Re: [PATCH v2 10/10] ARM: dts: suniv: add device tree for PopStick v1.1

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 12/10/2022 01:56, Icenowy Zheng wrote:
> PopStick is a minimal Allwinner F1C200s dongle, with its USB controller
> wired to a USB Type-A port, a SD slot and a SPI NAND flash on board, and
> an on-board CH340 USB-UART converted connected to F1C200s's UART0.


(...)

> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		led {
> +			function = LED_FUNCTION_STATUS;
> +			color = <LED_COLOR_ID_GREEN>;
> +			gpios = <&pio 4 6 GPIO_ACTIVE_HIGH>; /* PE6 */
> +			linux,default-trigger = "heartbeat";
> +		};
> +	};
> +
> +	reg_vcc3v3: vcc3v3 {

Generic node names, so at least generic "regulator" prefix or suffix.

> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc3v3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +};
> +
> +&mmc0 {
> +	cd-gpios = <&pio 4 3 GPIO_ACTIVE_LOW>; /* PE3 */
> +	bus-width = <4>;
> +	disable-wp;
> +	status = "okay";

Keep status as last property.

> +	vmmc-supply = <&reg_vcc3v3>;
> +};
> +
> +&spi0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&spi0_pc_pins>;
> +	status = "okay";
> +
> +	flash@0 {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		compatible = "spi-nand";
> +		reg = <0>;

compatible and reg are by convention the first properties.

> +		spi-max-frequency = <40000000>;
> +

Best regards,
Krzysztof