From: Chengming Zhou <zhouchengming@bytedance.com>
To: peterz@infradead.org, vschneid@redhat.com
Cc: linux-kernel@vger.kernel.org, mingo@redhat.com,
juri.lelli@redhat.com, vincent.guittot@linaro.org,
dietmar.eggemann@arm.com, rostedt@goodmis.org,
bsegall@google.com, mgorman@suse.de
Subject: Re: [PATCH v3] sched/core: Minor optimize ttwu_runnable()
Date: Fri, 2 Dec 2022 15:19:35 +0800 [thread overview]
Message-ID: <1241dbfb-9d67-9723-646f-b1301b16cd22@bytedance.com> (raw)
In-Reply-To: <20221112033910.73273-1-zhouchengming@bytedance.com>
On 2022/11/12 11:39, Chengming Zhou wrote:
> ttwu_runnable() is used as a fast wakeup path when the wakee task
> is running on CPU or runnable on RQ, in both cases we can just
> set its state to TASK_RUNNING to prevent a sleep.
>
> If the wakee task is on_cpu running, we don't need to update_rq_clock()
> or check_preempt_curr().
>
> But if the wakee task is on_rq && !on_cpu (e.g. an IRQ hit before
> the task got to schedule() and the task been preempted), we should
> check_preempt_curr() to see if it can preempt the current running.
>
> This patch reorg ttwu_do_wakeup() and ttwu_do_activate() to make
> ttwu_do_wakeup() only mark the task runnable, so it can be used
> in ttwu_runnable() and try_to_wake_up() fast paths.
>
> This also removes the class->task_woken() callback from ttwu_runnable(),
> which wasn't required per the RT/DL implementations: any required push
> operation would have been queued during class->set_next_task() when p
> got preempted.
>
> ttwu_runnable() also loses the update to rq->idle_stamp, as by definition
> the rq cannot be idle in this scenario.
>
> Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
> Suggested-by: Valentin Schneider <vschneid@redhat.com>
> Suggested-by: Peter Zijlstra <peterz@infradead.org>
> Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Hello, ping...
Thanks.
> ---
> v3:
> - Improve the changelog per Valentin Schneider. Thanks!
>
> v2:
> - keep check_preempt_curr() for on_rq && !on_cpu case in ttwu_runnable(),
> per Valentin Schneider.
> - reorg ttwu_do_wakeup() and ttwu_do_activate() code, so ttwu_do_wakeup()
> can be reused in ttwu_runnable(), per Peter Zijlstra.
> - reuse ttwu_do_wakeup() in try_to_wake_up() (p == current) fast path too,
> so ttwu_do_wakeup() become the only place we mark task runnable.
> ---
> kernel/sched/core.c | 73 ++++++++++++++++++++++++---------------------
> 1 file changed, 39 insertions(+), 34 deletions(-)
>
> diff --git a/kernel/sched/core.c b/kernel/sched/core.c
> index 15e167a1c5bd..78b5075191b4 100644
> --- a/kernel/sched/core.c
> +++ b/kernel/sched/core.c
> @@ -3623,14 +3623,39 @@ ttwu_stat(struct task_struct *p, int cpu, int wake_flags)
> }
>
> /*
> - * Mark the task runnable and perform wakeup-preemption.
> + * Mark the task runnable.
> */
> -static void ttwu_do_wakeup(struct rq *rq, struct task_struct *p, int wake_flags,
> - struct rq_flags *rf)
> +static inline void ttwu_do_wakeup(struct task_struct *p)
> {
> - check_preempt_curr(rq, p, wake_flags);
> WRITE_ONCE(p->__state, TASK_RUNNING);
> trace_sched_wakeup(p);
> +}
> +
> +static void
> +ttwu_do_activate(struct rq *rq, struct task_struct *p, int wake_flags,
> + struct rq_flags *rf)
> +{
> + int en_flags = ENQUEUE_WAKEUP | ENQUEUE_NOCLOCK;
> +
> + lockdep_assert_rq_held(rq);
> +
> + if (p->sched_contributes_to_load)
> + rq->nr_uninterruptible--;
> +
> +#ifdef CONFIG_SMP
> + if (wake_flags & WF_MIGRATED)
> + en_flags |= ENQUEUE_MIGRATED;
> + else
> +#endif
> + if (p->in_iowait) {
> + delayacct_blkio_end(p);
> + atomic_dec(&task_rq(p)->nr_iowait);
> + }
> +
> + activate_task(rq, p, en_flags);
> + check_preempt_curr(rq, p, wake_flags);
> +
> + ttwu_do_wakeup(p);
>
> #ifdef CONFIG_SMP
> if (p->sched_class->task_woken) {
> @@ -3660,31 +3685,6 @@ static void ttwu_do_wakeup(struct rq *rq, struct task_struct *p, int wake_flags,
> #endif
> }
>
> -static void
> -ttwu_do_activate(struct rq *rq, struct task_struct *p, int wake_flags,
> - struct rq_flags *rf)
> -{
> - int en_flags = ENQUEUE_WAKEUP | ENQUEUE_NOCLOCK;
> -
> - lockdep_assert_rq_held(rq);
> -
> - if (p->sched_contributes_to_load)
> - rq->nr_uninterruptible--;
> -
> -#ifdef CONFIG_SMP
> - if (wake_flags & WF_MIGRATED)
> - en_flags |= ENQUEUE_MIGRATED;
> - else
> -#endif
> - if (p->in_iowait) {
> - delayacct_blkio_end(p);
> - atomic_dec(&task_rq(p)->nr_iowait);
> - }
> -
> - activate_task(rq, p, en_flags);
> - ttwu_do_wakeup(rq, p, wake_flags, rf);
> -}
> -
> /*
> * Consider @p being inside a wait loop:
> *
> @@ -3718,9 +3718,15 @@ static int ttwu_runnable(struct task_struct *p, int wake_flags)
>
> rq = __task_rq_lock(p, &rf);
> if (task_on_rq_queued(p)) {
> - /* check_preempt_curr() may use rq clock */
> - update_rq_clock(rq);
> - ttwu_do_wakeup(rq, p, wake_flags, &rf);
> + if (!task_on_cpu(rq, p)) {
> + /*
> + * When on_rq && !on_cpu the task is preempted, see if
> + * it should preempt whatever is current there now.
> + */
> + update_rq_clock(rq);
> + check_preempt_curr(rq, p, wake_flags);
> + }
> + ttwu_do_wakeup(p);
> ret = 1;
> }
> __task_rq_unlock(rq, &rf);
> @@ -4082,8 +4088,7 @@ try_to_wake_up(struct task_struct *p, unsigned int state, int wake_flags)
> goto out;
>
> trace_sched_waking(p);
> - WRITE_ONCE(p->__state, TASK_RUNNING);
> - trace_sched_wakeup(p);
> + ttwu_do_wakeup(p);
> goto out;
> }
>
next prev parent reply other threads:[~2022-12-02 7:19 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-12 3:39 Chengming Zhou
2022-12-02 7:19 ` Chengming Zhou [this message]
2022-12-02 7:36 ` Bagas Sanjaya
2022-12-02 7:57 ` Chengming Zhou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1241dbfb-9d67-9723-646f-b1301b16cd22@bytedance.com \
--to=zhouchengming@bytedance.com \
--cc=bsegall@google.com \
--cc=dietmar.eggemann@arm.com \
--cc=juri.lelli@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mgorman@suse.de \
--cc=mingo@redhat.com \
--cc=peterz@infradead.org \
--cc=rostedt@goodmis.org \
--cc=vincent.guittot@linaro.org \
--cc=vschneid@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®