From: Joerg Roedel <joerg.roedel@amd.com>
To: mingo@redhat.com, tglx@linutronix.de, hpa@zytor.com
Cc: linux-kernel@vger.kernel.org, iommu@lists.linux-foundation.org,
muli@il.ibm.com, Joerg Roedel <joerg.roedel@amd.com>
Subject: [PATCH 6/7] x86: cleanup dma_*_coherent functions
Date: Tue, 12 Aug 2008 17:24:16 +0200 [thread overview]
Message-ID: <1218554657-16070-7-git-send-email-joerg.roedel@amd.com> (raw)
In-Reply-To: <1218554657-16070-1-git-send-email-joerg.roedel@amd.com>
All dma_ops implementations support the alloc_coherent and free_coherent
callbacks now. This allows a big simplification of the dma_alloc_coherent
function which is done with this patch. The dma_free_coherent functions is also
cleaned up and calls now the free_coherent callback of the dma_ops
implementation.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
arch/x86/kernel/pci-dma.c | 116 ++++-----------------------------------------
1 files changed, 10 insertions(+), 106 deletions(-)
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index f704cb5..60fa80d 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -241,17 +241,6 @@ int dma_supported(struct device *dev, u64 mask)
}
EXPORT_SYMBOL(dma_supported);
-/* Allocate DMA memory on node near device */
-static noinline struct page *
-dma_alloc_pages(struct device *dev, gfp_t gfp, unsigned order)
-{
- int node;
-
- node = dev_to_node(dev);
-
- return alloc_pages_node(node, gfp, order);
-}
-
/*
* Allocate memory for a coherent mapping.
*/
@@ -260,14 +249,7 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
gfp_t gfp)
{
struct dma_mapping_ops *ops = get_dma_ops(dev);
- void *memory = NULL;
- struct page *page;
- unsigned long dma_mask = 0;
- dma_addr_t bus;
- int noretry = 0;
-
- /* ignore region specifiers */
- gfp &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32);
+ void *memory;
if (dma_alloc_from_coherent(dev, size, dma_handle, &memory))
return memory;
@@ -276,90 +258,12 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
dev = &fallback_dev;
gfp |= GFP_DMA;
}
- dma_mask = dev->coherent_dma_mask;
- if (dma_mask == 0)
- dma_mask = (gfp & GFP_DMA) ? DMA_24BIT_MASK : DMA_32BIT_MASK;
-
- /* Device not DMA able */
- if (dev->dma_mask == NULL)
- return NULL;
-
- /* Don't invoke OOM killer or retry in lower 16MB DMA zone */
- if (gfp & __GFP_DMA)
- noretry = 1;
-
-#ifdef CONFIG_X86_64
- /* Why <=? Even when the mask is smaller than 4GB it is often
- larger than 16MB and in this case we have a chance of
- finding fitting memory in the next higher zone first. If
- not retry with true GFP_DMA. -AK */
- if (dma_mask <= DMA_32BIT_MASK && !(gfp & GFP_DMA)) {
- gfp |= GFP_DMA32;
- if (dma_mask < DMA_32BIT_MASK)
- noretry = 1;
- }
-#endif
-
- again:
- page = dma_alloc_pages(dev,
- noretry ? gfp | __GFP_NORETRY : gfp, get_order(size));
- if (page == NULL)
- return NULL;
-
- {
- int high, mmu;
- bus = page_to_phys(page);
- memory = page_address(page);
- high = (bus + size) >= dma_mask;
- mmu = high;
- if (force_iommu && !(gfp & GFP_DMA))
- mmu = 1;
- else if (high) {
- free_pages((unsigned long)memory,
- get_order(size));
-
- /* Don't use the 16MB ZONE_DMA unless absolutely
- needed. It's better to use remapping first. */
- if (dma_mask < DMA_32BIT_MASK && !(gfp & GFP_DMA)) {
- gfp = (gfp & ~GFP_DMA32) | GFP_DMA;
- goto again;
- }
-
- /* Let low level make its own zone decisions */
- gfp &= ~(GFP_DMA32|GFP_DMA);
-
- if (ops->alloc_coherent)
- return ops->alloc_coherent(dev, size,
- dma_handle, gfp);
- return NULL;
- }
-
- memset(memory, 0, size);
- if (!mmu) {
- *dma_handle = bus;
- return memory;
- }
- }
-
- if (ops->alloc_coherent) {
- free_pages((unsigned long)memory, get_order(size));
- gfp &= ~(GFP_DMA|GFP_DMA32);
- return ops->alloc_coherent(dev, size, dma_handle, gfp);
- }
-
- if (ops->map_simple) {
- *dma_handle = ops->map_simple(dev, virt_to_phys(memory),
- size,
- PCI_DMA_BIDIRECTIONAL);
- if (*dma_handle != bad_dma_address)
- return memory;
- }
- if (panic_on_overflow)
- panic("dma_alloc_coherent: IOMMU overflow by %lu bytes\n",
- (unsigned long)size);
- free_pages((unsigned long)memory, get_order(size));
+ if (ops->alloc_coherent)
+ return ops->alloc_coherent(dev, size,
+ dma_handle, gfp);
return NULL;
+
}
EXPORT_SYMBOL(dma_alloc_coherent);
@@ -372,13 +276,13 @@ void dma_free_coherent(struct device *dev, size_t size,
{
struct dma_mapping_ops *ops = get_dma_ops(dev);
- int order = get_order(size);
WARN_ON(irqs_disabled()); /* for portability */
- if (dma_release_from_coherent(dev, order, vaddr))
+
+ if (dma_release_from_coherent(dev, get_order(size), vaddr))
return;
- if (ops->unmap_single)
- ops->unmap_single(dev, bus, size, 0);
- free_pages((unsigned long)vaddr, order);
+
+ if (ops->free_coherent)
+ ops->free_coherent(dev, size, vaddr, bus);
}
EXPORT_SYMBOL(dma_free_coherent);
--
1.5.3.7
next prev parent reply other threads:[~2008-08-12 15:26 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-12 15:24 [PATCH 0/7] x86 dma_*_coherent rework patchset Joerg Roedel
2008-08-12 15:24 ` [PATCH 1/7] x86: add alloc_coherent dma_ops callback to GART driver Joerg Roedel
2008-08-13 0:45 ` FUJITA Tomonori
2008-08-13 12:46 ` Joerg Roedel
2008-08-13 20:46 ` FUJITA Tomonori
2008-08-12 15:24 ` [PATCH 2/7] x86: add free_coherent " Joerg Roedel
2008-08-13 0:45 ` FUJITA Tomonori
2008-08-13 12:49 ` Joerg Roedel
2008-08-12 15:24 ` [PATCH 3/7] x86: add free_coherent dma_ops callback to Calgary IOMMU driver Joerg Roedel
2008-08-12 16:07 ` Muli Ben-Yehuda
2008-08-12 15:24 ` [PATCH 4/7] x86: add alloc_coherent dma_ops callback to NOMMU driver Joerg Roedel
2008-08-12 18:24 ` Joerg Roedel
2008-08-12 15:24 ` [PATCH 5/7] x86: add free_coherent " Joerg Roedel
2008-08-12 15:24 ` Joerg Roedel [this message]
2008-08-13 0:45 ` [PATCH 6/7] x86: cleanup dma_*_coherent functions FUJITA Tomonori
2008-08-13 12:51 ` Joerg Roedel
2008-08-12 15:24 ` [PATCH 7/7] x86, AMD IOMMU: remove obsolete FIXME comment Joerg Roedel
2008-08-12 16:06 ` [PATCH 0/7] x86 dma_*_coherent rework patchset Muli Ben-Yehuda
2008-08-12 16:49 ` Joerg Roedel
2008-08-13 0:51 ` FUJITA Tomonori
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1218554657-16070-7-git-send-email-joerg.roedel@amd.com \
--to=joerg.roedel@amd.com \
--cc=hpa@zytor.com \
--cc=iommu@lists.linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=muli@il.ibm.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®