From: Harry Ciao <qingtao.cao@windriver.com>
To: linux-kernel@vger.kernel.org, bluesmoke-devel@lists.sourceforge.net
Subject: [v2 PATCH 1/7] EDAC: AMD8111 driver header file
Date: Wed, 11 Mar 2009 11:25:51 +0800 [thread overview]
Message-ID: <1236741957-3570-2-git-send-email-qingtao.cao@windriver.com> (raw)
In-Reply-To: <1236741957-3570-1-git-send-email-qingtao.cao@windriver.com>
Introduce AMD8111 EDAC driver header file, which adds register and bits
definitions for the LPC Bridge Controller and PCI Bridge Controller on
the AMD8111 HyperTransport I/O Hub.
Signed-off-by: Harry Ciao <qingtao.cao@windriver.com>
---
drivers/edac/amd8111_edac.h | 130 +++++++++++++++++++++++++++++++++++++++++++
1 files changed, 130 insertions(+), 0 deletions(-)
create mode 100644 drivers/edac/amd8111_edac.h
diff --git a/drivers/edac/amd8111_edac.h b/drivers/edac/amd8111_edac.h
new file mode 100644
index 0000000..ef9eb36
--- /dev/null
+++ b/drivers/edac/amd8111_edac.h
@@ -0,0 +1,130 @@
+/*
+ * amd8111_edac.h, EDAC defs for AMD8111 hypertransport chip
+ *
+ * Copyright (c) 2008 Wind River Systems, Inc.
+ *
+ * Authors: Cao Qingtao <qingtao.cao@windriver.com>
+ * Benjamin Walsh <benjamin.walsh@windriver.com>
+ * Hu Yongqi <yongqi.hu@windriver.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _AMD8111_EDAC_H_
+#define _AMD8111_EDAC_H_
+
+/************************************************************
+ * PCI Bridge Status and Command Register, DevA:0x04
+ ************************************************************/
+#define REG_PCI_STSCMD 0x04
+enum pci_stscmd_bits {
+ PCI_STSCMD_SSE = BIT(30),
+ PCI_STSCMD_RMA = BIT(29),
+ PCI_STSCMD_RTA = BIT(28),
+ PCI_STSCMD_SERREN = BIT(8),
+ PCI_STSCMD_CLEAR_MASK = (PCI_STSCMD_SSE |
+ PCI_STSCMD_RMA |
+ PCI_STSCMD_RTA)
+};
+
+/************************************************************
+ * PCI Bridge Memory Base-Limit Register, DevA:0x1c
+ ************************************************************/
+#define REG_MEM_LIM 0x1c
+enum mem_limit_bits {
+ MEM_LIMIT_DPE = BIT(31),
+ MEM_LIMIT_RSE = BIT(30),
+ MEM_LIMIT_RMA = BIT(29),
+ MEM_LIMIT_RTA = BIT(28),
+ MEM_LIMIT_STA = BIT(27),
+ MEM_LIMIT_MDPE = BIT(24),
+ MEM_LIMIT_CLEAR_MASK = (MEM_LIMIT_DPE |
+ MEM_LIMIT_RSE |
+ MEM_LIMIT_RMA |
+ MEM_LIMIT_RTA |
+ MEM_LIMIT_STA |
+ MEM_LIMIT_MDPE)
+};
+
+/************************************************************
+ * HyperTransport Link Control Register, DevA:0xc4
+ ************************************************************/
+#define REG_HT_LINK 0xc4
+enum ht_link_bits {
+ HT_LINK_LKFAIL = BIT(4),
+ HT_LINK_CRCFEN = BIT(1),
+ HT_LINK_CLEAR_MASK = (HT_LINK_LKFAIL)
+};
+
+/************************************************************
+ * PCI Bridge Interrupt and Bridge Control, DevA:0x3c
+ ************************************************************/
+#define REG_PCI_INTBRG_CTRL 0x3c
+enum pci_intbrg_ctrl_bits {
+ PCI_INTBRG_CTRL_DTSERREN = BIT(27),
+ PCI_INTBRG_CTRL_DTSTAT = BIT(26),
+ PCI_INTBRG_CTRL_MARSP = BIT(21),
+ PCI_INTBRG_CTRL_SERREN = BIT(17),
+ PCI_INTBRG_CTRL_PEREN = BIT(16),
+ PCI_INTBRG_CTRL_CLEAR_MASK = (PCI_INTBRG_CTRL_DTSTAT),
+ PCI_INTBRG_CTRL_POLL_MASK = (PCI_INTBRG_CTRL_DTSERREN |
+ PCI_INTBRG_CTRL_MARSP |
+ PCI_INTBRG_CTRL_SERREN)
+};
+
+/************************************************************
+ * I/O Control 1 Register, DevB:0x40
+ ************************************************************/
+#define REG_IO_CTRL_1 0x40
+enum io_ctrl_1_bits {
+ IO_CTRL_1_NMIONERR = BIT(7),
+ IO_CTRL_1_LPC_ERR = BIT(6),
+ IO_CTRL_1_PW2LPC = BIT(1),
+ IO_CTRL_1_CLEAR_MASK = (IO_CTRL_1_LPC_ERR | IO_CTRL_1_PW2LPC)
+};
+
+/************************************************************
+ * Legacy I/O Space Registers
+ ************************************************************/
+#define REG_AT_COMPAT 0x61
+enum at_compat_bits {
+ AT_COMPAT_SERR = BIT(7),
+ AT_COMPAT_IOCHK = BIT(6),
+ AT_COMPAT_CLRIOCHK = BIT(3),
+ AT_COMPAT_CLRSERR = BIT(2),
+};
+
+struct amd8111_dev_info {
+ u16 err_dev; /* PCI Device ID */
+ struct pci_dev *dev;
+ int edac_idx; /* device index */
+ const char *ctl_name;
+ struct edac_device_ctl_info *edac_dev;
+ void (*init)(struct amd8111_dev_info *dev_info);
+ void (*exit)(struct amd8111_dev_info *dev_info);
+ void (*check)(struct edac_device_ctl_info *edac_dev);
+};
+
+struct amd8111_pci_info {
+ u16 err_dev; /* PCI Device ID */
+ struct pci_dev *dev;
+ int edac_idx; /* pci index */
+ const char *ctl_name;
+ struct edac_pci_ctl_info *edac_dev;
+ void (*init)(struct amd8111_pci_info *dev_info);
+ void (*exit)(struct amd8111_pci_info *dev_info);
+ void (*check)(struct edac_pci_ctl_info *edac_dev);
+};
+
+#endif /* _AMD8111_EDAC_H_ */
--
1.5.6.2
next prev parent reply other threads:[~2009-03-11 3:38 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-11 3:25 [v2 PATCH 0/7] Add AMD8111 and AMD8131 EDAC drivers Harry Ciao
2009-03-11 3:25 ` Harry Ciao [this message]
2009-03-11 3:25 ` [v2 PATCH 2/7] EDAC: AMD8111 driver source file Harry Ciao
2009-03-11 3:25 ` [v2 PATCH 3/7] EDAC: AMD8111 driver Kconfig and Makefile Harry Ciao
2009-03-11 3:25 ` [v2 PATCH 4/7] EDAC: Add edac_pci_alloc_index() Harry Ciao
2009-03-11 3:25 ` [v2 PATCH 5/7] EDAC: AMD8131 driver header file Harry Ciao
2009-03-11 3:25 ` [v2 PATCH 6/7] EDAC: AMD8131 driver source file Harry Ciao
2009-03-11 3:25 ` [v2 PATCH 7/7] EDAC: AMD8131 driver Kconfig and Makefile Harry Ciao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1236741957-3570-2-git-send-email-qingtao.cao@windriver.com \
--to=qingtao.cao@windriver.com \
--cc=bluesmoke-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®