From: Avi Kivity <avi@redhat.com>
To: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 02/30] KVM: ia64: Add the support for translating PAL Call's pointer args
Date: Sat, 28 Feb 2009 03:41:21 +0200 [thread overview]
Message-ID: <1235785309-12835-3-git-send-email-avi@redhat.com> (raw)
In-Reply-To: <1235785309-12835-1-git-send-email-avi@redhat.com>
From: Xiantao Zhang <xiantao.zhang@intel.com>
Add the support to translate PAL Call's pointer args.
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
arch/ia64/kvm/process.c | 48 ++++++++++++++++++++++++++++++++++++++++++++--
1 files changed, 45 insertions(+), 3 deletions(-)
diff --git a/arch/ia64/kvm/process.c b/arch/ia64/kvm/process.c
index f9c9504..0e727ce 100644
--- a/arch/ia64/kvm/process.c
+++ b/arch/ia64/kvm/process.c
@@ -550,18 +550,60 @@ void reflect_interruption(u64 ifa, u64 isr, u64 iim,
inject_guest_interruption(vcpu, vector);
}
+static unsigned long kvm_trans_pal_call_args(struct kvm_vcpu *vcpu,
+ unsigned long arg)
+{
+ struct thash_data *data;
+ unsigned long gpa, poff;
+
+ if (!is_physical_mode(vcpu)) {
+ /* Depends on caller to provide the DTR or DTC mapping.*/
+ data = vtlb_lookup(vcpu, arg, D_TLB);
+ if (data)
+ gpa = data->page_flags & _PAGE_PPN_MASK;
+ else {
+ data = vhpt_lookup(arg);
+ if (!data)
+ return 0;
+ gpa = data->gpaddr & _PAGE_PPN_MASK;
+ }
+
+ poff = arg & (PSIZE(data->ps) - 1);
+ arg = PAGEALIGN(gpa, data->ps) | poff;
+ }
+ arg = kvm_gpa_to_mpa(arg << 1 >> 1);
+
+ return (unsigned long)__va(arg);
+}
+
static void set_pal_call_data(struct kvm_vcpu *vcpu)
{
struct exit_ctl_data *p = &vcpu->arch.exit_data;
+ unsigned long gr28 = vcpu_get_gr(vcpu, 28);
+ unsigned long gr29 = vcpu_get_gr(vcpu, 29);
+ unsigned long gr30 = vcpu_get_gr(vcpu, 30);
/*FIXME:For static and stacked convention, firmware
* has put the parameters in gr28-gr31 before
* break to vmm !!*/
- p->u.pal_data.gr28 = vcpu_get_gr(vcpu, 28);
- p->u.pal_data.gr29 = vcpu_get_gr(vcpu, 29);
- p->u.pal_data.gr30 = vcpu_get_gr(vcpu, 30);
+ switch (gr28) {
+ case PAL_PERF_MON_INFO:
+ case PAL_HALT_INFO:
+ p->u.pal_data.gr29 = kvm_trans_pal_call_args(vcpu, gr29);
+ p->u.pal_data.gr30 = vcpu_get_gr(vcpu, 30);
+ break;
+ case PAL_BRAND_INFO:
+ p->u.pal_data.gr29 = gr29;;
+ p->u.pal_data.gr30 = kvm_trans_pal_call_args(vcpu, gr30);
+ break;
+ default:
+ p->u.pal_data.gr29 = gr29;;
+ p->u.pal_data.gr30 = vcpu_get_gr(vcpu, 30);
+ }
+ p->u.pal_data.gr28 = gr28;
p->u.pal_data.gr31 = vcpu_get_gr(vcpu, 31);
+
p->exit_reason = EXIT_REASON_PAL_CALL;
}
--
1.6.0.6
next prev parent reply other threads:[~2009-02-28 1:43 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-28 1:41 [PATCH 00/30] KVM Updates for the 2.6.30 merge window (3/3) Avi Kivity
2009-02-28 1:41 ` [PATCH 01/30] KVM: ia64: vTLB change for enabling windows 2008 boot Avi Kivity
2009-02-28 1:41 ` Avi Kivity [this message]
2009-02-28 1:41 ` [PATCH 03/30] KVM: ia64: Implement some pal calls needed for windows 2008 Avi Kivity
2009-02-28 1:41 ` [PATCH 04/30] KVM: s390: Fix printk on SIGP set arch Avi Kivity
2009-02-28 1:41 ` [PATCH 05/30] KVM: s390: Fix problem state check for b2 intercepts Avi Kivity
2009-02-28 1:41 ` [PATCH 06/30] KVM: s390: Fix SIGP set prefix ioctl Avi Kivity
2009-02-28 1:41 ` [PATCH 07/30] KVM: ia64: dynamic nr online cpus Avi Kivity
2009-02-28 1:41 ` [PATCH 08/30] KVM: make irq ack notifications aware of routing table Avi Kivity
2009-02-28 1:41 ` [PATCH 09/30] x86: Add EFER descriptions for FFXSR Avi Kivity
2009-02-28 1:41 ` [PATCH 10/30] KVM: Add FFXSR support Avi Kivity
2009-02-28 1:41 ` [PATCH 11/30] KVM: Drop unused evaluations from string pio handlers Avi Kivity
2009-02-28 1:41 ` [PATCH 12/30] KVM: Use irq routing API for MSI Avi Kivity
2009-02-28 1:41 ` [PATCH 13/30] KVM: VMX: Use kvm_mmu_page_fault() handle EPT violation mmio Avi Kivity
2009-02-28 1:41 ` [PATCH 14/30] KVM: Fix kvmclock on !constant_tsc boxes Avi Kivity
2009-02-28 1:41 ` [PATCH 15/30] KVM: MMU: handle compound pages in kvm_is_mmio_pfn Avi Kivity
2009-02-28 1:41 ` [PATCH 16/30] KVM: MMU: remove redundant check in mmu_set_spte Avi Kivity
2009-02-28 1:41 ` [PATCH 17/30] KVM: MMU: remove assertion in kvm_mmu_alloc_page Avi Kivity
2009-02-28 1:41 ` [PATCH 18/30] KVM: Report IRQ injection status to userspace Avi Kivity
2009-02-28 1:41 ` [PATCH 19/30] KVM: SVM: set accessed bit for VMCB segment selectors Avi Kivity
2009-02-28 1:41 ` [PATCH 20/30] KVM: MMU: Fix another largepage memory leak Avi Kivity
2009-02-28 1:41 ` [PATCH 21/30] KVM: Report IRQ injection status for MSI delivered interrupts Avi Kivity
2009-02-28 1:41 ` [PATCH 22/30] KVM: ppc: Add emulation of E500 register mmucsr0 Avi Kivity
2009-02-28 1:41 ` [PATCH 23/30] KVM: define KVM_CAP_DEVICE_DEASSIGNMENT Avi Kivity
2009-02-28 1:41 ` [PATCH 24/30] KVM: fix kvm_vm_ioctl_deassign_device Avi Kivity
2009-02-28 1:41 ` [PATCH 25/30] ia64: Move the macro definitions related to MSI to one header file Avi Kivity
2009-02-28 1:41 ` [PATCH 26/30] KVM: ia64: Fix the build errors due to lack of macros related to MSI Avi Kivity
2009-02-28 1:41 ` [PATCH 27/30] KVM: VMX: Update necessary state when guest enters long mode Avi Kivity
2009-02-28 1:41 ` [PATCH 28/30] KVM: is_long_mode() should check for EFER.LMA Avi Kivity
2009-02-28 1:41 ` [PATCH 29/30] KVM: fix sparse warnings: context imbalance Avi Kivity
2009-02-28 1:41 ` [PATCH 30/30] KVM: fix sparse warnings: Should it be static? Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1235785309-12835-3-git-send-email-avi@redhat.com \
--to=avi@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome