From: Jeremy Fitzhardinge <jeremy@goop.org>
To: Ingo Molnar <mingo@elte.hu>
Cc: the arch/x86 maintainers <x86@kernel.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Xen-devel <xen-devel@lists.xensource.com>,
Greg KH <gregkh@suse.de>, Jens Axboe <jens.axboe@oracle.com>,
Chris Wright <chrisw@redhat.com>,
kurt.hackel@oracle.com, Andrew Morton <akpm@linux-foundation.org>,
Ky Srinivasan <ksrinivasan@novell.com>,
Beulich <jbeulich@novell.com>,
Linus Torvalds <torvalds@linux-foundation.org>,
Stephen Tweedie <sct@redhat.com>,
Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Subject: [PATCH 04/16] xen dom0: Add support for the platform_ops hypercall
Date: Wed, 27 May 2009 00:15:26 -0700 [thread overview]
Message-ID: <1243408538-21100-5-git-send-email-jeremy@goop.org> (raw)
In-Reply-To: <1243408538-21100-1-git-send-email-jeremy@goop.org>
From: Stephen Tweedie <sct@redhat.com>
Minimal changes to get platform ops (renamed dom0_ops on pv_ops) working
on pv_ops builds. Pulls in upstream linux-2.6.18-xen.hg's platform.h
[ Impact: add Xen hypercall definitions ]
Signed-off-by: Stephen Tweedie <sct@redhat.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
arch/x86/include/asm/xen/hypercall.h | 8 ++
include/xen/interface/platform.h | 222 ++++++++++++++++++++++++++++++++++
include/xen/interface/xen.h | 2 +
3 files changed, 232 insertions(+), 0 deletions(-)
create mode 100644 include/xen/interface/platform.h
diff --git a/arch/x86/include/asm/xen/hypercall.h b/arch/x86/include/asm/xen/hypercall.h
index 9c371e4..6528f3b 100644
--- a/arch/x86/include/asm/xen/hypercall.h
+++ b/arch/x86/include/asm/xen/hypercall.h
@@ -45,6 +45,7 @@
#include <xen/interface/xen.h>
#include <xen/interface/sched.h>
#include <xen/interface/physdev.h>
+#include <xen/interface/platform.h>
/*
* The hypercall asms have to meet several constraints:
@@ -282,6 +283,13 @@ HYPERVISOR_set_timer_op(u64 timeout)
}
static inline int
+HYPERVISOR_dom0_op(struct xen_platform_op *platform_op)
+{
+ platform_op->interface_version = XENPF_INTERFACE_VERSION;
+ return _hypercall1(int, dom0_op, platform_op);
+}
+
+static inline int
HYPERVISOR_set_debugreg(int reg, unsigned long value)
{
return _hypercall2(int, set_debugreg, reg, value);
diff --git a/include/xen/interface/platform.h b/include/xen/interface/platform.h
new file mode 100644
index 0000000..83e4714
--- /dev/null
+++ b/include/xen/interface/platform.h
@@ -0,0 +1,222 @@
+/******************************************************************************
+ * platform.h
+ *
+ * Hardware platform operations. Intended for use by domain-0 kernel.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Copyright (c) 2002-2006, K Fraser
+ */
+
+#ifndef __XEN_PUBLIC_PLATFORM_H__
+#define __XEN_PUBLIC_PLATFORM_H__
+
+#include "xen.h"
+
+#define XENPF_INTERFACE_VERSION 0x03000001
+
+/*
+ * Set clock such that it would read <secs,nsecs> after 00:00:00 UTC,
+ * 1 January, 1970 if the current system time was <system_time>.
+ */
+#define XENPF_settime 17
+struct xenpf_settime {
+ /* IN variables. */
+ uint32_t secs;
+ uint32_t nsecs;
+ uint64_t system_time;
+};
+typedef struct xenpf_settime xenpf_settime_t;
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_settime_t);
+
+/*
+ * Request memory range (@mfn, @mfn+@nr_mfns-1) to have type @type.
+ * On x86, @type is an architecture-defined MTRR memory type.
+ * On success, returns the MTRR that was used (@reg) and a handle that can
+ * be passed to XENPF_DEL_MEMTYPE to accurately tear down the new setting.
+ * (x86-specific).
+ */
+#define XENPF_add_memtype 31
+struct xenpf_add_memtype {
+ /* IN variables. */
+ unsigned long mfn;
+ uint64_t nr_mfns;
+ uint32_t type;
+ /* OUT variables. */
+ uint32_t handle;
+ uint32_t reg;
+};
+typedef struct xenpf_add_memtype xenpf_add_memtype_t;
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_add_memtype_t);
+
+/*
+ * Tear down an existing memory-range type. If @handle is remembered then it
+ * should be passed in to accurately tear down the correct setting (in case
+ * of overlapping memory regions with differing types). If it is not known
+ * then @handle should be set to zero. In all cases @reg must be set.
+ * (x86-specific).
+ */
+#define XENPF_del_memtype 32
+struct xenpf_del_memtype {
+ /* IN variables. */
+ uint32_t handle;
+ uint32_t reg;
+};
+typedef struct xenpf_del_memtype xenpf_del_memtype_t;
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_del_memtype_t);
+
+/* Read current type of an MTRR (x86-specific). */
+#define XENPF_read_memtype 33
+struct xenpf_read_memtype {
+ /* IN variables. */
+ uint32_t reg;
+ /* OUT variables. */
+ unsigned long mfn;
+ uint64_t nr_mfns;
+ uint32_t type;
+};
+typedef struct xenpf_read_memtype xenpf_read_memtype_t;
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_read_memtype_t);
+
+#define XENPF_microcode_update 35
+struct xenpf_microcode_update {
+ /* IN variables. */
+ GUEST_HANDLE(void) data; /* Pointer to microcode data */
+ uint32_t length; /* Length of microcode data. */
+};
+typedef struct xenpf_microcode_update xenpf_microcode_update_t;
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_microcode_update_t);
+
+#define XENPF_platform_quirk 39
+#define QUIRK_NOIRQBALANCING 1 /* Do not restrict IO-APIC RTE targets */
+#define QUIRK_IOAPIC_BAD_REGSEL 2 /* IO-APIC REGSEL forgets its value */
+#define QUIRK_IOAPIC_GOOD_REGSEL 3 /* IO-APIC REGSEL behaves properly */
+struct xenpf_platform_quirk {
+ /* IN variables. */
+ uint32_t quirk_id;
+};
+typedef struct xenpf_platform_quirk xenpf_platform_quirk_t;
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_platform_quirk_t);
+
+#define XENPF_firmware_info 50
+#define XEN_FW_DISK_INFO 1 /* from int 13 AH=08/41/48 */
+#define XEN_FW_DISK_MBR_SIGNATURE 2 /* from MBR offset 0x1b8 */
+#define XEN_FW_VBEDDC_INFO 3 /* from int 10 AX=4f15 */
+struct xenpf_firmware_info {
+ /* IN variables. */
+ uint32_t type;
+ uint32_t index;
+ /* OUT variables. */
+ union {
+ struct {
+ /* Int13, Fn48: Check Extensions Present. */
+ uint8_t device; /* %dl: bios device number */
+ uint8_t version; /* %ah: major version */
+ uint16_t interface_support; /* %cx: support bitmap */
+ /* Int13, Fn08: Legacy Get Device Parameters. */
+ uint16_t legacy_max_cylinder; /* %cl[7:6]:%ch: max cyl # */
+ uint8_t legacy_max_head; /* %dh: max head # */
+ uint8_t legacy_sectors_per_track; /* %cl[5:0]: max sector # */
+ /* Int13, Fn41: Get Device Parameters (as filled into %ds:%esi). */
+ /* NB. First uint16_t of buffer must be set to buffer size. */
+ GUEST_HANDLE(void) edd_params;
+ } disk_info; /* XEN_FW_DISK_INFO */
+ struct {
+ uint8_t device; /* bios device number */
+ uint32_t mbr_signature; /* offset 0x1b8 in mbr */
+ } disk_mbr_signature; /* XEN_FW_DISK_MBR_SIGNATURE */
+ struct {
+ /* Int10, AX=4F15: Get EDID info. */
+ uint8_t capabilities;
+ uint8_t edid_transfer_time;
+ /* must refer to 128-byte buffer */
+ GUEST_HANDLE(uchar) edid;
+ } vbeddc_info; /* XEN_FW_VBEDDC_INFO */
+ } u;
+};
+typedef struct xenpf_firmware_info xenpf_firmware_info_t;
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_firmware_info_t);
+
+#define XENPF_enter_acpi_sleep 51
+struct xenpf_enter_acpi_sleep {
+ /* IN variables */
+ uint16_t pm1a_cnt_val; /* PM1a control value. */
+ uint16_t pm1b_cnt_val; /* PM1b control value. */
+ uint32_t sleep_state; /* Which state to enter (Sn). */
+ uint32_t flags; /* Must be zero. */
+};
+typedef struct xenpf_enter_acpi_sleep xenpf_enter_acpi_sleep_t;
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_enter_acpi_sleep_t);
+
+#define XENPF_change_freq 52
+struct xenpf_change_freq {
+ /* IN variables */
+ uint32_t flags; /* Must be zero. */
+ uint32_t cpu; /* Physical cpu. */
+ uint64_t freq; /* New frequency (Hz). */
+};
+typedef struct xenpf_change_freq xenpf_change_freq_t;
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_change_freq_t);
+
+/*
+ * Get idle times (nanoseconds since boot) for physical CPUs specified in the
+ * @cpumap_bitmap with range [0..@cpumap_nr_cpus-1]. The @idletime array is
+ * indexed by CPU number; only entries with the corresponding @cpumap_bitmap
+ * bit set are written to. On return, @cpumap_bitmap is modified so that any
+ * non-existent CPUs are cleared. Such CPUs have their @idletime array entry
+ * cleared.
+ */
+#define XENPF_getidletime 53
+struct xenpf_getidletime {
+ /* IN/OUT variables */
+ /* IN: CPUs to interrogate; OUT: subset of IN which are present */
+ GUEST_HANDLE(uchar) cpumap_bitmap;
+ /* IN variables */
+ /* Size of cpumap bitmap. */
+ uint32_t cpumap_nr_cpus;
+ /* Must be indexable for every cpu in cpumap_bitmap. */
+ GUEST_HANDLE(uint64_t) idletime;
+ /* OUT variables */
+ /* System time when the idletime snapshots were taken. */
+ uint64_t now;
+};
+typedef struct xenpf_getidletime xenpf_getidletime_t;
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_getidletime_t);
+
+struct xen_platform_op {
+ uint32_t cmd;
+ uint32_t interface_version; /* XENPF_INTERFACE_VERSION */
+ union {
+ struct xenpf_settime settime;
+ struct xenpf_add_memtype add_memtype;
+ struct xenpf_del_memtype del_memtype;
+ struct xenpf_read_memtype read_memtype;
+ struct xenpf_microcode_update microcode;
+ struct xenpf_platform_quirk platform_quirk;
+ struct xenpf_firmware_info firmware_info;
+ struct xenpf_enter_acpi_sleep enter_acpi_sleep;
+ struct xenpf_change_freq change_freq;
+ struct xenpf_getidletime getidletime;
+ uint8_t pad[128];
+ } u;
+};
+typedef struct xen_platform_op xen_platform_op_t;
+DEFINE_GUEST_HANDLE_STRUCT(xen_platform_op_t);
+
+#endif /* __XEN_PUBLIC_PLATFORM_H__ */
diff --git a/include/xen/interface/xen.h b/include/xen/interface/xen.h
index 2befa3e..18b5599 100644
--- a/include/xen/interface/xen.h
+++ b/include/xen/interface/xen.h
@@ -461,6 +461,8 @@ typedef uint8_t xen_domain_handle_t[16];
#define __mk_unsigned_long(x) x ## UL
#define mk_unsigned_long(x) __mk_unsigned_long(x)
+DEFINE_GUEST_HANDLE(uint64_t);
+
#else /* __ASSEMBLY__ */
/* In assembly code we cannot use C numeric constant suffixes. */
--
1.6.0.6
next prev parent reply other threads:[~2009-05-27 7:16 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-27 7:15 [GIT PULL REPOST] xen/dom0/core - core Xen dom0 support changes Jeremy Fitzhardinge
2009-05-27 7:15 ` [PATCH 01/16] xen dom0: Make hvc_xen console work for dom0 Jeremy Fitzhardinge
2009-05-27 7:15 ` [PATCH 02/16] xen dom0: Initialize xenbus " Jeremy Fitzhardinge
2009-05-27 7:15 ` [PATCH 03/16] xen dom0: Set up basic IO permissions " Jeremy Fitzhardinge
2009-05-27 7:15 ` Jeremy Fitzhardinge [this message]
2009-05-27 7:15 ` [PATCH 05/16] xen mtrr: Add mtrr_ops support for Xen mtrr Jeremy Fitzhardinge
2009-05-27 7:15 ` [PATCH 06/16] xen: disable PAT Jeremy Fitzhardinge
2009-05-27 7:15 ` [PATCH 07/16] xen/dom0: use _PAGE_IOMAP in ioremap to do machine mappings Jeremy Fitzhardinge
2009-05-27 7:15 ` [PATCH 08/16] xen/dom0: Use host E820 map Jeremy Fitzhardinge
2009-05-27 7:15 ` [PATCH 09/16] xen: implement XENMEM_machphys_mapping Jeremy Fitzhardinge
2009-05-27 7:15 ` [PATCH 10/16] xen: clear reserved bits in l3 entries given in the initial pagetables Jeremy Fitzhardinge
2009-05-27 7:15 ` [PATCH 11/16] xen: allow enable use of VGA console on dom0 Jeremy Fitzhardinge
2009-05-27 7:15 ` [PATCH 12/16] xen/dom0: add XEN_DOM0 config option Jeremy Fitzhardinge
2009-05-27 7:15 ` [PATCH 13/16] x86: make /dev/mem mappings _PAGE_IOMAP Jeremy Fitzhardinge
2009-05-27 7:15 ` [PATCH 14/16] paravirtualize IO permission bitmap Jeremy Fitzhardinge
2009-05-27 7:15 ` [PATCH 15/16] x86: don't need "changed" parameter for set_io_bitmap() Jeremy Fitzhardinge
2009-05-27 7:15 ` [PATCH 16/16] xen/i386: make sure initial VGA/ISA mappings are not overridden Jeremy Fitzhardinge
-- strict thread matches above, loose matches on Subject: below --
2009-05-12 21:28 [GIT PULL] xen dom0 core changes Jeremy Fitzhardinge
2009-05-12 21:28 ` [PATCH 04/16] xen dom0: Add support for the platform_ops hypercall Jeremy Fitzhardinge
2009-05-07 21:10 [GIT PULL] xen: core dom0 support Jeremy Fitzhardinge
2009-05-07 21:10 ` [PATCH 04/16] xen dom0: Add support for the platform_ops hypercall Jeremy Fitzhardinge
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1243408538-21100-5-git-send-email-jeremy@goop.org \
--to=jeremy@goop.org \
--cc=akpm@linux-foundation.org \
--cc=chrisw@redhat.com \
--cc=gregkh@suse.de \
--cc=jbeulich@novell.com \
--cc=jens.axboe@oracle.com \
--cc=jeremy.fitzhardinge@citrix.com \
--cc=ksrinivasan@novell.com \
--cc=kurt.hackel@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=sct@redhat.com \
--cc=torvalds@linux-foundation.org \
--cc=x86@kernel.org \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®