From: Robert Richter <robert.richter@amd.com>
To: Ingo Molnar <mingo@elte.hu>
Cc: LKML <linux-kernel@vger.kernel.org>,
oprofile-list <oprofile-list@lists.sourceforge.net>,
Robert Richter <robert.richter@amd.com>
Subject: [PATCH 16/26] x86/oprofile: Moving nmi_cpu_switch() in nmi_int.c
Date: Tue, 28 Jul 2009 19:07:16 +0200 [thread overview]
Message-ID: <1248800846-25422-17-git-send-email-robert.richter@amd.com> (raw)
In-Reply-To: <1248800846-25422-1-git-send-email-robert.richter@amd.com>
This patch moves some code in nmi_int.c to get a single separate
multiplexing code section.
Signed-off-by: Robert Richter <robert.richter@amd.com>
---
arch/x86/oprofile/nmi_int.c | 144 +++++++++++++++++++++----------------------
1 files changed, 70 insertions(+), 74 deletions(-)
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index f38c5cf..998c7dc 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -97,6 +97,29 @@ static void nmi_cpu_save_registers(struct op_msrs *msrs)
}
}
+static void nmi_cpu_start(void *dummy)
+{
+ struct op_msrs const *msrs = &__get_cpu_var(cpu_msrs);
+ model->start(msrs);
+}
+
+static int nmi_start(void)
+{
+ on_each_cpu(nmi_cpu_start, NULL, 1);
+ return 0;
+}
+
+static void nmi_cpu_stop(void *dummy)
+{
+ struct op_msrs const *msrs = &__get_cpu_var(cpu_msrs);
+ model->stop(msrs);
+}
+
+static void nmi_stop(void)
+{
+ on_each_cpu(nmi_cpu_stop, NULL, 1);
+}
+
#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
static DEFINE_PER_CPU(int, switch_index);
@@ -171,6 +194,53 @@ static void nmi_cpu_restore_mpx_registers(struct op_msrs *msrs)
}
}
+static void nmi_cpu_switch(void *dummy)
+{
+ int cpu = smp_processor_id();
+ int si = per_cpu(switch_index, cpu);
+ struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu);
+
+ nmi_cpu_stop(NULL);
+ nmi_cpu_save_mpx_registers(msrs);
+
+ /* move to next set */
+ si += model->num_counters;
+ if ((si > model->num_virt_counters) || (counter_config[si].count == 0))
+ per_cpu(switch_index, cpu) = 0;
+ else
+ per_cpu(switch_index, cpu) = si;
+
+ model->switch_ctrl(model, msrs);
+ nmi_cpu_restore_mpx_registers(msrs);
+
+ nmi_cpu_start(NULL);
+}
+
+
+/*
+ * Quick check to see if multiplexing is necessary.
+ * The check should be sufficient since counters are used
+ * in ordre.
+ */
+static int nmi_multiplex_on(void)
+{
+ return counter_config[model->num_counters].count ? 0 : -EINVAL;
+}
+
+static int nmi_switch_event(void)
+{
+ if (!model->switch_ctrl)
+ return -ENOSYS; /* not implemented */
+ if (nmi_multiplex_on() < 0)
+ return -EINVAL; /* not necessary */
+
+ on_each_cpu(nmi_cpu_switch, NULL, 1);
+
+ atomic_inc(&multiplex_counter);
+
+ return 0;
+}
+
#else
inline int op_x86_phys_to_virt(int phys) { return phys; }
@@ -325,29 +395,6 @@ static void nmi_shutdown(void)
put_cpu_var(cpu_msrs);
}
-static void nmi_cpu_start(void *dummy)
-{
- struct op_msrs const *msrs = &__get_cpu_var(cpu_msrs);
- model->start(msrs);
-}
-
-static int nmi_start(void)
-{
- on_each_cpu(nmi_cpu_start, NULL, 1);
- return 0;
-}
-
-static void nmi_cpu_stop(void *dummy)
-{
- struct op_msrs const *msrs = &__get_cpu_var(cpu_msrs);
- model->stop(msrs);
-}
-
-static void nmi_stop(void)
-{
- on_each_cpu(nmi_cpu_stop, NULL, 1);
-}
-
static int nmi_create_files(struct super_block *sb, struct dentry *root)
{
unsigned int i;
@@ -379,57 +426,6 @@ static int nmi_create_files(struct super_block *sb, struct dentry *root)
return 0;
}
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-
-static void nmi_cpu_switch(void *dummy)
-{
- int cpu = smp_processor_id();
- int si = per_cpu(switch_index, cpu);
- struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu);
-
- nmi_cpu_stop(NULL);
- nmi_cpu_save_mpx_registers(msrs);
-
- /* move to next set */
- si += model->num_counters;
- if ((si > model->num_virt_counters) || (counter_config[si].count == 0))
- per_cpu(switch_index, cpu) = 0;
- else
- per_cpu(switch_index, cpu) = si;
-
- model->switch_ctrl(model, msrs);
- nmi_cpu_restore_mpx_registers(msrs);
-
- nmi_cpu_start(NULL);
-}
-
-
-/*
- * Quick check to see if multiplexing is necessary.
- * The check should be sufficient since counters are used
- * in ordre.
- */
-static int nmi_multiplex_on(void)
-{
- return counter_config[model->num_counters].count ? 0 : -EINVAL;
-}
-
-static int nmi_switch_event(void)
-{
- if (!model->switch_ctrl)
- return -ENOSYS; /* not implemented */
- if (nmi_multiplex_on() < 0)
- return -EINVAL; /* not necessary */
-
- on_each_cpu(nmi_cpu_switch, NULL, 1);
-
- atomic_inc(&multiplex_counter);
-
- return 0;
-}
-
-#endif
-
#ifdef CONFIG_SMP
static int oprofile_cpu_notifier(struct notifier_block *b, unsigned long action,
void *data)
--
1.6.3.3
next prev parent reply other threads:[~2009-07-28 17:21 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-28 17:07 [PATCH 0/26] oprofile: Performance counter multiplexing Robert Richter
2009-07-28 17:07 ` [PATCH 01/26] x86/oprofile: Rework and simplify nmi_cpu_setup() Robert Richter
2009-07-28 17:07 ` [PATCH 02/26] x86/oprofile: Whitespaces changes only Robert Richter
2009-07-28 17:07 ` [PATCH 03/26] oprofile: Implement performance counter multiplexing Robert Richter
2009-07-28 17:07 ` [PATCH 04/26] x86/oprofile: Fix usage of NUM_CONTROLS/NUM_COUNTERS macros Robert Richter
2009-07-28 17:07 ` [PATCH 05/26] x86/oprofile: Use per_cpu() instead of __get_cpu_var() Robert Richter
2009-07-28 17:07 ` [PATCH 06/26] x86/oprofile: Fix initialization of switch_index Robert Richter
2009-07-28 17:07 ` [PATCH 07/26] oprofile: oprofile_set_timeout(), return with error for invalid args Robert Richter
2009-07-28 17:07 ` [PATCH 08/26] oprofile: Rename variable timeout_jiffies and move to oprofile_files.c Robert Richter
2009-07-28 17:07 ` [PATCH 09/26] oprofile: Remove oprofile_multiplexing_init() Robert Richter
2009-07-28 17:07 ` [PATCH 10/26] oprofile: Grouping multiplexing code in oprof.c Robert Richter
2009-07-28 17:07 ` [PATCH 11/26] oprofile: Introduce op_x86_phys_to_virt() Robert Richter
2009-07-28 17:07 ` [PATCH 12/26] oprofile: Grouping multiplexing code in op_model_amd.c Robert Richter
2009-07-28 17:07 ` [PATCH 13/26] x86/oprofile: Implement multiplexing setup/shutdown functions Robert Richter
2009-07-28 17:07 ` [PATCH 14/26] x86/oprofile: Moving nmi_setup_cpu_mux() in nmi_int.c Robert Richter
2009-07-28 17:07 ` [PATCH 15/26] x86/oprofile: Moving nmi_cpu_save/restore_mpx_registers() " Robert Richter
2009-07-28 17:07 ` Robert Richter [this message]
2009-07-28 17:07 ` [PATCH 17/26] x86/oprofile: Remove const qualifier from struct op_x86_model_spec Robert Richter
2009-07-28 17:07 ` [PATCH 18/26] x86/oprofile: Remove unused num_virt_controls " Robert Richter
2009-07-28 17:07 ` [PATCH 19/26] x86/oprofile: Modify initialization of num_virt_counters Robert Richter
2009-07-28 17:07 ` [PATCH 20/26] x86/oprofile: Add function has_mux() to check multiplexing support Robert Richter
2009-07-28 17:07 ` [PATCH 21/26] x86/oprofile: Enable multiplexing only if the model supports it Robert Richter
2009-07-28 17:07 ` [PATCH 22/26] x86/oprofile: Implement mux_clone() Robert Richter
2009-07-28 17:07 ` [PATCH 23/26] oprofile: Adding switch counter to oprofile statistic variables Robert Richter
2009-07-28 17:07 ` [PATCH 24/26] x86/oprofile: Implement op_x86_virt_to_phys() Robert Richter
2009-07-28 17:07 ` [PATCH 25/26] x86/oprofile: Add counter reservation check for virtual counters Robert Richter
2009-07-28 17:07 ` [PATCH 26/26] x86/oprofile: Small coding style fixes Robert Richter
2009-07-28 18:45 ` [PATCH 0/26] oprofile: Performance counter multiplexing Andi Kleen
2009-07-28 22:18 ` Suthikulpanit, Suravee
2009-08-03 11:22 ` Ingo Molnar
2009-08-03 14:25 ` Arjan van de Ven
2009-08-04 20:11 ` Ingo Molnar
2009-08-05 12:35 ` Robert Richter
2009-08-06 7:31 ` Pekka Enberg
2009-08-06 10:51 ` Ingo Molnar
2009-08-13 16:13 ` Robert Richter
[not found] ` <20090806105134.GD11236__37984.4768475325$1249556453$gmane$org@elte.hu>
2010-02-26 14:51 ` Andi Kleen
2010-03-05 16:46 ` Robert Richter
2010-03-05 17:01 ` Steven Rostedt
2010-03-08 3:51 ` Andi Kleen
2009-08-03 16:30 ` Robert Richter
2009-08-04 17:05 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1248800846-25422-17-git-send-email-robert.richter@amd.com \
--to=robert.richter@amd.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=oprofile-list@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome