On Mon, 2008-04-07 at 02:24 +0200, Szilveszter Ordog wrote: > However, if you add the following line > > #define DEBUG > > to the top of drivers/spi/atmel_spi.c (before the #include directives) > and recompile the kernel, then you would get lots of debug output > which could help us pinpoint the problem. > Right, I've attached the output from dmesg from the tester after he added #define DEBUG to the top of atmel_spi.c. I don't know how helpful it's going to be though, to my (untrained) eye everything looks in order. I've also attached the config. We have seen the problem reported across many SPI usages though in this case the tester has serial flash connected over SPI as an MTD. Without the #define DEBUG in there the board would hang while trying to mount that device. With the #define in place the mount succeeds but a hang is observed when trying to do anything with the device, eg ls. And to clarify, I don't have the issue myself, I've just been helping the tester debug the problem. He's now be added to the CC so we can get some more direct communications :-) Thanks, --Ben.