From: James Bottomley <James.Bottomley@HansenPartnership.com>
To: Ingo Molnar <mingo@elte.hu>
Cc: linux-kernel <linux-kernel@vger.kernel.org>,
Yinghai Lu <yinghai@kernel.org>,
Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>
Subject: Re: [VOYAGER] fix smp_intr_init() compile breakage
Date: Fri, 31 Oct 2008 13:59:49 -0400 [thread overview]
Message-ID: <1225475989.3264.19.camel@localhost.localdomain> (raw)
In-Reply-To: <20081030220338.GJ30303@elte.hu>
On Thu, 2008-10-30 at 23:03 +0100, Ingo Molnar wrote:
> * James Bottomley <James.Bottomley@HansenPartnership.com> wrote:
>
> > >From 4d4d1ebea1e30d0ea51784139f18aa15acbff5d9 Mon Sep 17 00:00:00 2001
> > From: James Bottomley <James.Bottomley@HansenPartnership.com>
> > Date: Wed, 29 Oct 2008 11:13:33 -0500
> > Subject: [VOYAGER] x86: fix smp_intr_init() compile breakage
> >
> > Looks like this became static on the rest of x86. Fix it up by adding
> > an external definition to mach-voyager/setup.c
> >
> > Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
> > ---
> > arch/x86/mach-voyager/setup.c | 2 +-
> > 1 files changed, 1 insertions(+), 1 deletions(-)
> >
> > diff --git a/arch/x86/mach-voyager/setup.c b/arch/x86/mach-voyager/setup.c
> > index 6bbdd63..7c6ff1a 100644
> > --- a/arch/x86/mach-voyager/setup.c
> > +++ b/arch/x86/mach-voyager/setup.c
> > @@ -24,6 +24,7 @@ static struct irqaction irq2 = {
> > .name = "cascade",
> > };
> >
> > +extern void smp_intr_init(void);
> > void __init intr_init_hook(void)
>
> please add function prototypes to the proper .h file.
> (arch/x86/include/asm/voyager.h in this case)
>
> I'd also suggest to rename the function to voyager_smp_intr_init().
>
> Note that Voyager already has a voyager_smp_intr_init() prototype in
> voyager.h. Something like the (completely untested) patch below.
>
> Ingo
>
> ---
> arch/x86/mach-voyager/setup.c | 2 +-
> arch/x86/mach-voyager/voyager_smp.c | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/x86/mach-voyager/setup.c b/arch/x86/mach-voyager/setup.c
> index 6bbdd63..a580b95 100644
> --- a/arch/x86/mach-voyager/setup.c
> +++ b/arch/x86/mach-voyager/setup.c
> @@ -27,7 +27,7 @@ static struct irqaction irq2 = {
> void __init intr_init_hook(void)
> {
> #ifdef CONFIG_SMP
> - smp_intr_init();
> + voyager_smp_intr_init();
> #endif
>
> setup_irq(2, &irq2);
> diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c
> index ff2b2ed..95c9035 100644
> --- a/arch/x86/mach-voyager/voyager_smp.c
> +++ b/arch/x86/mach-voyager/voyager_smp.c
> @@ -1250,7 +1250,7 @@ static void handle_vic_irq(unsigned int irq, struct irq_desc *desc)
> #define QIC_SET_GATE(cpi, vector) \
> set_intr_gate((cpi) + QIC_DEFAULT_CPI_BASE, (vector))
>
> -void __init smp_intr_init(void)
> +void __init voyager_smp_intr_init(void)
> {
> int i;
Not quite: still get the undeclared function in setup.c. However, this
should work (also untested: I'm in flight at the moment).
James
---
diff --git a/arch/x86/include/asm/voyager.h b/arch/x86/include/asm/voyager.h
index 9c811d2..b3e6473 100644
--- a/arch/x86/include/asm/voyager.h
+++ b/arch/x86/include/asm/voyager.h
@@ -520,6 +520,7 @@ extern void voyager_restart(void);
extern void voyager_cat_power_off(void);
extern void voyager_cat_do_common_interrupt(void);
extern void voyager_handle_nmi(void);
+extern void voyager_smp_intr_init(void);
/* Commands for the following are */
#define VOYAGER_PSI_READ 0
#define VOYAGER_PSI_WRITE 1
diff --git a/arch/x86/mach-voyager/setup.c b/arch/x86/mach-voyager/setup.c
index 6bbdd63..a580b95 100644
--- a/arch/x86/mach-voyager/setup.c
+++ b/arch/x86/mach-voyager/setup.c
@@ -27,7 +27,7 @@ static struct irqaction irq2 = {
void __init intr_init_hook(void)
{
#ifdef CONFIG_SMP
- smp_intr_init();
+ voyager_smp_intr_init();
#endif
setup_irq(2, &irq2);
diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c
index 0f6e8a6..593967b 100644
--- a/arch/x86/mach-voyager/voyager_smp.c
+++ b/arch/x86/mach-voyager/voyager_smp.c
@@ -1248,7 +1248,7 @@ static void handle_vic_irq(unsigned int irq, struct irq_desc *desc)
#define QIC_SET_GATE(cpi, vector) \
set_intr_gate((cpi) + QIC_DEFAULT_CPI_BASE, (vector))
-void __init smp_intr_init(void)
+void __init voyager_smp_intr_init(void)
{
int i;
next prev parent reply other threads:[~2008-10-31 22:04 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-30 21:02 James Bottomley
2008-10-30 22:03 ` Ingo Molnar
2008-10-31 17:59 ` James Bottomley [this message]
2008-11-03 9:53 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1225475989.3264.19.camel@localhost.localdomain \
--to=james.bottomley@hansenpartnership.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome