From: Robert Richter <robert.richter@amd.com>
To: Ingo Molnar <mingo@elte.hu>
Cc: LKML <linux-kernel@vger.kernel.org>,
oprofile-list <oprofile-list@lists.sourceforge.net>,
Robert Richter <robert.richter@amd.com>
Subject: [PATCH 15/23] x86/oprofile: replace macros to calculate control register
Date: Fri, 12 Jun 2009 14:35:32 +0200 [thread overview]
Message-ID: <1244810140-20595-16-git-send-email-robert.richter@amd.com> (raw)
In-Reply-To: <1244810140-20595-1-git-send-email-robert.richter@amd.com>
This patch introduces op_x86_get_ctrl() to calculate the value of the
performance control register. This is generic code usable for all
models. The event and reserved masks are model specific and stored in
struct op_x86_model_spec. 64 bit MSR functions are used now. The patch
removes many hard to read macros used for ctrl calculation.
The function op_x86_get_ctrl() is common code and the first step to
further merge performance counter implementations for x86 models.
Signed-off-by: Robert Richter <robert.richter@amd.com>
---
arch/x86/oprofile/nmi_int.c | 20 ++++++++++++++++++
arch/x86/oprofile/op_model_amd.c | 41 ++++++++++++++----------------------
arch/x86/oprofile/op_model_ppro.c | 29 +++++++++++--------------
arch/x86/oprofile/op_x86_model.h | 15 ++++++++++---
4 files changed, 60 insertions(+), 45 deletions(-)
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index c31f87b..388ee15 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -31,6 +31,26 @@ static DEFINE_PER_CPU(unsigned long, saved_lvtpc);
/* 0 == registered but off, 1 == registered and on */
static int nmi_enabled = 0;
+/* common functions */
+
+u64 op_x86_get_ctrl(struct op_x86_model_spec const *model,
+ struct op_counter_config *counter_config)
+{
+ u64 val = 0;
+ u16 event = (u16)counter_config->event;
+
+ val |= ARCH_PERFMON_EVENTSEL_INT;
+ val |= counter_config->user ? ARCH_PERFMON_EVENTSEL_USR : 0;
+ val |= counter_config->kernel ? ARCH_PERFMON_EVENTSEL_OS : 0;
+ val |= (counter_config->unit_mask & 0xFF) << 8;
+ event &= model->event_mask ? model->event_mask : 0xFF;
+ val |= event & 0xFF;
+ val |= (event & 0x0F00) << 24;
+
+ return val;
+}
+
+
static int profile_exceptions_notify(struct notifier_block *self,
unsigned long val, void *data)
{
diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 86e0a01..2406ab8 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -25,12 +25,11 @@
#define NUM_COUNTERS 4
#define NUM_CONTROLS 4
+#define OP_EVENT_MASK 0x0FFF
+
+#define MSR_AMD_EVENTSEL_RESERVED ((0xFFFFFCF0ULL<<32)|(1ULL<<21))
#define CTR_OVERFLOWED(n) (!((n) & (1U<<31)))
-#define CTRL_CLEAR_LO(x) (x &= (1<<21))
-#define CTRL_CLEAR_HI(x) (x &= 0xfffffcf0)
-#define CTRL_SET_EVENT_LOW(val, e) (val |= (e & 0xff))
-#define CTRL_SET_EVENT_HIGH(val, e) (val |= ((e >> 8) & 0xf))
static unsigned long reset_value[NUM_COUNTERS];
@@ -84,21 +83,19 @@ static void op_amd_fill_in_addresses(struct op_msrs * const msrs)
}
}
-
static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
struct op_msrs const * const msrs)
{
- unsigned int low, high;
+ u64 val;
int i;
/* clear all counters */
for (i = 0 ; i < NUM_CONTROLS; ++i) {
if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
continue;
- rdmsr(msrs->controls[i].addr, low, high);
- CTRL_CLEAR_LO(low);
- CTRL_CLEAR_HI(high);
- wrmsr(msrs->controls[i].addr, low, high);
+ rdmsrl(msrs->controls[i].addr, val);
+ val &= model->reserved;
+ wrmsrl(msrs->controls[i].addr, val);
}
/* avoid a false detection of ctr overflows in NMI handler */
@@ -112,19 +109,11 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
for (i = 0; i < NUM_COUNTERS; ++i) {
if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) {
reset_value[i] = counter_config[i].count;
-
wrmsr(msrs->counters[i].addr, -(unsigned int)counter_config[i].count, -1);
-
- rdmsr(msrs->controls[i].addr, low, high);
- CTRL_CLEAR_LO(low);
- CTRL_CLEAR_HI(high);
- CTRL_SET_ENABLE(low);
- CTRL_SET_USR(low, counter_config[i].user);
- CTRL_SET_KERN(low, counter_config[i].kernel);
- CTRL_SET_UM(low, counter_config[i].unit_mask);
- CTRL_SET_EVENT_LOW(low, counter_config[i].event);
- CTRL_SET_EVENT_HIGH(high, counter_config[i].event);
- wrmsr(msrs->controls[i].addr, low, high);
+ rdmsrl(msrs->controls[i].addr, val);
+ val &= model->reserved;
+ val |= op_x86_get_ctrl(model, &counter_config[i]);
+ wrmsrl(msrs->controls[i].addr, val);
} else {
reset_value[i] = 0;
}
@@ -486,14 +475,16 @@ static void op_amd_exit(void) {}
#endif /* CONFIG_OPROFILE_IBS */
struct op_x86_model_spec const op_amd_spec = {
- .init = op_amd_init,
- .exit = op_amd_exit,
.num_counters = NUM_COUNTERS,
.num_controls = NUM_CONTROLS,
+ .reserved = MSR_AMD_EVENTSEL_RESERVED,
+ .event_mask = OP_EVENT_MASK,
+ .init = op_amd_init,
+ .exit = op_amd_exit,
.fill_in_addresses = &op_amd_fill_in_addresses,
.setup_ctrs = &op_amd_setup_ctrs,
.check_ctrs = &op_amd_check_ctrs,
.start = &op_amd_start,
.stop = &op_amd_stop,
- .shutdown = &op_amd_shutdown
+ .shutdown = &op_amd_shutdown,
};
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 40b44ee..3092f99 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -10,6 +10,7 @@
* @author Philippe Elie
* @author Graydon Hoare
* @author Andi Kleen
+ * @author Robert Richter <robert.richter@amd.com>
*/
#include <linux/oprofile.h>
@@ -26,8 +27,8 @@ static int num_counters = 2;
static int counter_width = 32;
#define CTR_OVERFLOWED(n) (!((n) & (1ULL<<(counter_width-1))))
-#define CTRL_CLEAR(x) (x &= (1<<21))
-#define CTRL_SET_EVENT(val, e) (val |= e)
+
+#define MSR_PPRO_EVENTSEL_RESERVED ((0xFFFFFFFFULL<<32)|(1ULL<<21))
static u64 *reset_value;
@@ -54,7 +55,7 @@ static void ppro_fill_in_addresses(struct op_msrs * const msrs)
static void ppro_setup_ctrs(struct op_x86_model_spec const *model,
struct op_msrs const * const msrs)
{
- unsigned int low, high;
+ u64 val;
int i;
if (!reset_value) {
@@ -85,9 +86,9 @@ static void ppro_setup_ctrs(struct op_x86_model_spec const *model,
for (i = 0 ; i < num_counters; ++i) {
if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
continue;
- rdmsr(msrs->controls[i].addr, low, high);
- CTRL_CLEAR(low);
- wrmsr(msrs->controls[i].addr, low, high);
+ rdmsrl(msrs->controls[i].addr, val);
+ val &= model->reserved;
+ wrmsrl(msrs->controls[i].addr, val);
}
/* avoid a false detection of ctr overflows in NMI handler */
@@ -101,17 +102,11 @@ static void ppro_setup_ctrs(struct op_x86_model_spec const *model,
for (i = 0; i < num_counters; ++i) {
if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) {
reset_value[i] = counter_config[i].count;
-
wrmsrl(msrs->counters[i].addr, -reset_value[i]);
-
- rdmsr(msrs->controls[i].addr, low, high);
- CTRL_CLEAR(low);
- CTRL_SET_ENABLE(low);
- CTRL_SET_USR(low, counter_config[i].user);
- CTRL_SET_KERN(low, counter_config[i].kernel);
- CTRL_SET_UM(low, counter_config[i].unit_mask);
- CTRL_SET_EVENT(low, counter_config[i].event);
- wrmsr(msrs->controls[i].addr, low, high);
+ rdmsrl(msrs->controls[i].addr, val);
+ val &= model->reserved;
+ val |= op_x86_get_ctrl(model, &counter_config[i]);
+ wrmsrl(msrs->controls[i].addr, val);
} else {
reset_value[i] = 0;
}
@@ -205,6 +200,7 @@ static void ppro_shutdown(struct op_msrs const * const msrs)
struct op_x86_model_spec const op_ppro_spec = {
.num_counters = 2,
.num_controls = 2,
+ .reserved = MSR_PPRO_EVENTSEL_RESERVED,
.fill_in_addresses = &ppro_fill_in_addresses,
.setup_ctrs = &ppro_setup_ctrs,
.check_ctrs = &ppro_check_ctrs,
@@ -249,6 +245,7 @@ static int arch_perfmon_init(struct oprofile_operations *ignore)
}
struct op_x86_model_spec op_arch_perfmon_spec = {
+ .reserved = MSR_PPRO_EVENTSEL_RESERVED,
.init = &arch_perfmon_init,
/* num_counters/num_controls filled in at runtime */
.fill_in_addresses = &ppro_fill_in_addresses,
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index 6161c7f..3220d4c 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -6,21 +6,19 @@
* @remark Read the file COPYING
*
* @author Graydon Hoare
+ * @author Robert Richter <robert.richter@amd.com>
*/
#ifndef OP_X86_MODEL_H
#define OP_X86_MODEL_H
+#include <asm/types.h>
#include <asm/intel_arch_perfmon.h>
#define CTR_IS_RESERVED(msrs, c) ((msrs)->counters[(c)].addr ? 1 : 0)
#define CTRL_IS_RESERVED(msrs, c) ((msrs)->controls[(c)].addr ? 1 : 0)
#define CTRL_SET_ACTIVE(val) ((val) |= ARCH_PERFMON_EVENTSEL0_ENABLE)
-#define CTRL_SET_ENABLE(val) ((val) |= ARCH_PERFMON_EVENTSEL_INT)
#define CTRL_SET_INACTIVE(val) ((val) &= ~ARCH_PERFMON_EVENTSEL0_ENABLE)
-#define CTRL_SET_KERN(val, k) ((val) |= ((k) ? ARCH_PERFMON_EVENTSEL_OS : 0))
-#define CTRL_SET_USR(val, u) ((val) |= ((u) ? ARCH_PERFMON_EVENTSEL_USR : 0))
-#define CTRL_SET_UM(val, m) ((val) |= ((m) << 8))
struct op_saved_msr {
unsigned int high;
@@ -39,12 +37,16 @@ struct op_msrs {
struct pt_regs;
+struct oprofile_operations;
+
/* The model vtable abstracts the differences between
* various x86 CPU models' perfctr support.
*/
struct op_x86_model_spec {
unsigned int num_counters;
unsigned int num_controls;
+ u64 reserved;
+ u16 event_mask;
int (*init)(struct oprofile_operations *ops);
void (*exit)(void);
void (*fill_in_addresses)(struct op_msrs * const msrs);
@@ -57,6 +59,11 @@ struct op_x86_model_spec {
void (*shutdown)(struct op_msrs const * const msrs);
};
+struct op_counter_config;
+
+extern u64 op_x86_get_ctrl(struct op_x86_model_spec const *model,
+ struct op_counter_config *counter_config);
+
extern struct op_x86_model_spec const op_ppro_spec;
extern struct op_x86_model_spec const op_p4_spec;
extern struct op_x86_model_spec const op_p4_ht2_spec;
--
1.6.3.1
next prev parent reply other threads:[~2009-06-12 13:05 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-12 12:35 [PATCH 0/23] updates for oprofile Robert Richter
2009-06-12 12:35 ` [PATCH 01/23] Revert "oprofile: discover counters for op ppro too" Robert Richter
2009-06-12 12:35 ` [PATCH 02/23] x86/oprofile: moving arch_perfmon counter setup to op_x86_model_spec.init Robert Richter
2009-06-12 19:24 ` [PATCH] x86/oprofile: fix initialization of arch_perfmon for core_i7 Robert Richter
2009-06-12 12:35 ` [PATCH 03/23] x86/oprofile: minor style changes in struct op_x86_model_spec Robert Richter
2009-06-12 12:35 ` [PATCH 04/23] oprofile: remove irq_flags in struct op_entry Robert Richter
2009-06-12 12:35 ` [PATCH 05/23] oprofile: remove obselete include headers Robert Richter
2009-06-12 12:35 ` [PATCH 06/23] x86/oprofile: remove #ifdefs in ibs functions Robert Richter
2009-06-12 12:35 ` [PATCH 07/23] x86/oprofile: simplify AMD cpu init code Robert Richter
2009-06-12 12:35 ` [PATCH 08/23] x86/oprofile: move common macros to op_x86_model.h Robert Richter
2009-06-12 12:35 ` [PATCH 09/23] x86/oprofile: remove MSR macros for AMD cpus Robert Richter
2009-06-12 12:35 ` [PATCH 10/23] x86/oprofile: remove MSR macros for ppro cpus Robert Richter
2009-06-12 12:35 ` [PATCH 11/23] x86/oprofile: remove MSR macros for p4 cpus Robert Richter
2009-06-12 12:35 ` [PATCH 12/23] x86/oprofile: fix and cleanup CTRL_SET_* macros Robert Richter
2009-06-12 12:35 ` [PATCH 13/23] x86/oprofile: remove unused macros for AMD virtualization profiling Robert Richter
2009-06-12 12:35 ` [PATCH 14/23] x86/oprofile: pass the model to setup_ctrs() functions Robert Richter
2009-06-12 12:35 ` Robert Richter [this message]
2009-06-12 12:35 ` [PATCH 16/23] x86/oprofile: replace CTR_OVERFLOWED macros Robert Richter
2009-06-12 12:35 ` [PATCH 17/23] x86/oprofile: replace CTRL_SET_*ACTIVE macros Robert Richter
2009-06-12 12:35 ` [PATCH 18/23] x86/oprofile: replace CTR*_IS_RESERVED macros Robert Richter
2009-06-12 12:35 ` [PATCH 19/23] x86/oprofile: use 64 bit wrmsr functions Robert Richter
2009-06-22 7:49 ` Andi Kleen
2009-06-22 8:07 ` Andi Kleen
2009-06-12 12:35 ` [PATCH 20/23] x86/oprofile: use 64 bit values to save MSR states Robert Richter
2009-06-12 12:35 ` [PATCH 21/23] x86/oprofile: remove some local variables in MSR save/restore functions Robert Richter
2009-06-12 12:35 ` [PATCH 22/23] x86/oprofile: use 64 bit values in IBS functions Robert Richter
2009-06-12 12:35 ` [PATCH 23/23] x86/oprofile: introduce oprofile_add_data64() Robert Richter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1244810140-20595-16-git-send-email-robert.richter@amd.com \
--to=robert.richter@amd.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=oprofile-list@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome