From: Mark Fasheh <mfasheh@suse.com>
To: linux-kernel@vger.kernel.org
Cc: ocfs2-devel@oss.oracle.com, Joel Becker <joel.becker@oracle.com>,
Jan Kara <jack@suse.cz>, Mark Fasheh <mfasheh@suse.com>
Subject: [PATCH 21/56] ocfs2: Assign feature bits and system inodes to quota feature and quota files
Date: Mon, 22 Dec 2008 13:48:02 -0800 [thread overview]
Message-ID: <1229982517-3455-22-git-send-email-mfasheh@suse.com> (raw)
In-Reply-To: <1229982517-3455-1-git-send-email-mfasheh@suse.com>
From: Jan Kara <jack@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
---
fs/Kconfig | 2 ++
fs/ocfs2/inode.c | 2 ++
fs/ocfs2/ocfs2_fs.h | 21 ++++++++++++++++++---
fs/ocfs2/super.c | 17 +++++++++++++++++
4 files changed, 39 insertions(+), 3 deletions(-)
diff --git a/fs/Kconfig b/fs/Kconfig
index d99bc0a..107f1cd 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -189,6 +189,8 @@ config OCFS2_FS
select CONFIGFS_FS
select JBD2
select CRC32
+ select QUOTA
+ select QUOTA_TREE
help
OCFS2 is a general purpose extent based shared disk cluster file
system with many similarities to ext3. It supports 64 bit inode
diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c
index ec3497b..ec25d99 100644
--- a/fs/ocfs2/inode.c
+++ b/fs/ocfs2/inode.c
@@ -283,6 +283,8 @@ void ocfs2_populate_inode(struct inode *inode, struct ocfs2_dinode *fe,
mlog(0, "local alloc inode: i_ino=%lu\n", inode->i_ino);
} else if (fe->i_flags & cpu_to_le32(OCFS2_BITMAP_FL)) {
OCFS2_I(inode)->ip_flags |= OCFS2_INODE_BITMAP;
+ } else if (fe->i_flags & cpu_to_le32(OCFS2_QUOTA_FL)) {
+ inode->i_flags |= S_NOQUOTA;
} else if (fe->i_flags & cpu_to_le32(OCFS2_SUPER_BLOCK_FL)) {
mlog(0, "superblock inode: i_ino=%lu\n", inode->i_ino);
/* we can't actually hit this as read_inode can't
diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h
index 5e0c0d0..06e3bd6 100644
--- a/fs/ocfs2/ocfs2_fs.h
+++ b/fs/ocfs2/ocfs2_fs.h
@@ -94,7 +94,7 @@
| OCFS2_FEATURE_INCOMPAT_EXTENDED_SLOT_MAP \
| OCFS2_FEATURE_INCOMPAT_USERSPACE_STACK \
| OCFS2_FEATURE_INCOMPAT_XATTR)
-#define OCFS2_FEATURE_RO_COMPAT_SUPP OCFS2_FEATURE_RO_COMPAT_UNWRITTEN
+#define OCFS2_FEATURE_RO_COMPAT_SUPP (OCFS2_FEATURE_RO_COMPAT_UNWRITTEN)
/*
* Heartbeat-only devices are missing journals and other files. The
@@ -163,6 +163,12 @@
*/
#define OCFS2_FEATURE_RO_COMPAT_UNWRITTEN 0x0001
+/*
+ * Maintain quota information for this filesystem
+ */
+#define OCFS2_FEATURE_RO_COMPAT_USRQUOTA 0x0002
+#define OCFS2_FEATURE_RO_COMPAT_GRPQUOTA 0x0004
+
/* The byte offset of the first backup block will be 1G.
* The following will be 4G, 16G, 64G, 256G and 1T.
*/
@@ -192,6 +198,7 @@
#define OCFS2_HEARTBEAT_FL (0x00000200) /* Heartbeat area */
#define OCFS2_CHAIN_FL (0x00000400) /* Chain allocator */
#define OCFS2_DEALLOC_FL (0x00000800) /* Truncate log */
+#define OCFS2_QUOTA_FL (0x00001000) /* Quota file */
/*
* Flags on ocfs2_dinode.i_dyn_features
@@ -329,13 +336,17 @@ enum {
#define OCFS2_FIRST_ONLINE_SYSTEM_INODE SLOT_MAP_SYSTEM_INODE
HEARTBEAT_SYSTEM_INODE,
GLOBAL_BITMAP_SYSTEM_INODE,
-#define OCFS2_LAST_GLOBAL_SYSTEM_INODE GLOBAL_BITMAP_SYSTEM_INODE
+ USER_QUOTA_SYSTEM_INODE,
+ GROUP_QUOTA_SYSTEM_INODE,
+#define OCFS2_LAST_GLOBAL_SYSTEM_INODE GROUP_QUOTA_SYSTEM_INODE
ORPHAN_DIR_SYSTEM_INODE,
EXTENT_ALLOC_SYSTEM_INODE,
INODE_ALLOC_SYSTEM_INODE,
JOURNAL_SYSTEM_INODE,
LOCAL_ALLOC_SYSTEM_INODE,
TRUNCATE_LOG_SYSTEM_INODE,
+ LOCAL_USER_QUOTA_SYSTEM_INODE,
+ LOCAL_GROUP_QUOTA_SYSTEM_INODE,
NUM_SYSTEM_INODES
};
@@ -349,6 +360,8 @@ static struct ocfs2_system_inode_info ocfs2_system_inodes[NUM_SYSTEM_INODES] = {
[SLOT_MAP_SYSTEM_INODE] = { "slot_map", 0, S_IFREG | 0644 },
[HEARTBEAT_SYSTEM_INODE] = { "heartbeat", OCFS2_HEARTBEAT_FL, S_IFREG | 0644 },
[GLOBAL_BITMAP_SYSTEM_INODE] = { "global_bitmap", 0, S_IFREG | 0644 },
+ [USER_QUOTA_SYSTEM_INODE] = { "aquota.user", OCFS2_QUOTA_FL, S_IFREG | 0644 },
+ [GROUP_QUOTA_SYSTEM_INODE] = { "aquota.group", OCFS2_QUOTA_FL, S_IFREG | 0644 },
/* Slot-specific system inodes (one copy per slot) */
[ORPHAN_DIR_SYSTEM_INODE] = { "orphan_dir:%04d", 0, S_IFDIR | 0755 },
@@ -356,7 +369,9 @@ static struct ocfs2_system_inode_info ocfs2_system_inodes[NUM_SYSTEM_INODES] = {
[INODE_ALLOC_SYSTEM_INODE] = { "inode_alloc:%04d", OCFS2_BITMAP_FL | OCFS2_CHAIN_FL, S_IFREG | 0644 },
[JOURNAL_SYSTEM_INODE] = { "journal:%04d", OCFS2_JOURNAL_FL, S_IFREG | 0644 },
[LOCAL_ALLOC_SYSTEM_INODE] = { "local_alloc:%04d", OCFS2_BITMAP_FL | OCFS2_LOCAL_ALLOC_FL, S_IFREG | 0644 },
- [TRUNCATE_LOG_SYSTEM_INODE] = { "truncate_log:%04d", OCFS2_DEALLOC_FL, S_IFREG | 0644 }
+ [TRUNCATE_LOG_SYSTEM_INODE] = { "truncate_log:%04d", OCFS2_DEALLOC_FL, S_IFREG | 0644 },
+ [LOCAL_USER_QUOTA_SYSTEM_INODE] = { "aquota.user:%04d", OCFS2_QUOTA_FL, S_IFREG | 0644 },
+ [LOCAL_GROUP_QUOTA_SYSTEM_INODE] = { "aquota.group:%04d", OCFS2_QUOTA_FL, S_IFREG | 0644 },
};
/* Parameter passed from mount.ocfs2 to module */
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index 9e7accc..41bb019 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -225,6 +225,19 @@ static int ocfs2_sync_fs(struct super_block *sb, int wait)
return 0;
}
+static int ocfs2_need_system_inode(struct ocfs2_super *osb, int ino)
+{
+ if (!OCFS2_HAS_RO_COMPAT_FEATURE(osb->sb, OCFS2_FEATURE_RO_COMPAT_USRQUOTA)
+ && (ino == USER_QUOTA_SYSTEM_INODE
+ || ino == LOCAL_USER_QUOTA_SYSTEM_INODE))
+ return 0;
+ if (!OCFS2_HAS_RO_COMPAT_FEATURE(osb->sb, OCFS2_FEATURE_RO_COMPAT_GRPQUOTA)
+ && (ino == GROUP_QUOTA_SYSTEM_INODE
+ || ino == LOCAL_GROUP_QUOTA_SYSTEM_INODE))
+ return 0;
+ return 1;
+}
+
static int ocfs2_init_global_system_inodes(struct ocfs2_super *osb)
{
struct inode *new = NULL;
@@ -251,6 +264,8 @@ static int ocfs2_init_global_system_inodes(struct ocfs2_super *osb)
for (i = OCFS2_FIRST_ONLINE_SYSTEM_INODE;
i <= OCFS2_LAST_GLOBAL_SYSTEM_INODE; i++) {
+ if (!ocfs2_need_system_inode(osb, i))
+ continue;
new = ocfs2_get_system_file_inode(osb, i, osb->slot_num);
if (!new) {
ocfs2_release_system_inodes(osb);
@@ -281,6 +296,8 @@ static int ocfs2_init_local_system_inodes(struct ocfs2_super *osb)
for (i = OCFS2_LAST_GLOBAL_SYSTEM_INODE + 1;
i < NUM_SYSTEM_INODES;
i++) {
+ if (!ocfs2_need_system_inode(osb, i))
+ continue;
new = ocfs2_get_system_file_inode(osb, i, osb->slot_num);
if (!new) {
ocfs2_release_system_inodes(osb);
--
1.5.6
next prev parent reply other threads:[~2008-12-22 21:56 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-22 21:47 [git patches] Ocfs2 patches for merge window, batch 2/3 Mark Fasheh
2008-12-22 21:47 ` [PATCH 01/56] quota: Add callbacks for allocating and destroying dquot structures Mark Fasheh
2008-12-22 21:47 ` [PATCH 02/56] quota: Increase size of variables for limits and inode usage Mark Fasheh
2008-12-22 21:47 ` [PATCH 03/56] quota: Remove bogus 'optimization' in check_idq() and check_bdq() Mark Fasheh
2008-12-22 21:47 ` [PATCH 04/56] quota: Make _SUSPENDED just a flag Mark Fasheh
2008-12-22 21:47 ` [PATCH 05/56] quota: Allow to separately enable quota accounting and enforcing limits Mark Fasheh
2008-12-22 21:47 ` [PATCH 06/56] ext3: Use sb_any_quota_loaded() instead of sb_any_quota_enabled() Mark Fasheh
2008-12-22 21:47 ` [PATCH 07/56] ext4: " Mark Fasheh
2008-12-22 21:47 ` [PATCH 08/56] reiserfs: " Mark Fasheh
2008-12-22 21:47 ` [PATCH 09/56] quota: Remove compatibility function sb_any_quota_enabled() Mark Fasheh
2008-12-22 21:47 ` [PATCH 10/56] quota: Introduce DQUOT_QUOTA_SYS_FILE flag Mark Fasheh
2008-12-22 21:47 ` [PATCH 11/56] quota: Move quotaio_v[12].h from include/linux/ to fs/ Mark Fasheh
2008-12-22 21:47 ` [PATCH 12/56] quota: Split off quota tree handling into a separate file Mark Fasheh
2008-12-22 21:47 ` [PATCH 13/56] quota: Convert union in mem_dqinfo to a pointer Mark Fasheh
2008-12-22 21:47 ` [PATCH 14/56] quota: Allow negative usage of space and inodes Mark Fasheh
2008-12-22 21:47 ` [PATCH 15/56] quota: Keep which entries were set by SETQUOTA quotactl Mark Fasheh
2008-12-22 21:47 ` [PATCH 16/56] quota: Update version number Mark Fasheh
2008-12-22 21:47 ` [PATCH 17/56] quota: Add helpers to allow ocfs2 specific quota initialization, freeing and recovery Mark Fasheh
2008-12-22 21:47 ` [PATCH 18/56] quota: Implement function for scanning active dquots Mark Fasheh
2008-12-22 21:48 ` [PATCH 19/56] mm: Export pdflush_operation() Mark Fasheh
2008-12-23 0:01 ` Andrew Morton
2008-12-25 1:05 ` Mark Fasheh
2008-12-31 19:28 ` Mark Fasheh
2008-12-31 22:17 ` Joel Becker
2008-12-31 23:09 ` [Ocfs2-devel] " Mark Fasheh
2009-01-05 13:27 ` Jan Kara
2008-12-22 21:48 ` [PATCH 20/56] ocfs2: Support nested transactions Mark Fasheh
2008-12-22 21:48 ` Mark Fasheh [this message]
2008-12-22 21:48 ` [PATCH 22/56] ocfs2: Mark system files as not subject to quota accounting Mark Fasheh
2008-12-22 21:48 ` [PATCH 23/56] ocfs2: Implementation of local and global quota file handling Mark Fasheh
2008-12-23 0:11 ` Andrew Morton
2008-12-25 0:29 ` Mark Fasheh
2008-12-26 2:29 ` Andrew Morton
2008-12-22 21:48 ` [PATCH 24/56] ocfs2: Add quota calls for allocation and freeing of inodes and space Mark Fasheh
2008-12-22 21:48 ` [PATCH 25/56] ocfs2: Implement quota syncing thread Mark Fasheh
2008-12-22 21:48 ` [PATCH 26/56] ocfs2: Implement quota recovery Mark Fasheh
2008-12-22 21:48 ` [PATCH 27/56] ocfs2: Enable quota accounting on mount, disable on umount Mark Fasheh
2008-12-22 21:48 ` [PATCH 28/56] jbd2: Add BH_JBDPrivateStart Mark Fasheh
2008-12-22 21:48 ` [PATCH 29/56] ocfs2: Use BH_JBDPrivateStart instead of BH_Unshadow Mark Fasheh
2008-12-22 21:48 ` [PATCH 30/56] ocfs2: Add missing initialization Mark Fasheh
2008-12-22 21:48 ` [PATCH 31/56] ocfs2: Fix ocfs2_read_quota_block() error handling Mark Fasheh
2008-12-22 21:48 ` [PATCH 32/56] ocfs2: Fix oops when extending quota files Mark Fasheh
2008-12-22 21:48 ` [PATCH 33/56] ocfs2: Make ocfs2_get_quota_block() consistent with ocfs2_read_quota_block() Mark Fasheh
2008-12-22 21:48 ` [PATCH 34/56] ocfs2: Fix build warnings (64-bit types vs long long) Mark Fasheh
2008-12-22 21:48 ` [PATCH 35/56] quota: Unexport dqblk_v1.h and dqblk_v2.h Mark Fasheh
2008-12-22 21:48 ` [PATCH 36/56] quota: Export dquot_alloc() and dquot_destroy() functions Mark Fasheh
2008-12-22 21:48 ` [PATCH 37/56] reiserfs: Add default allocation routines for quota structures Mark Fasheh
2008-12-22 21:48 ` [PATCH 38/56] ext3: " Mark Fasheh
2008-12-22 21:48 ` [PATCH 39/56] ext4: " Mark Fasheh
2008-12-22 21:48 ` [PATCH 40/56] ocfs2: fix indendation in ocfs2_dquot_drop_slow Mark Fasheh
2008-12-22 21:48 ` [PATCH 41/56] ocfs2/quota: sparse fixes for quota Mark Fasheh
2008-12-22 21:48 ` [PATCH 42/56] ocfs2: Dirty the entire bucket in ocfs2_bucket_value_truncate() Mark Fasheh
2008-12-22 21:48 ` [PATCH 43/56] ocfs2: Narrow the transaction for deleting xattrs from a bucket Mark Fasheh
2008-12-22 21:48 ` [PATCH 44/56] ocfs2: Dirty the entire first bucket in ocfs2_extend_xattr_bucket() Mark Fasheh
2008-12-22 21:48 ` [PATCH 45/56] ocfs2: Dirty the entire first bucket in ocfs2_cp_xattr_cluster() Mark Fasheh
2008-12-22 21:48 ` [PATCH 46/56] ocfs2: Explain t_is_new " Mark Fasheh
2008-12-22 21:48 ` [PATCH 47/56] ocfs2: Use ocfs2_cp_xattr_bucket() in ocfs2_mv_xattr_bucket_cross_cluster() Mark Fasheh
2008-12-22 21:48 ` [PATCH 48/56] ocfs2: Rename ocfs2_cp_xattr_cluster() to ocfs2_mv_xattr_buckets() Mark Fasheh
2008-12-22 21:48 ` [PATCH 49/56] ocfs2: ocfs2_mv_xattr_buckets() can handle a partial cluster now Mark Fasheh
2008-12-22 21:48 ` [PATCH 50/56] ocfs2: Use ocfs2_mv_xattr_buckets() in ocfs2_mv_xattr_bucket_cross_cluster() Mark Fasheh
2008-12-22 21:48 ` [PATCH 51/56] ocfs2: Start using buckets in ocfs2_adjust_xattr_cross_cluster() Mark Fasheh
2008-12-22 21:48 ` [PATCH 52/56] ocfs2: Pass buckets into ocfs2_mv_xattr_bucket_cross_cluster() Mark Fasheh
2008-12-22 21:48 ` [PATCH 53/56] ocfs2: Move buckets up into ocfs2_add_new_xattr_cluster() Mark Fasheh
2008-12-22 21:48 ` [PATCH 54/56] ocfs2: Move buckets up into ocfs2_add_new_xattr_bucket() Mark Fasheh
2008-12-22 21:48 ` [PATCH 55/56] ocfs2: Pass xs->bucket " Mark Fasheh
2008-12-22 21:48 ` [PATCH 56/56] ocfs2/quota: Add QUOTA in mlog_attribute Mark Fasheh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1229982517-3455-22-git-send-email-mfasheh@suse.com \
--to=mfasheh@suse.com \
--cc=jack@suse.cz \
--cc=joel.becker@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=ocfs2-devel@oss.oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®