusively */
spin_lock(&data.whq.lock);
...
ret = wait_event_interruptible_exclusive_locked(data.whq, (condition));
...
spin_unlock(&data.whq.lock);
/* Waking up */
spin_lock(&data.wqh.lock);
...
wake_up_locked(&data.wqh);
...
spin_unlock(&data.wqh.lock);
When spin_lock_irq() is used matching versions of macros need to be
used (*_locked_irq()).
Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
---
include/linux/wait.h | 149 ++++++++++++++++++++++++++++++++++++++++++++++++++
kernel/sched.c | 1 +
2 files changed, 150 insertions(+), 0 deletions(-)
diff --git a/include/linux/wait.h b/include/linux/wait.h
index a48e16b..fc3c040 100644
--- a/include/linux/wait.h
+++ b/include/linux/wait.h
@@ -362,6 +362,155 @@ do { \
__ret; \
})
+
+#define __wait_event_interruptible_locked(wq, condition, exclusive, irq) \
+({ \
+ int __ret = 0; \
+ DEFINE_WAIT(__wait); \
+ if (exclusive) \
+ __wait.flags |= WQ_FLAG_EXCLUSIVE; \
+ do { \
+ if (likely(list_empty(&__wait.task_list))) \
+ __add_wait_queue_tail(&(wq), &__wait); \
+ set_current_state(TASK_INTERRUPTIBLE); \
+ if (signal_pending(current)) { \
+ __ret = -ERESTARTSYS; \
+ break; \
+ } \
+ if (irq) \
+ spin_unlock_irq(&(wq).lock); \
+ else \
+ spin_unlock(&(wq).lock); \
+ schedule(); \
+ if (irq) \
+ spin_lock_irq(&(wq).lock); \
+ else \
+ spin_lock(&(wq).lock); \
+ } while (!(condition)); \
+ __remove_wait_queue(&(wq), &__wait); \
+ __set_current_state(TASK_RUNNING); \
+ __ret; \
+})
+
+
+/**
+ * wait_event_interruptible_locked - sleep until a condition gets true
+ * @wq: the waitqueue to wait on
+ * @condition: a C expression for the event to wait for
+ *
+ * The process is put to sleep (TASK_INTERRUPTIBLE) until the
+ * @condition evaluates to true or a signal is received.
+ * The @condition is checked each time the waitqueue @wq is woken up.
+ *
+ * It must be called with wq.lock being held. This spinlock is
+ * unlocked while sleeping but @condition testing is done while lock
+ * is held and when this macro exits the lock is held.
+ *
+ * The lock is locked/unlocked using spin_lock()/spin_unlock()
+ * functions which must match the way they are locked/unlocked outside
+ * of this macro.
+ *
+ * wake_up_locked() has to be called after changing any variable that could
+ * change the result of the wait condition.
+ *
+ * The function will return -ERESTARTSYS if it was interrupted by a
+ * signal and 0 if @condition evaluated to true.
+ */
+#define wait_event_interruptible_locked(wq, condition) \
+ ((condition) \
+ ? 0 : __wait_event_interruptible_locked(wq, condition, 0, 0))
+
+/**
+ * wait_event_interruptible_locked_irq - sleep until a condition gets true
+ * @wq: the waitqueue to wait on
+ * @condition: a C expression for the event to wait for
+ *
+ * The process is put to sleep (TASK_INTERRUPTIBLE) until the
+ * @condition evaluates to true or a signal is received.
+ * The @condition is checked each time the waitqueue @wq is woken up.
+ *
+ * It must be called with wq.lock being held. This spinlock is
+ * unlocked while sleeping but @condition testing is done while lock
+ * is held and when this macro exits the lock is held.
+ *
+ * The lock is locked/unlocked using spin_lock_irq()/spin_unlock_irq()
+ * functions which must match the way they are locked/unlocked outside
+ * of this macro.
+ *
+ * wake_up_locked() has to be called after changing any variable that could
+ * change the result of the wait condition.
+ *
+ * The function will return -ERESTARTSYS if it was interrupted by a
+ * signal and 0 if @condition evaluated to true.
+ */
+#define wait_event_interruptible_locked_irq(wq, condition) \
+ ((condition) \
+ ? 0 : __wait_event_interruptible_locked(wq, condition, 0, 1))
+
+/**
+ * wait_event_interruptible_exclusive_locked - sleep exclusively until a condition gets true
+ * @wq: the waitqueue to wait on
+ * @condition: a C expression for the event to wait for
+ *
+ * The process is put to sleep (TASK_INTERRUPTIBLE) until the
+ * @condition evaluates to true or a signal is received.
+ * The @condition is checked each time the waitqueue @wq is woken up.
+ *
+ * It must be called with wq.lock being held. This spinlock is
+ * unlocked while sleeping but @condition testing is done while lock
+ * is held and when this macro exits the lock is held.
+ *
+ * The lock is locked/unlocked using spin_lock()/spin_unlock()
+ * functions which must match the way they are locked/unlocked outside
+ * of this macro.
+ *
+ * The process is put on the wait queue with an WQ_FLAG_EXCLUSIVE flag
+ * set thus when other process waits process on the list if this
+ * process is awaken further processes are not considered.
+ *
+ * wake_up_locked() has to be called after changing any variable that could
+ * change the result of the wait condition.
+ *
+ * The function will return -ERESTARTSYS if it was interrupted by a
+ * signal and 0 if @condition evaluated to true.
+ */
+#define wait_event_interruptible_exclusive_locked(wq, condition) \
+ ((condition) \
+ ? 0 : __wait_event_interruptible_locked(wq, condition, 1, 0))
+
+/**
+ * wait_event_interruptible_exclusive_locked_irq - sleep until a condition gets true
+ * @wq: the waitqueue to wait on
+ * @condition: a C expression for the event to wait for
+ *
+ * The process is put to sleep (TASK_INTERRUPTIBLE) until the
+ * @condition evaluates to true or a signal is received.
+ * The @condition is checked each time the waitqueue @wq is woken up.
+ *
+ * It must be called with wq.lock being held. This spinlock is
+ * unlocked while sleeping but @condition testing is done while lock
+ * is held and when this macro exits the lock is held.
+ *
+ * The lock is locked/unlocked using spin_lock_irq()/spin_unlock_irq()
+ * functions which must match the way they are locked/unlocked outside
+ * of this macro.
+ *
+ * The process is put on the wait queue with an WQ_FLAG_EXCLUSIVE flag
+ * set thus when other process waits process on the list if this
+ * process is awaken further processes are not considered.
+ *
+ * wake_up_locked() has to be called after changing any variable that could
+ * change the result of the wait condition.
+ *
+ * The function will return -ERESTARTSYS if it was interrupted by a
+ * signal and 0 if @condition evaluated to true.
+ */
+#define wait_event_interruptible_exclusive_locked_irq(wq, condition) \
+ ((condition) \
+ ? 0 : __wait_event_interruptible_locked(wq, condition, 1, 1))
+
+
+
#define __wait_event_killable(wq, condition, ret) \
do { \
DEFINE_WAIT(__wait); \
diff --git a/kernel/sched.c b/kernel/sched.c
index c76ba43..20afbe6 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -3861,6 +3861,7 @@ void __wake_up_locked(wait_queue_head_t *q, unsigned int mode)
{
__wake_up_common(q, mode, 1, 0, NULL);
}
+EXPORT_SYMBOL_GPL(__wake_up_locked);
void __wake_up_locked_key(wait_queue_head_t *q, unsigned int mode, void *key)
{
--
1.7.1
next prev parent reply other threads:[~2010-05-05 10:53 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-05 10:53 [PATCHv4 0/8] The FunctionFS composite function Michal Nazarewicz
2010-05-05 10:53 ` Michal Nazarewicz [this message]
2010-05-05 10:53 ` [PATCHv4 2/8] fs/timerfd.c: make use of wait_event_interruptible_locked_irq() Michal Nazarewicz
2010-05-05 10:53 ` [PATCHv4 3/8] USB: gadget: __init and __exit tags removed Michal Nazarewicz
2010-05-05 10:53 ` [PATCHv4 4/8] USB: f_fs: the FunctionFS driver Michal Nazarewicz
2010-05-05 10:53 ` [PATCHv4 5/8] USB: g_ffs: the FunctionFS gadget driver Michal Nazarewicz
2010-05-05 10:53 ` [PATCHv4 6/8] USB: ffs-test: FunctionFS testing program Michal Nazarewicz
2010-05-05 10:53 ` [PATCHv4 7/8] USB: testusb: an USB testing application Michal Nazarewicz
2010-05-05 10:53 ` [PATCHv4 8/8] USB: testusb: testusb compatibility with FunctionFS gadget Michal Nazarewicz
2010-05-05 12:25 ` [PATCHv4.1 5/8] USB: g_ffs: the FunctionFS gadget driver Michal Nazarewicz
2010-05-05 23:42 ` Greg KH
2010-05-06 8:44 ` [PATCHv4 0/8] The FunctionFS composite function Michał Nazarewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11f2d7a2b97b514b33b0f92d9456d0c6e1d7501e.1273054945.git.mina86@mina86.com \
--to=m.nazarewicz@samsung.com \
--cc=davidel@xmailserver.org \
--cc=greg@kroah.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®