mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Harvey Harrison <harvey.harrison@gmail.com>
To: David Brownell <david-b@pacbell.net>
Cc: Andrew Morton <akpm@linux-foundation.org>,
	LKML <linux-kernel@vger.kernel.org>
Subject: [PATCH 14/16] spi: replace remaining __FUNCTION__ occurrences
Date: Wed, 05 Mar 2008 18:24:58 -0800	[thread overview]
Message-ID: <1204770298.14154.50.camel@brick> (raw)

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
---
 drivers/spi/omap_uwire.c  |    4 ++--
 drivers/spi/spi_bitbang.c |    2 +-
 drivers/spi/spi_mpc83xx.c |    2 +-
 drivers/spi/spi_s3c24xx.c |    2 +-
 drivers/spi/xilinx_spi.c  |    8 ++++----
 5 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c
index 8245b51..ea18077 100644
--- a/drivers/spi/omap_uwire.c
+++ b/drivers/spi/omap_uwire.c
@@ -151,7 +151,7 @@ static int wait_uwire_csr_flag(u16 mask, u16 val, int might_not_catch)
 		if (time_after(jiffies, max_jiffies)) {
 			printk(KERN_ERR "%s: timeout. reg=%#06x "
 					"mask=%#06x val=%#06x\n",
-			       __FUNCTION__, w, mask, val);
+			       __func__, w, mask, val);
 			return -1;
 		}
 		c++;
@@ -437,7 +437,7 @@ static int uwire_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
 	}
 	omap_uwire_configure_mode(spi->chip_select, flags);
 	pr_debug("%s: uwire flags %02x, armxor %lu KHz, SCK %lu KHz\n",
-			__FUNCTION__, flags,
+			__func__, flags,
 			clk_get_rate(uwire->ck) / 1000,
 			rate / 1000);
 	status = 0;
diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi_bitbang.c
index f7f8580..061e344 100644
--- a/drivers/spi/spi_bitbang.c
+++ b/drivers/spi/spi_bitbang.c
@@ -214,7 +214,7 @@ int spi_bitbang_setup(struct spi_device *spi)
 		return retval;
 
 	dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n",
-			__FUNCTION__, spi->mode & (SPI_CPOL | SPI_CPHA),
+			__func__, spi->mode & (SPI_CPOL | SPI_CPHA),
 			spi->bits_per_word, 2 * cs->nsecs);
 
 	/* NOTE we _need_ to call chipselect() early, ideally with adapter
diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c
index 04f7cd9..df9f0d4 100644
--- a/drivers/spi/spi_mpc83xx.c
+++ b/drivers/spi/spi_mpc83xx.c
@@ -310,7 +310,7 @@ static int mpc83xx_spi_setup(struct spi_device *spi)
 		return retval;
 
 	dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec\n",
-		__FUNCTION__, spi->mode & (SPI_CPOL | SPI_CPHA),
+		__func__, spi->mode & (SPI_CPOL | SPI_CPHA),
 		spi->bits_per_word, 2 * mpc83xx_spi->nsecs);
 
 	/* NOTE we _need_ to call chipselect() early, ideally with adapter
diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
index 6e834b8..4ad5abb 100644
--- a/drivers/spi/spi_s3c24xx.c
+++ b/drivers/spi/spi_s3c24xx.c
@@ -169,7 +169,7 @@ static int s3c24xx_spi_setup(struct spi_device *spi)
 	}
 
 	dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n",
-		__FUNCTION__, spi->mode, spi->bits_per_word,
+		__func__, spi->mode, spi->bits_per_word,
 		spi->max_speed_hz);
 
 	return 0;
diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c
index 5d04f52..9ba5741 100644
--- a/drivers/spi/xilinx_spi.c
+++ b/drivers/spi/xilinx_spi.c
@@ -151,13 +151,13 @@ static int xilinx_spi_setup_transfer(struct spi_device *spi,
 	hz = (t) ? t->speed_hz : spi->max_speed_hz;
 	if (bits_per_word != 8) {
 		dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
-			__FUNCTION__, bits_per_word);
+			__func__, bits_per_word);
 		return -EINVAL;
 	}
 
 	if (hz && xspi->speed_hz > hz) {
 		dev_err(&spi->dev, "%s, unsupported clock rate %uHz\n",
-			__FUNCTION__, hz);
+			__func__, hz);
 		return -EINVAL;
 	}
 
@@ -181,7 +181,7 @@ static int xilinx_spi_setup(struct spi_device *spi)
 
 	if (spi->mode & ~MODEBITS) {
 		dev_err(&spi->dev, "%s, unsupported mode bits %x\n",
-			__FUNCTION__, spi->mode & ~MODEBITS);
+			__func__, spi->mode & ~MODEBITS);
 		return -EINVAL;
 	}
 
@@ -190,7 +190,7 @@ static int xilinx_spi_setup(struct spi_device *spi)
 		return retval;
 
 	dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n",
-		__FUNCTION__, spi->mode & MODEBITS, spi->bits_per_word, 0);
+		__func__, spi->mode & MODEBITS, spi->bits_per_word, 0);
 
 	return 0;
 }
-- 
1.5.4.GIT



             reply	other threads:[~2008-03-06  2:32 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-03-06  2:24 Harvey Harrison [this message]
2008-03-06  3:04 ` David Brownell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1204770298.14154.50.camel@brick \
    --to=harvey.harrison@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=david-b@pacbell.net \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®