sø., 23.11.2008 kl. 17.25 -0500, skrev Justin Piszcz: > As the original posted stated: > > 1. please post dmesg output > 2. you may want to include your kernel .config > 3. xfs_info /dev/mdX or /dev/device may also be useful > 4. you can also check fragmentation: > # xfs_db -c frag -f /dev/md2 > actual 257492, ideal 242687, fragmentation factor 5.75% > 5. something sounds very strange, I also run XFS on a lot of systems and > have never heard of that before.. > 6. also post your /etc/fstab options > 7. what distribution are you running? > 8. are -only- the two fujitsu's (raid0) affected or are other arrays > affected on this HW as well (separate disks etc)? > 9. you can also compile in support for latency_top & power_top to see > if there is any excessive polling going on by any one specific > device/function as well 1 & 2: Oh, sorry I forgot to attach dmesg and config in the last mail. 3: root@chevrolet:~# xfs_info /dev/sdb1 meta-data=/dev/sdb1 isize=256 agcount=32, agsize=11426984 blks = sectsz=512 attr=0 data = bsize=4096 blocks=365663488, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 log =internal bsize=4096 blocks=32768, version=1 = sectsz=512 sunit=0 blks, lazy-count=0 realtime =none extsz=4096 blocks=0, rtextents=0 4: root@chevrolet:~# xfs_db -c frag -f /dev/sdb1 actual 380037, ideal 373823, fragmentation factor 1.64% 6: The only mount-option is relatime, which Ubuntu adds automatically. Hmm. I haven't tried to mount without that option. Well, didn't help without it neither, tried just now. 7: Ubuntu 8.10 Intrepid. This is a new system, and it has never run anything other than Intrepid. This affects both the standard kernel, and the vanilla 2.6.27.7 that I have compiled (dmesg and config attached is from that kernel). Have also tried both 64 bit and 32 bit (just for fun) 8: I'll explain my setup a little bit more. I explained the hardware in my first post. But I have the two Fujitsu SAS disks in RAID-0, with /dev/sda1 as root, and /dev/sda2 as home. Earlier they were both xfs, and dog slow. I have now converted both to ext3, and everything is normal. In addition I have four Seagate ST3500320AS 500GB SATA disks in hardware RAID-5 on the same controller. This 1,5TB array is still xfs. It also had and has the same symptoms. 9: I don't know how to do that. But what ever it is, it doesn't happen with ext3... Thanks for looking into this! Regards, Stian