From: Jeremy Fitzhardinge <jeremy@goop.org>
To: "H. Peter Anvin" <hpa@zytor.com>
Cc: the arch/x86 maintainers <x86@kernel.org>,
Ingo Molnar <mingo@elte.hu>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Xen-devel <xen-devel@lists.xensource.com>,
Ian Campbell <ian.campbell@citrix.com>,
Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Subject: [PATCH 10/15] xen: clear reserved bits in l3 entries given in the initial pagetables
Date: Mon, 23 Mar 2009 11:09:54 -0700 [thread overview]
Message-ID: <1237831799-6568-11-git-send-email-jeremy@goop.org> (raw)
In-Reply-To: <49C45238.7050007@zytor.com>
From: Ian Campbell <ian.campbell@citrix.com>
Impact: workaround Xen bug in 32-on-64 dom0
In native PAE, the only flag that may be legitimately set in an L3
entry is Present. When Xen grafts the top-level PAE L3 pagetable
entries into the L4 pagetable, it must also set the other permissions
flags so that the mapped pages are actually accessible.
However, due to a bug in the hypervisor, it validates update to the L3
entries as formal PAE entries, so it will refuse to validate these
entries with the extra bits requires for 4-level pagetables.
This patch simply masks the entries back to the bare PAE level,
leaving Xen to add whatever bits it feels are necessary.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
arch/x86/xen/mmu.c | 15 +++++++++++++++
1 files changed, 15 insertions(+), 0 deletions(-)
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 2834852..463a819 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1855,6 +1855,7 @@ __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
unsigned long max_pfn)
{
pmd_t *kernel_pmd;
+ int i;
max_pfn_mapped = PFN_DOWN(__pa(xen_start_info->pt_base) +
xen_start_info->nr_pt_frames * PAGE_SIZE +
@@ -1866,6 +1867,20 @@ __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
xen_map_identity_early(level2_kernel_pgt, max_pfn);
memcpy(swapper_pg_dir, pgd, sizeof(pgd_t) * PTRS_PER_PGD);
+
+ /*
+ * When running a 32 bit domain 0 on a 64 bit hypervisor a
+ * pinned L3 (such as the initial pgd here) contains bits
+ * which are reserved in the PAE layout but not in the 64 bit
+ * layout. Unfortunately some versions of the hypervisor
+ * (incorrectly) validate compat mode guests against the PAE
+ * layout and hence will not allow such a pagetable to be
+ * pinned by the guest. Therefore we mask off only the PFN and
+ * Present bits of the supplied L3.
+ */
+ for (i = 0; i < PTRS_PER_PGD; i++)
+ swapper_pg_dir[i].pgd &= (PTE_PFN_MASK | _PAGE_PRESENT);
+
set_pgd(&swapper_pg_dir[KERNEL_PGD_BOUNDARY],
__pgd(__pa(level2_kernel_pgt) | _PAGE_PRESENT));
--
1.6.0.6
next prev parent reply other threads:[~2009-03-23 18:12 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <49C28AC2.4010407@goop.org>
[not found] ` <49C29381.9050201@zytor.com>
[not found] ` <49C29983.3040305@goop.org>
[not found] ` <49C2ABCA.6010009@zytor.com>
[not found] ` <49C43D31.7040805@goop.org>
[not found] ` <49C45238.7050007@zytor.com>
2009-03-23 17:38 ` [GIT PULL] x86/paravirt: allow preemption while doing lazy mmu update Jeremy Fitzhardinge
2009-03-23 17:45 ` [GIT PULL] core Xen updates for 2.6.30 Jeremy Fitzhardinge
2009-03-23 17:55 ` [GIT PULL] xen domU control interfaces Jeremy Fitzhardinge
2009-03-23 17:55 ` [PATCH 01/11] xen: add irq_from_evtchn Jeremy Fitzhardinge
2009-03-23 17:55 ` [PATCH 02/11] xen: add /dev/xen/evtchn driver Jeremy Fitzhardinge
2009-03-23 17:55 ` [PATCH 03/11] xen: export ioctl headers to userspace Jeremy Fitzhardinge
2009-03-23 17:55 ` [PATCH 04/11] xen/dev-evtchn: clean up locking in evtchn Jeremy Fitzhardinge
2009-03-23 17:55 ` [PATCH 05/11] xen: add "capabilities" file Jeremy Fitzhardinge
2009-03-23 17:55 ` [PATCH 06/11] xen: add /sys/hypervisor support Jeremy Fitzhardinge
2009-03-23 17:55 ` [PATCH 07/11] xen/sys/hypervisor: change writable_pt to features Jeremy Fitzhardinge
2009-03-23 17:55 ` [PATCH 08/11] xen: drop kexec bits from /sys/hypervisor since kexec isn't implemented yet Jeremy Fitzhardinge
2009-03-23 17:55 ` [PATCH 09/11] xen: remove suspend_cancel hook Jeremy Fitzhardinge
2009-03-23 17:55 ` [PATCH 10/11] xen: use device model for suspending xenbus devices Jeremy Fitzhardinge
2009-03-23 17:55 ` [PATCH 11/11] xen/xenbus: export xenbus_dev_changed Jeremy Fitzhardinge
2009-03-23 18:09 ` [GIT PULL] xen/dom0: core dom0 support Jeremy Fitzhardinge
2009-03-23 18:09 ` [PATCH 01/15] xen dom0: Make hvc_xen console work for dom0 Jeremy Fitzhardinge
2009-03-23 18:09 ` [PATCH 02/15] xen dom0: Initialize xenbus " Jeremy Fitzhardinge
2009-03-23 18:09 ` [PATCH 03/15] xen dom0: Set up basic IO permissions " Jeremy Fitzhardinge
2009-03-23 18:09 ` [PATCH 04/15] xen dom0: Add support for the platform_ops hypercall Jeremy Fitzhardinge
2009-03-23 18:09 ` [PATCH 05/15] xen mtrr: Add mtrr_ops support for Xen mtrr Jeremy Fitzhardinge
2009-03-23 18:09 ` [PATCH 06/15] xen: disable PAT Jeremy Fitzhardinge
2009-03-23 18:09 ` [PATCH 07/15] xen/dom0: use _PAGE_IOMAP in ioremap to do machine mappings Jeremy Fitzhardinge
2009-03-23 18:09 ` [PATCH 08/15] xen/dom0: Use host E820 map Jeremy Fitzhardinge
2009-03-23 18:09 ` [PATCH 09/15] xen: implement XENMEM_machphys_mapping Jeremy Fitzhardinge
2009-03-23 18:09 ` Jeremy Fitzhardinge [this message]
2009-03-23 18:09 ` [PATCH 11/15] xen: allow enable use of VGA console on dom0 Jeremy Fitzhardinge
2009-03-23 18:09 ` [PATCH 12/15] xen/dom0: add XEN_DOM0 config option Jeremy Fitzhardinge
2009-03-23 18:09 ` [PATCH 13/15] x86: make /dev/mem mappings _PAGE_IOMAP Jeremy Fitzhardinge
2009-03-23 18:09 ` [PATCH 14/15] paravirtualize IO permission bitmap Jeremy Fitzhardinge
2009-03-23 18:09 ` [PATCH 15/15] x86: don't need "changed" parameter for set_io_bitmap() Jeremy Fitzhardinge
2009-03-13 16:29 [GIT PULL] Xen dom0 core changes Jeremy Fitzhardinge
2009-03-13 16:29 ` [PATCH 10/15] xen: clear reserved bits in l3 entries given in the initial pagetables Jeremy Fitzhardinge
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1237831799-6568-11-git-send-email-jeremy@goop.org \
--to=jeremy@goop.org \
--cc=hpa@zytor.com \
--cc=ian.campbell@citrix.com \
--cc=jeremy.fitzhardinge@citrix.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=x86@kernel.org \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome