From: Pekka Enberg <penberg@cs.helsinki.fi>
To: mingo@elte.hu
Cc: x86@kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 3/3] x86: unify free_init_pages() and free_initmem()
Date: Tue, 03 Mar 2009 13:15:06 +0200 [thread overview]
Message-ID: <1236078906.2675.18.camel@penberg-laptop> (raw)
From: Pekka Enberg <penberg@cs.helsinki.fi>
Impact: unification
This patch introduces a common arch/x86/mm/init.c and moves the identical
free_init_pages() and free_initmem() functions to the file.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
---
arch/x86/mm/Makefile | 2 +-
arch/x86/mm/init.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++
arch/x86/mm/init_32.c | 44 --------------------------------------------
arch/x86/mm/init_64.c | 44 --------------------------------------------
4 files changed, 50 insertions(+), 89 deletions(-)
create mode 100644 arch/x86/mm/init.c
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index d8cc96a..7acf85d 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -1,4 +1,4 @@
-obj-y := init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
+obj-y := init.o init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
pat.o pgtable.o gup.o
obj-$(CONFIG_X86_32) += pgtable_32.o iomap_32.o
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
new file mode 100644
index 0000000..ce6a722
--- /dev/null
+++ b/arch/x86/mm/init.c
@@ -0,0 +1,49 @@
+#include <linux/swap.h>
+#include <asm/cacheflush.h>
+#include <asm/page.h>
+#include <asm/sections.h>
+#include <asm/system.h>
+
+void free_init_pages(char *what, unsigned long begin, unsigned long end)
+{
+ unsigned long addr = begin;
+
+ if (addr >= end)
+ return;
+
+ /*
+ * If debugging page accesses then do not free this memory but
+ * mark them not present - any buggy init-section access will
+ * create a kernel page fault:
+ */
+#ifdef CONFIG_DEBUG_PAGEALLOC
+ printk(KERN_INFO "debug: unmapping init memory %08lx..%08lx\n",
+ begin, PAGE_ALIGN(end));
+ set_memory_np(begin, (end - begin) >> PAGE_SHIFT);
+#else
+ /*
+ * We just marked the kernel text read only above, now that
+ * we are going to free part of that, we need to make that
+ * writeable first.
+ */
+ set_memory_rw(begin, (end - begin) >> PAGE_SHIFT);
+
+ printk(KERN_INFO "Freeing %s: %luk freed\n", what, (end - begin) >> 10);
+
+ for (; addr < end; addr += PAGE_SIZE) {
+ ClearPageReserved(virt_to_page(addr));
+ init_page_count(virt_to_page(addr));
+ memset((void *)(addr & ~(PAGE_SIZE-1)),
+ POISON_FREE_INITMEM, PAGE_SIZE);
+ free_page(addr);
+ totalram_pages++;
+ }
+#endif
+}
+
+void free_initmem(void)
+{
+ free_init_pages("unused kernel memory",
+ (unsigned long)(&__init_begin),
+ (unsigned long)(&__init_end));
+}
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index ee4b032..6fbf39f 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -1191,50 +1191,6 @@ void mark_rodata_ro(void)
}
#endif
-void free_init_pages(char *what, unsigned long begin, unsigned long end)
-{
- unsigned long addr = begin;
-
- if (addr >= end)
- return;
-
- /*
- * If debugging page accesses then do not free this memory but
- * mark them not present - any buggy init-section access will
- * create a kernel page fault:
- */
-#ifdef CONFIG_DEBUG_PAGEALLOC
- printk(KERN_INFO "debug: unmapping init memory %08lx..%08lx\n",
- begin, PAGE_ALIGN(end));
- set_memory_np(begin, (end - begin) >> PAGE_SHIFT);
-#else
- /*
- * We just marked the kernel text read only above, now that
- * we are going to free part of that, we need to make that
- * writeable first.
- */
- set_memory_rw(begin, (end - begin) >> PAGE_SHIFT);
-
- printk(KERN_INFO "Freeing %s: %luk freed\n", what, (end - begin) >> 10);
-
- for (; addr < end; addr += PAGE_SIZE) {
- ClearPageReserved(virt_to_page(addr));
- init_page_count(virt_to_page(addr));
- memset((void *)(addr & ~(PAGE_SIZE-1)),
- POISON_FREE_INITMEM, PAGE_SIZE);
- free_page(addr);
- totalram_pages++;
- }
-#endif
-}
-
-void free_initmem(void)
-{
- free_init_pages("unused kernel memory",
- (unsigned long)(&__init_begin),
- (unsigned long)(&__init_end));
-}
-
#ifdef CONFIG_BLK_DEV_INITRD
void free_initrd_mem(unsigned long start, unsigned long end)
{
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 03da903..aae8745 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -945,50 +945,6 @@ void __init mem_init(void)
initsize >> 10);
}
-void free_init_pages(char *what, unsigned long begin, unsigned long end)
-{
- unsigned long addr = begin;
-
- if (addr >= end)
- return;
-
- /*
- * If debugging page accesses then do not free this memory but
- * mark them not present - any buggy init-section access will
- * create a kernel page fault:
- */
-#ifdef CONFIG_DEBUG_PAGEALLOC
- printk(KERN_INFO "debug: unmapping init memory %08lx..%08lx\n",
- begin, PAGE_ALIGN(end));
- set_memory_np(begin, (end - begin) >> PAGE_SHIFT);
-#else
- /*
- * We just marked the kernel text read only above, now that
- * we are going to free part of that, we need to make that
- * writeable first.
- */
- set_memory_rw(begin, (end - begin) >> PAGE_SHIFT);
-
- printk(KERN_INFO "Freeing %s: %luk freed\n", what, (end - begin) >> 10);
-
- for (; addr < end; addr += PAGE_SIZE) {
- ClearPageReserved(virt_to_page(addr));
- init_page_count(virt_to_page(addr));
- memset((void *)(addr & ~(PAGE_SIZE-1)),
- POISON_FREE_INITMEM, PAGE_SIZE);
- free_page(addr);
- totalram_pages++;
- }
-#endif
-}
-
-void free_initmem(void)
-{
- free_init_pages("unused kernel memory",
- (unsigned long)(&__init_begin),
- (unsigned long)(&__init_end));
-}
-
#ifdef CONFIG_DEBUG_RODATA
const int rodata_test_data = 0xC3;
EXPORT_SYMBOL_GPL(rodata_test_data);
--
1.5.4.3
next reply other threads:[~2009-03-03 11:15 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-03 11:15 Pekka Enberg [this message]
2009-03-03 11:24 ` [tip:x86/mm] " Pekka Enberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1236078906.2675.18.camel@penberg-laptop \
--to=penberg@cs.helsinki.fi \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®