From: Boaz Harrosh <bharrosh@panasas.com>
To: James Bottomley <James.Bottomley@HansenPartnership.com>,
Mike Christie <michaelc@cs.wisc.edu>,
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>,
Jeff Garzik <jeff@garzik.org>,
linux-scsi <linux-scsi@vger.kernel.org>,
open-osd ml <osd-dev@open-osd.org>
Cc: linux-kernel <linux-kernel@vger.kernel.org>
Subject: [PATCH 09/18] osd_ktests: Test Attribute lists
Date: Mon, 22 Dec 2008 14:57:39 +0200 [thread overview]
Message-ID: <1229950659-15923-1-git-send-email-bharrosh@panasas.com> (raw)
In-Reply-To: <494F88C0.4070507@panasas.com>
Add tests for setting/getting Attribute lists. All combinations
of read/write with set/get attributes are tested.
(6 possibilities), So all but data integrity request structure
layouts are attempted.
This test passes against the IBM-OSD-SIM OSDv1 target.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Reviewed-by: Benny Halevy <bhalevy@panasas.com>
---
drivers/scsi/osd/osd_ktests.c | 110 +++++++++++++++++++++++++++++++++++++++++
1 files changed, 110 insertions(+), 0 deletions(-)
diff --git a/drivers/scsi/osd/osd_ktests.c b/drivers/scsi/osd/osd_ktests.c
index fba4934..d098323 100644
--- a/drivers/scsi/osd/osd_ktests.c
+++ b/drivers/scsi/osd/osd_ktests.c
@@ -43,6 +43,7 @@
#include <scsi/osd_initiator.h>
#include <scsi/osd_sec.h>
+#include <scsi/osd_attributes.h>
#include "osd_ktests.h"
#include "osd_debug.h"
@@ -260,6 +261,91 @@ int ktest_remove_par(struct osd_dev *osd_dev)
return 0;
}
+int ktest_write_read_attr(struct osd_dev *osd_dev, void *buff,
+ bool doread, bool doset, bool doget)
+{
+ struct request_queue *req_q = osd_dev->scsi_device->request_queue;
+ struct osd_request *or;
+ char g_caps[OSD_CAP_LEN];
+ int ret;
+ struct bio *bio;
+ char *domsg;
+ /* set attrs */
+ static char name[] = "ktest_write_read_attr";
+ __be64 max_len = cpu_to_be64(0x80000000L);
+ struct osd_obj_id obj = {
+ .partition = first_par_id,
+ .id = first_obj_id,
+ };
+ struct osd_attr set_attrs[] = {
+ ATTR_SET(OSD_APAGE_OBJECT_QUOTAS, OSD_ATTR_OQ_MAXIMUM_LENGTH,
+ sizeof(max_len), &max_len),
+ ATTR_SET(OSD_APAGE_OBJECT_INFORMATION, OSD_ATTR_OI_USERNAME,
+ sizeof(name), name),
+ };
+ struct osd_attr get_attrs[] = {
+ ATTR_DEF(OSD_APAGE_OBJECT_INFORMATION,
+ OSD_ATTR_OI_USED_CAPACITY, sizeof(__be64)),
+ ATTR_DEF(OSD_APAGE_OBJECT_INFORMATION,
+ OSD_ATTR_OI_LOGICAL_LENGTH, sizeof(__be64)),
+ };
+
+ KTEST_START_REQ(osd_dev, or);
+ bio = bio_map_kern(req_q, buff, BUFF_SIZE, GFP_KERNEL);
+ if (!bio) {
+ OSD_ERR("!!! Failed to allocate BIO\n");
+ return -ENOMEM;
+ }
+
+ if (doread) {
+ osd_req_read(or, &obj, bio, 0);
+ domsg = "Read-with-attr";
+ } else {
+ osd_req_write(or, &obj, bio, 0);
+ domsg = "Write-with-attr";
+ }
+
+ if (doset)
+ osd_req_add_set_attr_list(or, set_attrs, 2);
+ if (doget)
+ osd_req_add_get_attr_list(or, get_attrs, 2);
+
+/* KTEST_EXEC_END(or, &obj, "");*/
+ ret = test_exec(or, g_caps, &obj);
+ if (!ret && doget) {
+ void *iter = NULL, *pFirst, *pSec;
+ int nelem = 2;
+ u64 capacity_len = ~0;
+ u64 logical_len = ~0;
+
+ osd_req_decode_get_attr_list(or, get_attrs, &nelem, &iter);
+
+ /*FIXME: Std does not guaranty order of return attrs */
+ pFirst = get_attrs[0].val_ptr;
+ if (pFirst)
+ capacity_len = get_unaligned_be64(pFirst);
+ else
+ OSD_ERR("failed to read capacity_used\n");
+ pSec = get_attrs[1].val_ptr;
+ if (pSec)
+ logical_len = get_unaligned_be64(pSec);
+ else
+ OSD_ERR("failed to read logical_length\n");
+ OSD_INFO("%s capacity=%llu len=%llu\n",
+ domsg, _LLU(capacity_len), _LLU(logical_len));
+ }
+
+ osd_end_request(or);
+ if (ret) {
+ OSD_ERR("!!! Error executing %s => %d doset=%d doget=%d\n",
+ domsg, ret, doset, doget);
+ return ret;
+ }
+ OSD_DEBUG("%s\n", domsg);
+
+ return 0;
+}
+
int do_test_17(struct osd_dev *od)
{
void *write_buff = NULL;
@@ -304,11 +390,35 @@ int do_test_17(struct osd_dev *od)
/* List all objects */
/* Write with get_attr */
+ ret = ktest_write_read_attr(od, write_buff, false, false, true);
+ if (ret)
+ goto dev_fini;
+
/* Write with set_attr */
+ ret = ktest_write_read_attr(od, write_buff, false, true, false);
+ if (ret)
+ goto dev_fini;
+
/* Write with set_attr + get_attr */
+ ret = ktest_write_read_attr(od, write_buff, false, true, true);
+ if (ret)
+ goto dev_fini;
+
/* Read with set_attr */
+ ret = ktest_write_read_attr(od, write_buff, true, true, false);
+ if (ret)
+ goto dev_fini;
+
/* Read with get_attr */
+ ret = ktest_write_read_attr(od, write_buff, true, false, true);
+ if (ret)
+ goto dev_fini;
+
/* Read with get_attr + set_attr */
+ ret = ktest_write_read_attr(od, write_buff, true, true, true);
+ if (ret)
+ goto dev_fini;
+
/* remove objects */
ret = ktest_remove_obj(od);
if (ret)
--
1.6.0.1
next prev parent reply other threads:[~2008-12-22 12:57 UTC|newest]
Thread overview: 85+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <48876009.8010701@panasas.com>
2008-11-04 16:09 ` [PATCHSET 00/18] open-osd: OSD Initiator library for Linux Boaz Harrosh
2008-11-04 16:17 ` [PATCH 01/18] major.h: char-major number for OSD device driver Boaz Harrosh
2008-11-26 17:33 ` [osd-dev] " Boaz Harrosh
2008-11-26 18:07 ` Randy Dunlap
2008-11-04 16:42 ` [PATCH 02/18] scsi: OSD_TYPE Boaz Harrosh
2008-11-04 16:44 ` [PATCH 03/18] libosd: OSDv1 Headers Boaz Harrosh
2008-11-04 19:10 ` Andrew Morton
2008-11-04 19:42 ` Jörn Engel
2008-11-04 20:29 ` Jörn Engel
2008-11-05 13:00 ` Boaz Harrosh
2008-11-05 12:54 ` Boaz Harrosh
2008-11-05 13:09 ` James Bottomley
2008-11-05 13:29 ` Boaz Harrosh
2008-11-09 14:52 ` [PATCH 03/18 ver2] " Boaz Harrosh
2008-11-09 17:45 ` Jörn Engel
2008-11-10 8:47 ` Boaz Harrosh
2008-11-10 15:17 ` Jörn Engel
2008-11-10 17:29 ` Randy Dunlap
2008-11-12 13:10 ` Boaz Harrosh
2008-11-12 16:48 ` Randy Dunlap
2008-11-12 17:09 ` Boaz Harrosh
2008-11-12 17:15 ` Johannes Berg
2008-11-12 13:13 ` [PATCH 03/18 ver3] " Boaz Harrosh
2008-11-12 18:59 ` Randy Dunlap
2008-11-13 9:38 ` Boaz Harrosh
2008-11-13 12:25 ` [PATCH 03/18 ver4] " Boaz Harrosh
2008-11-13 18:16 ` Randy Dunlap
2008-11-13 15:41 ` [osd-dev] " Benny Halevy
2008-11-04 16:44 ` [PATCH 04/18] libosd: OSDv1 preliminary implementation Boaz Harrosh
2008-11-04 18:03 ` Sam Ravnborg
2008-11-05 13:12 ` Boaz Harrosh
2008-11-09 14:55 ` [osd-dev] " Boaz Harrosh
2008-11-10 5:37 ` Randy Dunlap
2008-11-10 9:00 ` Boaz Harrosh
2008-11-05 16:39 ` [Patch] Always include <linux/types.h> Jörn Engel
2008-11-05 17:23 ` Alexey Dobriyan
2008-11-05 19:16 ` Jörn Engel
2008-11-05 19:48 ` Andreas Schwab
2008-11-05 20:02 ` Jörn Engel
2008-11-05 20:32 ` Alexey Dobriyan
2008-11-07 8:02 ` Jörn Engel
2008-11-05 20:20 ` Alexey Dobriyan
2008-11-05 17:48 ` Boaz Harrosh
2008-11-04 19:16 ` [PATCH 04/18] libosd: OSDv1 preliminary implementation Andrew Morton
2008-11-05 13:44 ` Boaz Harrosh
2008-11-09 14:50 ` [PATCH 04/18 ver2] " Boaz Harrosh
2008-11-04 16:44 ` [PATCH 05/18] osd_uld: OSD scsi ULD Boaz Harrosh
2008-11-04 16:44 ` [PATCH 06/18] osd_uld: API for retrieving osd devices from Kernel Boaz Harrosh
2008-11-04 16:44 ` [PATCH 07/18] osd_test: User-mode application to run the OSD tests Boaz Harrosh
2008-11-04 16:44 ` [PATCH 08/18] osd_ktests: Add basic " Boaz Harrosh
2008-11-04 16:44 ` [PATCH 09/18] libosd: attributes Support Boaz Harrosh
2008-11-04 16:44 ` [PATCH 10/18] osd_ktests: Test Attribute lists Boaz Harrosh
2008-11-04 16:44 ` [PATCH 11/18] libosd: OSD Security processing stubs Boaz Harrosh
2008-11-04 16:44 ` [PATCH 12/18] libosd: Add Flush and List-objects support Boaz Harrosh
2008-11-04 16:44 ` [PATCH 13/18] libosd: Not implemented commands Boaz Harrosh
2008-11-04 16:44 ` [PATCH 15/18] libosd: OSDv2 auto detection Boaz Harrosh
2008-11-04 16:44 ` [PATCH 14/18] libosd: OSD version 2 Support Boaz Harrosh
2008-11-04 16:44 ` [PATCH 16/18] osd: Documentation for OSD library Boaz Harrosh
2008-11-04 16:44 ` [PATCH 17/18] osd: Kconfig file for in-tree builds Boaz Harrosh
2008-11-04 16:44 ` [PATCH 18/18] scsi: Add osd library to build system Boaz Harrosh
2008-11-04 19:19 ` [PATCHSET 00/18] open-osd: OSD Initiator library for Linux Andrew Morton
2008-11-05 13:56 ` Boaz Harrosh
2008-11-09 14:58 ` Boaz Harrosh
2008-11-09 23:26 ` Stephen Rothwell
2008-11-10 12:52 ` Boaz Harrosh
2008-11-10 13:04 ` Stephen Rothwell
2008-12-22 12:32 ` Boaz Harrosh
2008-12-22 12:37 ` [PATCH 01/18] major.h: char-major number for OSD device driver Boaz Harrosh
2008-12-22 12:39 ` [PATCH 02/18] scsi: OSD_TYPE Boaz Harrosh
2008-12-22 12:41 ` [PATCH 03/18] libosd: OSDv1 Headers Boaz Harrosh
2008-12-22 12:43 ` [PATCH 04/18] libosd: OSDv1 preliminary implementation Boaz Harrosh
2008-12-22 12:46 ` [PATCH 05/18] osd_uld: OSD scsi ULD Boaz Harrosh
2008-12-22 12:49 ` [PATCH 06/18] osd_uld: API for retrieving osd devices from Kernel Boaz Harrosh
2008-12-22 12:51 ` [PATCH 07/18] osd_ktests: Add basic OSD tests Boaz Harrosh
2008-12-22 12:55 ` [PATCH 08/18] libosd: attributes Support Boaz Harrosh
2008-12-22 12:57 ` Boaz Harrosh [this message]
2008-12-22 13:00 ` [PATCH 10/18] libosd: OSD Security processing stubs Boaz Harrosh
2008-12-22 13:02 ` [PATCH 11/18] libosd: Add Flush and List-objects support Boaz Harrosh
2008-12-22 13:04 ` [PATCH 12/18] libosd: Not implemented commands Boaz Harrosh
2008-12-22 13:07 ` [PATCH 13/18] libosd: OSD version 2 Support Boaz Harrosh
2008-12-22 13:09 ` [PATCH 14/18] libosd: OSDv2 auto detection Boaz Harrosh
2008-12-22 13:13 ` [PATCH 15/18] libosd: SCSI/OSD Sense decoding support Boaz Harrosh
2008-12-22 13:16 ` [PATCH 16/18] osd: Documentation for OSD library Boaz Harrosh
2008-12-22 13:18 ` [PATCH 17/18] osd: Kconfig file for in-tree builds Boaz Harrosh
2008-12-22 13:20 ` [PATCH 18/18] scsi: Add osd library to build system Boaz Harrosh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1229950659-15923-1-git-send-email-bharrosh@panasas.com \
--to=bharrosh@panasas.com \
--cc=James.Bottomley@HansenPartnership.com \
--cc=fujita.tomonori@lab.ntt.co.jp \
--cc=jeff@garzik.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=michaelc@cs.wisc.edu \
--cc=osd-dev@open-osd.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®