Re: [REGRESSION] threaded interrupt handler support breaks (some) irq handling on AVR32

[Ben Nizette <bn@niasdigital.com>]

On Tue, 2009-04-14 at 18:37 +1000, Ben Nizette wrote:

> If no one beats me to it i'll try and scatter printks and narrow down
> exactly *where* it all explodes tomorrow.

static irqreturn_t ads7846_irq(int irq, void *handle)
{
	struct ads7846 *ts = handle;
	unsigned long flags;

	spin_lock_irqsave(&ts->lock, flags);
	if (likely(get_pendown_state(ts))) {
		if (!ts->irq_disabled) {
			/* The ARM do_simple_IRQ() dispatcher doesn't act
			 * like the other dispatchers:  it will report IRQs
			 * even after they've been disabled.  We work around
			 * that here.  (The "generic irq" framework may help...)
			 */
			ts->irq_disabled = 1;
			disable_irq(ts->spi->irq);
			ts->pending = 1;
			hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY),
					HRTIMER_MODE_REL);
		}
	}
	spin_unlock_irqrestore(&ts->lock, flags);

	return IRQ_HANDLED;
}

Right, a scattering of printks in there shows execution gets at least as
far as inside the inner-most code block.  A printk directly before the
disable_irq() doesn't make it to my console so I'm guessing that the
hang is in there somewhere.

Hope this helps,
	--Ben.