From: Michal Simek <monstr@monstr.eu>
To: linux-kernel@vger.kernel.org
Cc: john.williams@petalogix.com, microblaze-uclinux@itee.uq.edu.au,
michal.simek@petalogix.com, Michal Simek <monstr@monstr.eu>
Subject: [PATCH 06/29] microblaze_mmu_v2: mmu.h update
Date: Wed, 27 May 2009 08:47:31 +0200 [thread overview]
Message-ID: <1243406874-3917-7-git-send-email-monstr@monstr.eu> (raw)
In-Reply-To: <1243406874-3917-6-git-send-email-monstr@monstr.eu>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
arch/microblaze/include/asm/mmu.h | 104 ++++++++++++++++++++++++++++++++++++-
1 files changed, 102 insertions(+), 2 deletions(-)
diff --git a/arch/microblaze/include/asm/mmu.h b/arch/microblaze/include/asm/mmu.h
index 0e0431d..66cad6a 100644
--- a/arch/microblaze/include/asm/mmu.h
+++ b/arch/microblaze/include/asm/mmu.h
@@ -1,4 +1,6 @@
/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -9,11 +11,109 @@
#ifndef _ASM_MICROBLAZE_MMU_H
#define _ASM_MICROBLAZE_MMU_H
-#ifndef __ASSEMBLY__
+# ifndef CONFIG_MMU
+# ifndef __ASSEMBLY__
typedef struct {
struct vm_list_struct *vmlist;
unsigned long end_brk;
} mm_context_t;
-#endif /* __ASSEMBLY__ */
+# endif /* __ASSEMBLY__ */
+# else /* CONFIG_MMU */
+# ifdef __KERNEL__
+# ifndef __ASSEMBLY__
+/* Default "unsigned long" context */
+typedef unsigned long mm_context_t;
+
+/* Hardware Page Table Entry */
+typedef struct _PTE {
+ unsigned long v:1; /* Entry is valid */
+ unsigned long vsid:24; /* Virtual segment identifier */
+ unsigned long h:1; /* Hash algorithm indicator */
+ unsigned long api:6; /* Abbreviated page index */
+ unsigned long rpn:20; /* Real (physical) page number */
+ unsigned long :3; /* Unused */
+ unsigned long r:1; /* Referenced */
+ unsigned long c:1; /* Changed */
+ unsigned long w:1; /* Write-thru cache mode */
+ unsigned long i:1; /* Cache inhibited */
+ unsigned long m:1; /* Memory coherence */
+ unsigned long g:1; /* Guarded */
+ unsigned long :1; /* Unused */
+ unsigned long pp:2; /* Page protection */
+} PTE;
+
+/* Values for PP (assumes Ks=0, Kp=1) */
+# define PP_RWXX 0 /* Supervisor read/write, User none */
+# define PP_RWRX 1 /* Supervisor read/write, User read */
+# define PP_RWRW 2 /* Supervisor read/write, User read/write */
+# define PP_RXRX 3 /* Supervisor read, User read */
+
+/* Segment Register */
+typedef struct _SEGREG {
+ unsigned long t:1; /* Normal or I/O type */
+ unsigned long ks:1; /* Supervisor 'key' (normally 0) */
+ unsigned long kp:1; /* User 'key' (normally 1) */
+ unsigned long n:1; /* No-execute */
+ unsigned long :4; /* Unused */
+ unsigned long vsid:24; /* Virtual Segment Identifier */
+} SEGREG;
+
+extern void _tlbie(unsigned long va); /* invalidate a TLB entry */
+extern void _tlbia(void); /* invalidate all TLB entries */
+# endif /* __ASSEMBLY__ */
+
+/*
+ * The MicroBlaze processor has a TLB architecture identical to PPC-40x. The
+ * instruction and data sides share a unified, 64-entry, semi-associative
+ * TLB which is maintained totally under software control. In addition, the
+ * instruction side has a hardware-managed, 2,4, or 8-entry, fully-associative
+ * TLB which serves as a first level to the shared TLB. These two TLBs are
+ * known as the UTLB and ITLB, respectively.
+ */
+
+# define MICROBLAZE_TLB_SIZE 64
+
+/*
+ * TLB entries are defined by a "high" tag portion and a "low" data
+ * portion. The data portion is 32-bits.
+ *
+ * TLB entries are managed entirely under software control by reading,
+ * writing, and searching using the MTS and MFS instructions.
+ */
+
+# define TLB_LO 1
+# define TLB_HI 0
+# define TLB_DATA TLB_LO
+# define TLB_TAG TLB_HI
+
+/* Tag portion */
+# define TLB_EPN_MASK 0xFFFFFC00 /* Effective Page Number */
+# define TLB_PAGESZ_MASK 0x00000380
+# define TLB_PAGESZ(x) (((x) & 0x7) << 7)
+# define PAGESZ_1K 0
+# define PAGESZ_4K 1
+# define PAGESZ_16K 2
+# define PAGESZ_64K 3
+# define PAGESZ_256K 4
+# define PAGESZ_1M 5
+# define PAGESZ_4M 6
+# define PAGESZ_16M 7
+# define TLB_VALID 0x00000040 /* Entry is valid */
+
+/* Data portion */
+# define TLB_RPN_MASK 0xFFFFFC00 /* Real Page Number */
+# define TLB_PERM_MASK 0x00000300
+# define TLB_EX 0x00000200 /* Instruction execution allowed */
+# define TLB_WR 0x00000100 /* Writes permitted */
+# define TLB_ZSEL_MASK 0x000000F0
+# define TLB_ZSEL(x) (((x) & 0xF) << 4)
+# define TLB_ATTR_MASK 0x0000000F
+# define TLB_W 0x00000008 /* Caching is write-through */
+# define TLB_I 0x00000004 /* Caching is inhibited */
+# define TLB_M 0x00000002 /* Memory is coherent */
+# define TLB_G 0x00000001 /* Memory is guarded from prefetch */
+
+# endif /* __KERNEL__ */
+# endif /* CONFIG_MMU */
#endif /* _ASM_MICROBLAZE_MMU_H */
--
1.5.5.1
next prev parent reply other threads:[~2009-05-27 7:32 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-27 6:47 Microblaze MMU v2 Michal Simek
2009-05-27 6:47 ` [PATCH 01/29] microblaze_mmu_v2: Add mmu_defconfig Michal Simek
2009-05-27 6:47 ` [PATCH 02/29] microblaze_mmu_v2: MMU update for startup code Michal Simek
2009-05-27 6:47 ` [PATCH 03/29] microblaze_mmu_v2: Alocate TLB for early console Michal Simek
2009-05-27 6:47 ` [PATCH 04/29] microblaze_mmu_v2: TLB low level code Michal Simek
2009-05-27 6:47 ` [PATCH 05/29] microblaze_mmu_v2: MMU initialization Michal Simek
2009-05-27 6:47 ` Michal Simek [this message]
2009-05-27 6:47 ` [PATCH 07/29] microblaze_mmu_v2: Page fault handling high level - fault.c Michal Simek
2009-05-27 6:47 ` [PATCH 08/29] microblaze_mmu_v2: Context handling - mmu_context.c/h Michal Simek
2009-05-27 6:47 ` [PATCH 09/29] microblaze_mmu_v2: Page table - ioremap - pgtable.c/h, section update Michal Simek
2009-05-27 6:47 ` [PATCH 10/29] microblaze_mmu_v2: io.h MMU update Michal Simek
2009-05-27 6:47 ` [PATCH 11/29] microblaze_mmu_v2: pgalloc.h and page.h Michal Simek
2009-05-27 6:47 ` [PATCH 12/29] microblaze_mmu_v2: Update process creation for MMU Michal Simek
2009-05-27 6:47 ` [PATCH 13/29] microblaze_mmu_v2: Update tlb.h and tlbflush.h Michal Simek
2009-05-27 6:47 ` [PATCH 14/29] microblaze_mmu_v2: MMU asm offset update Michal Simek
2009-05-27 6:47 ` [PATCH 15/29] microblaze_mmu_v2: Add CURRENT_TASK for entry.S Michal Simek
2009-05-27 6:47 ` [PATCH 16/29] microblaze_mmu_v2: entry.S, entry.h Michal Simek
2009-05-27 6:47 ` [PATCH 17/29] microblaze_mmu_v2: Update exception handling - MMU exception Michal Simek
2009-05-27 6:47 ` [PATCH 18/29] microblaze_mmu_v2: uaccess MMU update Michal Simek
2009-05-27 6:47 ` [PATCH 19/29] microblaze_mmu_v2: Add MMU related exceptions handling Michal Simek
2009-05-27 6:47 ` [PATCH 20/29] microblaze_mmu_v2: Update linker script for MMU Michal Simek
2009-05-27 6:47 ` [PATCH 21/29] microblaze_mmu_v2: Enable fork syscall for MMU and add fork as vfork for noMMU Michal Simek
2009-05-27 6:47 ` [PATCH 22/29] microblaze_mmu_v2: Traps MMU update Michal Simek
2009-05-27 6:47 ` [PATCH 23/29] microblaze_mmu_v2: Update signal returning address Michal Simek
2009-05-27 6:47 ` [PATCH 24/29] microblaze_mmu_v2: Update cacheflush.h Michal Simek
2009-05-27 6:47 ` [PATCH 25/29] microblaze_mmu_v2: Update dma.h for MMU Michal Simek
2009-05-27 6:47 ` [PATCH 26/29] microblaze_mmu_v2: Elf update Michal Simek
2009-05-27 6:47 ` [PATCH 27/29] microblaze_mmu_v2: stat.h MMU update Michal Simek
2009-05-27 6:47 ` [PATCH 28/29] microblaze_mmu_v2: Kconfig update Michal Simek
2009-05-27 6:47 ` [PATCH 29/29] microblaze_mmu_v2: Makefiles Michal Simek
2009-05-27 11:08 ` [PATCH 08/29] microblaze_mmu_v2: Context handling - mmu_context.c/h Arnd Bergmann
2009-05-27 11:59 ` Michal Simek
2009-05-29 14:39 ` [microblaze-uclinux] Microblaze MMU v2 John Linn
2009-06-11 8:46 ` John Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1243406874-3917-7-git-send-email-monstr@monstr.eu \
--to=monstr@monstr.eu \
--cc=john.williams@petalogix.com \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@petalogix.com \
--cc=microblaze-uclinux@itee.uq.edu.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®