From: Bryan Wu <cooloney@kernel.org>
To: bigeasy@linutronix.de, linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
Michael Hennerich <michael.hennerich@analog.com>,
Bryan Wu <cooloney@kernel.org>
Subject: [PATCH] USB/ISP1760: Add support for the generic platfrom device centralized driver model
Date: Thu, 6 Nov 2008 17:25:49 +0800 [thread overview]
Message-ID: <1225963549-9892-1-git-send-email-cooloney@kernel.org> (raw)
From: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
drivers/usb/host/isp1760-if.c | 98 +++++++++++++++++++++++++++++++++++++++++
1 files changed, 98 insertions(+), 0 deletions(-)
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index af849f5..dc16698 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -3,6 +3,7 @@
* Currently there is support for
* - OpenFirmware
* - PCI
+ * - PDEV (generic platform device centralized driver model)
*
* (c) 2007 Sebastian Siewior <bigeasy@linutronix.de>
*
@@ -23,6 +24,12 @@
#include <linux/pci.h>
#endif
+#if !defined(CONFIG_USB_ISP1760_OF) && !defined(CONFIG_USB_ISP1760_PCI)
+#define USB_ISP1760_PDEV
+#include <linux/platform_device.h>
+#include <linux/usb/isp1760.h>
+#endif
+
#ifdef CONFIG_USB_ISP1760_OF
static int of_isp1760_probe(struct of_device *dev,
const struct of_device_id *match)
@@ -286,12 +293,100 @@ static struct pci_driver isp1761_pci_driver = {
};
#endif
+#ifdef USB_ISP1760_PDEV
+static int __devinit
+isp1760_pdev_probe(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd;
+ struct resource *addr;
+ int irq;
+ unsigned int devflags = 0;
+ struct isp1760_platform_data *priv = pdev->dev.platform_data;
+
+ /* basic sanity checks first. board-specific init logic should
+ * have initialized these two resources and probably board
+ * specific platform_data. we don't probe for IRQs, and do only
+ * minimal sanity checking.
+ */
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ if (pdev->num_resources < 2)
+ return -ENODEV;
+
+ addr = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ irq = platform_get_irq(pdev, 0);
+
+ if (!addr || irq < 0)
+ return -ENODEV;
+
+ if (priv) {
+ if (priv->is_isp1761)
+ devflags |= ISP1760_FLAG_ISP1761;
+ if (priv->port1_disable)
+ devflags |= ISP1760_FLAG_PORT1_DIS;
+ if (priv->bus_width_16)
+ devflags |= ISP1760_FLAG_BUS_WIDTH_16;
+ if (priv->port1_otg)
+ devflags |= ISP1760_FLAG_OTG_EN;
+ if (priv->analog_oc)
+ devflags |= ISP1760_FLAG_ANALOG_OC;
+ if (priv->dack_polarity_high)
+ devflags |= ISP1760_FLAG_DACK_POL_HIGH;
+ if (priv->dreq_polarity_high)
+ devflags |= ISP1760_FLAG_DREQ_POL_HIGH;
+ }
+
+ hcd = isp1760_register(addr->start, resource_size(addr), irq,
+ IRQF_DISABLED | IRQF_SHARED | IRQF_TRIGGER_FALLING,
+ &pdev->dev, dev_name(&pdev->dev),
+ devflags);
+
+ if (IS_ERR(hcd))
+ return PTR_ERR(hcd);
+
+ return 0;
+}
+
+static int __devexit
+isp1760_pdev_remove(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ usb_remove_hcd(hcd);
+ iounmap(hcd->regs);
+ usb_put_hcd(hcd);
+ return 0;
+}
+
+/* this driver is exported so sl811_cs can depend on it */
+struct platform_driver isp1760_pdev_driver = {
+ .probe = isp1760_pdev_probe,
+ .remove = __devexit_p(isp1760_pdev_remove),
+ .driver = {
+ .name = "isp1760-hcd",
+ .owner = THIS_MODULE,
+ },
+};
+#endif /* USB_ISP1760_PDEV */
+
static int __init isp1760_init(void)
{
int ret = -ENODEV;
init_kmem_once();
+#ifdef USB_ISP1760_PDEV
+ ret = platform_driver_register(&isp1760_pdev_driver);
+ if (ret) {
+ deinit_kmem_cache();
+ return ret;
+ }
+#endif
+
#ifdef CONFIG_USB_ISP1760_OF
ret = of_register_platform_driver(&isp1760_of_driver);
if (ret) {
@@ -325,6 +420,9 @@ static void __exit isp1760_exit(void)
#ifdef CONFIG_USB_ISP1760_PCI
pci_unregister_driver(&isp1761_pci_driver);
#endif
+#ifdef USB_ISP1760_PDEV
+ platform_driver_unregister(&isp1760_pdev_driver);
+#endif
deinit_kmem_cache();
}
module_exit(isp1760_exit);
--
1.5.6.3
next reply other threads:[~2008-11-06 9:24 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-06 9:25 Bryan Wu [this message]
2008-11-06 17:57 ` Sebastian Andrzej Siewior
2008-11-06 19:29 ` Hennerich, Michael
2008-11-07 4:00 ` Bryan Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1225963549-9892-1-git-send-email-cooloney@kernel.org \
--to=cooloney@kernel.org \
--cc=bigeasy@linutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=michael.hennerich@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®