From: James Bottomley <James.Bottomley@HansenPartnership.com>
To: LKML <linux-kernel@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@linux.intel.com>,
Ingo Molnar <mingo@elte.hu>,
James Bottomley <James.Bottomley@HansenPartnership.com>
Subject: [PATCH 08/13] [VOYAGER] x86: eliminate subarchitecture file do_timer.h
Date: Sun, 8 Mar 2009 11:48:21 -0500 [thread overview]
Message-ID: <1236530906-7175-9-git-send-email-James.Bottomley@HansenPartnership.com> (raw)
In-Reply-To: <1236530906-7175-8-git-send-email-James.Bottomley@HansenPartnership.com>
This one's a bit complex: voyager still needs a timer interrupt hook
because it doesn't have local apic timers and the scheduler relies on
each CPU ticking, so voyager must rebroadcast the pit clock.
Pull in the standard do_timer.h to time_32.c: all it was doing was
calling the global_clock_event event_handler. However, also add a
specific voyager hook: voyager_timer_interrupt().
Hedge the asm/voyager.h file around with proper include guards and
make sure voyager_timer_interrupt() is inline empty if
CONFIG_X86_VOYAGER isn't defined. Also add an is_voyager() check to
terminate the voyager_timer_interrupt() hook in case voyager is
compiled in but booted on a non-voayger architecture.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
arch/x86/include/asm/do_timer.h | 16 ----------------
arch/x86/include/asm/mach-voyager/do_timer.h | 17 -----------------
arch/x86/include/asm/voyager.h | 14 ++++++++++++++
arch/x86/kernel/time_32.c | 11 +++++++----
arch/x86/mach-voyager/voyager_basic.c | 3 +++
5 files changed, 24 insertions(+), 37 deletions(-)
delete mode 100644 arch/x86/include/asm/do_timer.h
delete mode 100644 arch/x86/include/asm/mach-voyager/do_timer.h
diff --git a/arch/x86/include/asm/do_timer.h b/arch/x86/include/asm/do_timer.h
deleted file mode 100644
index 23ecda0..0000000
--- a/arch/x86/include/asm/do_timer.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* defines for inline arch setup functions */
-#include <linux/clockchips.h>
-
-#include <asm/i8259.h>
-#include <asm/i8253.h>
-
-/**
- * do_timer_interrupt_hook - hook into timer tick
- *
- * Call the pit clock event handler. see asm/i8253.h
- **/
-
-static inline void do_timer_interrupt_hook(void)
-{
- global_clock_event->event_handler(global_clock_event);
-}
diff --git a/arch/x86/include/asm/mach-voyager/do_timer.h b/arch/x86/include/asm/mach-voyager/do_timer.h
deleted file mode 100644
index 9e5a459..0000000
--- a/arch/x86/include/asm/mach-voyager/do_timer.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* defines for inline arch setup functions */
-#include <linux/clockchips.h>
-
-#include <asm/voyager.h>
-#include <asm/i8253.h>
-
-/**
- * do_timer_interrupt_hook - hook into timer tick
- *
- * Call the pit clock event handler. see asm/i8253.h
- **/
-static inline void do_timer_interrupt_hook(void)
-{
- global_clock_event->event_handler(global_clock_event);
- voyager_timer_interrupt();
-}
-
diff --git a/arch/x86/include/asm/voyager.h b/arch/x86/include/asm/voyager.h
index c03a6aa..b38a241 100644
--- a/arch/x86/include/asm/voyager.h
+++ b/arch/x86/include/asm/voyager.h
@@ -3,11 +3,15 @@
* Author: J.E.J.Bottomley@HansenPartnership.com
*
* Standard include definitions for the NCR Voyager system */
+#ifndef _ASM_VOYAGER_H
+#define _ASM_VOYAGER_H
#include <asm/voyager_bios.h>
#include <asm/voyager_boot.h>
#include <asm/voyager_vectors.h>
+#ifdef CONFIG_X86_VOYAGER
+
#undef VOYAGER_DEBUG
#undef VOYAGER_CAT_DEBUG
@@ -530,3 +534,13 @@ extern asmlinkage void qic_invalidate_interrupt(void);
extern asmlinkage void qic_reschedule_interrupt(void);
extern asmlinkage void qic_enable_irq_interrupt(void);
extern asmlinkage void qic_call_function_interrupt(void);
+
+#else /* CONFIG_X86_VOYAGER */
+
+static inline void voyager_timer_interrupt(void)
+{
+}
+
+#endif /* CONFIG_X86_VOYAGER */
+
+#endif
diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c
index 5c5d87f..dcbe82a 100644
--- a/arch/x86/kernel/time_32.c
+++ b/arch/x86/kernel/time_32.c
@@ -28,6 +28,7 @@
* serialize accesses to xtime/lost_ticks).
*/
+#include <linux/clockchips.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/time.h>
@@ -37,8 +38,9 @@
#include <asm/hpet.h>
#include <asm/time.h>
#include <asm/timer.h>
-
-#include <asm/do_timer.h>
+#include <asm/i8253.h>
+#include <asm/i8259.h>
+#include <asm/voyager.h>
int timer_ack;
@@ -91,8 +93,9 @@ irqreturn_t timer_interrupt(int irq, void *dev_id)
spin_unlock(&i8259A_lock);
}
#endif
-
- do_timer_interrupt_hook();
+ if (global_clock_event->event_handler)
+ global_clock_event->event_handler(global_clock_event);
+ voyager_timer_interrupt();
#ifdef CONFIG_MCA
if (MCA_bus) {
diff --git a/arch/x86/mach-voyager/voyager_basic.c b/arch/x86/mach-voyager/voyager_basic.c
index 7581b5f..7c97c9a 100644
--- a/arch/x86/mach-voyager/voyager_basic.c
+++ b/arch/x86/mach-voyager/voyager_basic.c
@@ -161,6 +161,9 @@ int __init voyager_memory_detect(int region, __u32 * start, __u32 * length)
* internal timer (The QIC does, but that's another story). */
void voyager_timer_interrupt(void)
{
+ if (!is_voyager())
+ return;
+
if ((jiffies & 0x3ff) == 0) {
/* There seems to be something flaky in either
--
1.6.1.3
next prev parent reply other threads:[~2009-03-08 16:51 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-08 16:48 [PATCH 00/13] convert voyager over to the x86 quirks model James Bottomley
2009-03-08 16:48 ` [PATCH 01/13] [VOYAGER] x86: add {safe,hard}_smp_processor_id to smp_ops James Bottomley
2009-03-08 16:48 ` [PATCH 02/13] [VOYAGER] x86/mca: make mca_nmi_hook external James Bottomley
2009-03-08 16:48 ` [PATCH 03/13] [VOYAGER] x86: add prefill_possible_map to x86_quirks James Bottomley
2009-03-08 16:48 ` [PATCH 04/13] [VOYAGER] x86: use boot_cpu_id instead of zero for checking boot processor James Bottomley
2009-03-08 16:48 ` [PATCH 05/13] [VOYAGER] x86/voyager: Move voyager detection to a new bootparam area James Bottomley
2009-03-08 16:48 ` [PATCH 06/13] [VOYAGER] x86: eliminate subarchitecture file setup_arch.h James Bottomley
2009-03-08 16:48 ` [PATCH 07/13] [VOYAGER] x86: eliminate subarchitecture file entry_arch.h James Bottomley
2009-03-08 16:48 ` James Bottomley [this message]
2009-03-08 16:48 ` [PATCH 09/13] [VOYAGER] x86: redo irq2 cascade setup James Bottomley
2009-03-08 16:48 ` [PATCH 10/13] [VOYAGER] x86: make disabling the apics functional instead of a flag James Bottomley
2009-03-08 16:48 ` [PATCH 11/13] [VOYAGER] x86/Voyager: add missing QIC call function single gate James Bottomley
2009-03-08 16:48 ` [PATCH 12/13] [VOYAGER] x86/Voyager: replace inline io area reads with readX accessors James Bottomley
2009-03-08 16:48 ` [PATCH 13/13] [VOYAGER] x86/Voyager: Plumb voyager back into the build James Bottomley
2009-03-08 17:15 ` [PATCH 01/13] [VOYAGER] x86: add {safe,hard}_smp_processor_id to smp_ops Jeremy Fitzhardinge
2009-03-08 17:23 ` James Bottomley
2009-03-09 20:54 ` [PATCH 00/13] convert voyager over to the x86 quirks model Sam Ravnborg
2009-03-10 21:58 ` Yinghai Lu
2009-03-10 22:02 ` James Bottomley
2009-03-10 22:37 ` Ingo Molnar
2009-03-11 15:41 ` James Bottomley
2009-03-11 17:26 ` H. Peter Anvin
2009-03-11 18:53 ` James Bottomley
2009-03-11 22:55 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1236530906-7175-9-git-send-email-James.Bottomley@HansenPartnership.com \
--to=james.bottomley@hansenpartnership.com \
--cc=hpa@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®