From: Liam Girdwood <lg@opensource.wolfsonmicro.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel <linux-kernel@vger.kernel.org>,
linux-arm-kernel <linux-arm-kernel@lists.arm.linux.org.uk>,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 2/6] regulator: regulator driver interface.
Date: Wed, 20 Feb 2008 17:09:00 +0000 [thread overview]
Message-ID: <1203527341.4071.90.camel@localhost.localdomain> (raw)
This interface allows regulator drivers to register their voltage and current
regulators with the core. It also has a notifier call chain for propagating
regulator events to clients.
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
---
include/linux/regulator/regulator-drv.h | 119 +++++++++++++++++++++++++++++++
1 files changed, 119 insertions(+), 0 deletions(-)
create mode 100644 include/linux/regulator/regulator-drv.h
diff --git a/include/linux/regulator/regulator-drv.h b/include/linux/regulator/regulator-drv.h
new file mode 100644
index 0000000..3c9b398
--- /dev/null
+++ b/include/linux/regulator/regulator-drv.h
@@ -0,0 +1,119 @@
+/*
+ * regulator-drv.h -- SoC Regulator support.
+ *
+ * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Regulator Driver Interface.
+ */
+
+
+#ifndef __LINUX_REGULATOR_DRV_H_
+#define __LINUX_REGULATOR_DRV_H_
+
+#include <linux/device.h>
+#include <linux/regulator/regulator.h>
+
+struct regulator_constraints;
+struct regulator_cdev;
+
+/**
+ * struct regulator_ops - regulator operations.
+ *
+ * This struct describes regulator operations.
+ */
+struct regulator_ops {
+
+ /* get/set regulator voltage */
+ int (*set_voltage)(struct regulator_cdev *, int uV);
+ int (*get_voltage)(struct regulator_cdev *);
+
+ /* get/set regulator current */
+ int (*set_current)(struct regulator_cdev *, int uA);
+ int (*get_current)(struct regulator_cdev *);
+
+ /* enable/disable regulator */
+ int (*enable)(struct regulator_cdev *);
+ int (*disable)(struct regulator_cdev *);
+ int (*is_enabled)(struct regulator_cdev *);
+
+ /* get/set regulator operating mode (defined in regulator.h) */
+ int (*set_mode)(struct regulator_cdev *, unsigned int mode);
+ unsigned int (*get_mode)(struct regulator_cdev *);
+
+ /* get most efficient regulator operating mode for load */
+ unsigned int (*get_optimum_mode)(struct regulator_cdev *, int input_uV,
+ int output_uV, int load_uA);
+};
+
+/*
+ * Regulators can either control voltage or current.
+ */
+enum regulator_type {
+ REGULATOR_VOLTAGE,
+ REGULATOR_CURRENT,
+};
+
+/**
+ * struct regulator_desc - Regulator descriptor
+ *
+ */
+struct regulator_desc {
+ const char *name;
+ int id;
+ struct regulator_ops *ops;
+ int irq;
+ enum regulator_type type;
+ struct module *owner;
+};
+
+/**
+ * regulator_register - register regulator
+ * @regulator: regulator source
+ * @reg_data: private regulator data
+ *
+ * Called by regulator drivers to register a regulator.
+ * Returns 0 on success.
+ */
+struct regulator_cdev *regulator_register(
+ struct regulator_desc *regulator_desc, void *reg_data);
+
+/**
+ * regulator_unregister - unregister regulator
+ * @regulator: regulator source
+ *
+ * Called by regulator drivers to unregister a regulator.
+ */
+void regulator_unregister(struct regulator_cdev *rcdev);
+
+/**
+ * regulator_notifier_call_chain - call regulator event notifier
+ * @regulator: regulator source
+ * @event: notifier block
+ * @data:
+ *
+ * Called by regulator drivers to notify clients a regulator event has
+ * occurred.
+ */
+int regulator_notifier_call_chain(struct regulator_cdev *rcdev,
+ unsigned long event, void *data);
+
+/**
+ * regulator_get_drvdata - get regulator driver data
+ * @regulator: regulator
+ */
+void *rcdev_get_drvdata (struct regulator_cdev *rcdev);
+
+/**
+ * regulator_get_id - get regulator ID
+ * @regulator: regulator
+ */
+int rcdev_get_id (struct regulator_cdev *rcdev);
+
+
+#endif
--
1.5.4.2
next reply other threads:[~2008-02-20 17:10 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-20 17:09 Liam Girdwood [this message]
2008-02-23 8:05 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1203527341.4071.90.camel@localhost.localdomain \
--to=lg@opensource.wolfsonmicro.com \
--cc=akpm@linux-foundation.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=linux-arm-kernel@lists.arm.linux.org.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome