From: Robert Richter <robert.richter@amd.com>
To: Arjan van de Ven <arjan@infradead.org>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>,
Thomas Gleixner <tglx@linutronix.de>, Ingo Molnar <mingo@elte.hu>,
LKML <linux-kernel@vger.kernel.org>,
Andi Kleen <andi@firstfloor.org>,
Robert Richter <robert.richter@amd.com>
Subject: [PATCH 2/2] x86: Move PCI IO ECS code to x86/pci
Date: Thu, 12 Jun 2008 20:19:23 +0200 [thread overview]
Message-ID: <1213294763-19566-2-git-send-email-robert.richter@amd.com> (raw)
In-Reply-To: <20080603072550.GR23679@erda.amd.com>
"Form follows function". Code is now where it belongs to.
Signed-off-by: Robert Richter <robert.richter@amd.com>
---
arch/x86/kernel/cpu/amd.c | 3 ---
arch/x86/kernel/cpu/amd_64.c | 4 ----
arch/x86/kernel/cpu/cpu.h | 2 --
arch/x86/kernel/setup.c | 13 -------------
arch/x86/pci/Makefile_32 | 1 +
arch/x86/pci/amd_bus.c | 32 ++++++++++++++++++++++++++++++++
arch/x86/pci/direct.c | 16 +++++++++-------
arch/x86/pci/pci.h | 1 +
include/asm-x86/cpufeature.h | 2 --
9 files changed, 43 insertions(+), 31 deletions(-)
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index acc891a..81a07ca 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -266,9 +266,6 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
if (cpu_has_xmm2)
set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC);
-
- if (c->x86 == 0x10)
- amd_enable_pci_ext_cfg(c);
}
static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int size)
diff --git a/arch/x86/kernel/cpu/amd_64.c b/arch/x86/kernel/cpu/amd_64.c
index f8d2058..250bfe6 100644
--- a/arch/x86/kernel/cpu/amd_64.c
+++ b/arch/x86/kernel/cpu/amd_64.c
@@ -6,7 +6,6 @@
#include <asm/cacheflush.h>
#include <mach_apic.h>
-#include "cpu.h"
extern int __cpuinit get_model_name(struct cpuinfo_x86 *c);
extern void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c);
@@ -187,9 +186,6 @@ void __cpuinit init_amd(struct cpuinfo_x86 *c)
if (c->x86 == 0x10)
fam10h_check_enable_mmcfg();
- if (c->x86 == 0x10)
- amd_enable_pci_ext_cfg(c);
-
if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) {
unsigned long long tseg;
diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h
index f5d5bb1..40ad189 100644
--- a/arch/x86/kernel/cpu/cpu.h
+++ b/arch/x86/kernel/cpu/cpu.h
@@ -39,5 +39,3 @@ extern int get_model_name(struct cpuinfo_x86 *c);
extern void display_cacheinfo(struct cpuinfo_x86 *c);
#endif /* CONFIG_X86_32 */
-
-extern void __cpuinit amd_enable_pci_ext_cfg(struct cpuinfo_x86 *c);
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 20e14db..6f80b85 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -137,16 +137,3 @@ void __init setup_per_cpu_areas(void)
}
#endif
-#define ENABLE_CF8_EXT_CFG (1ULL << 46)
-
-void __cpuinit amd_enable_pci_ext_cfg(struct cpuinfo_x86 *c)
-{
- u64 reg;
- rdmsrl(MSR_AMD64_NB_CFG, reg);
- if (!(reg & ENABLE_CF8_EXT_CFG)) {
- reg |= ENABLE_CF8_EXT_CFG;
- wrmsrl(MSR_AMD64_NB_CFG, reg);
- }
- set_cpu_cap(c, X86_FEATURE_PCI_EXT_CFG);
-}
-
diff --git a/arch/x86/pci/Makefile_32 b/arch/x86/pci/Makefile_32
index 89ec35d..f647e7e 100644
--- a/arch/x86/pci/Makefile_32
+++ b/arch/x86/pci/Makefile_32
@@ -22,3 +22,4 @@ pci-$(CONFIG_X86_NUMAQ) := numa.o irq.o
pci-$(CONFIG_NUMA) += mp_bus_to_node.o
obj-y += $(pci-y) common.o early.o
+obj-y += amd_bus.o
diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index 5c2799c..15f505d 100644
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -1,5 +1,9 @@
#include <linux/init.h>
#include <linux/pci.h>
+#include "pci.h"
+
+#ifdef CONFIG_X86_64
+
#include <asm/pci-direct.h>
#include <asm/mpspec.h>
#include <linux/cpumask.h>
@@ -526,3 +530,31 @@ static int __init early_fill_mp_bus_info(void)
}
postcore_initcall(early_fill_mp_bus_info);
+
+#endif
+
+/* common 32/64 bit code */
+
+#define ENABLE_CF8_EXT_CFG (1ULL << 46)
+
+static void enable_pci_io_ecs_per_cpu(void *unused)
+{
+ u64 reg;
+ rdmsrl(MSR_AMD64_NB_CFG, reg);
+ if (!(reg & ENABLE_CF8_EXT_CFG)) {
+ reg |= ENABLE_CF8_EXT_CFG;
+ wrmsrl(MSR_AMD64_NB_CFG, reg);
+ }
+}
+
+static int __init enable_pci_io_ecs(void)
+{
+ /* assume all cpus from fam10h have IO ECS */
+ if (boot_cpu_data.x86 < 0x10)
+ return 0;
+ on_each_cpu(enable_pci_io_ecs_per_cpu, NULL, 1, 1);
+ pci_probe |= PCI_HAS_IO_ECS;
+ return 0;
+}
+
+postcore_initcall(enable_pci_io_ecs);
diff --git a/arch/x86/pci/direct.c b/arch/x86/pci/direct.c
index 27d61b6..9915293 100644
--- a/arch/x86/pci/direct.c
+++ b/arch/x86/pci/direct.c
@@ -265,14 +265,16 @@ void __init pci_direct_init(int type)
type);
if (type == 1) {
raw_pci_ops = &pci_direct_conf1;
- if (!raw_pci_ext_ops && cpu_has_pci_ext_cfg) {
- printk(KERN_INFO "PCI: Using configuration type 1 "
- "for extended access\n");
- raw_pci_ext_ops = &pci_direct_conf1;
- }
- } else {
- raw_pci_ops = &pci_direct_conf2;
+ if (raw_pci_ext_ops)
+ return;
+ if (!(pci_probe & PCI_HAS_IO_ECS))
+ return;
+ printk(KERN_INFO "PCI: Using configuration type 1 "
+ "for extended access\n");
+ raw_pci_ext_ops = &pci_direct_conf1;
+ return;
}
+ raw_pci_ops = &pci_direct_conf2;
}
int __init pci_direct_probe(void)
diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h
index f3972b1..fd53db5 100644
--- a/arch/x86/pci/pci.h
+++ b/arch/x86/pci/pci.h
@@ -27,6 +27,7 @@
#define PCI_CAN_SKIP_ISA_ALIGN 0x8000
#define PCI_USE__CRS 0x10000
#define PCI_CHECK_ENABLE_AMD_MMCONF 0x20000
+#define PCI_HAS_IO_ECS 0x40000
extern unsigned int pci_probe;
extern unsigned long pirq_table_addr;
diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h
index 40fcbba..0d609c8 100644
--- a/include/asm-x86/cpufeature.h
+++ b/include/asm-x86/cpufeature.h
@@ -79,7 +79,6 @@
#define X86_FEATURE_REP_GOOD (3*32+16) /* rep microcode works well on this CPU */
#define X86_FEATURE_MFENCE_RDTSC (3*32+17) /* Mfence synchronizes RDTSC */
#define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* Lfence synchronizes RDTSC */
-#define X86_FEATURE_PCI_EXT_CFG (3*32+19) /* PCI extended cfg access */
/* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
#define X86_FEATURE_XMM3 (4*32+ 0) /* Streaming SIMD Extensions-3 */
@@ -188,7 +187,6 @@ extern const char * const x86_power_flags[32];
#define cpu_has_gbpages boot_cpu_has(X86_FEATURE_GBPAGES)
#define cpu_has_arch_perfmon boot_cpu_has(X86_FEATURE_ARCH_PERFMON)
#define cpu_has_pat boot_cpu_has(X86_FEATURE_PAT)
-#define cpu_has_pci_ext_cfg boot_cpu_has(X86_FEATURE_PCI_EXT_CFG)
#if defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_64)
# define cpu_has_invlpg 1
--
1.5.5.3
next prev parent reply other threads:[~2008-06-12 19:07 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-23 12:46 Enable mmconf access to PCI ECS for all AMD fam10h systems Robert Richter
2008-05-23 17:57 ` Yinghai Lu
2008-05-23 18:18 ` Arjan van de Ven
2008-05-23 19:06 ` Yinghai Lu
2008-05-26 18:06 ` Robert Richter
2007-09-03 8:17 ` [PATCH] x86: Add PCI extended config space access for AMD Barcelona Robert Richter
2008-05-28 19:02 ` Arjan van de Ven
2008-06-02 14:19 ` Robert Richter
2008-06-03 2:35 ` Arjan van de Ven
2008-06-03 7:25 ` Robert Richter
2008-06-12 18:19 ` [PATCH 1/2] x86/pci: Renaming k8-bus_64.c to amd_bus.c Robert Richter
2008-06-12 19:51 ` Yinghai Lu
2008-06-13 12:47 ` Robert Richter
2008-06-18 7:46 ` Ingo Molnar
2008-06-19 16:02 ` Robert Richter
2008-06-12 18:19 ` Robert Richter [this message]
2008-06-12 19:50 ` [PATCH 2/2] x86: Move PCI IO ECS code to x86/pci Yinghai Lu
2008-06-13 16:19 ` Robert Richter
2008-06-13 17:02 ` Glauber Costa
2008-06-13 18:16 ` Robert Richter
2008-06-13 18:26 ` Glauber Costa
2008-06-18 7:51 ` Ingo Molnar
2008-06-18 7:47 ` Ingo Molnar
2008-06-02 9:09 ` [PATCH] x86: Add PCI extended config space access for AMD Barcelona Ingo Molnar
2008-06-02 13:56 ` Robert Richter
2008-06-02 20:31 ` Yinghai Lu
2008-06-03 7:35 ` Robert Richter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1213294763-19566-2-git-send-email-robert.richter@amd.com \
--to=robert.richter@amd.com \
--cc=andi@firstfloor.org \
--cc=arjan@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
--cc=yhlu.kernel@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome