mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jens Axboe <jens.axboe@oracle.com>
To: linux-kernel@vger.kernel.org, linux-fsdevel@vger.kernel.org
Cc: chris.mason@oracle.com, david@fromorbit.com, hch@infradead.org,
	tytso@mit.edu, akpm@linux-foundation.org, jack@suse.cz,
	Jens Axboe <jens.axboe@oracle.com>
Subject: [PATCH 8/8] vm: Add an tuning knob for vm.max_writeback_pages
Date: Wed,  2 Sep 2009 10:42:47 +0200	[thread overview]
Message-ID: <1251880967-1136-9-git-send-email-jens.axboe@oracle.com> (raw)
In-Reply-To: <1251880967-1136-1-git-send-email-jens.axboe@oracle.com>

From: Theodore Ts'o <tytso@mit.edu>

Originally, MAX_WRITEBACK_PAGES was hard-coded to 1024 because of a
concern of not holding I_SYNC for too long.  (At least, that was the
comment previously.)  This doesn't make sense now because the only
time we wait for I_SYNC is if we are calling sync or fsync, and in
that case we need to write out all of the data anyway.  Previously
there may have been other code paths that waited on I_SYNC, but not
any more.

According to Christoph, the current writeback size is way too small,
and XFS had a hack that bumped out nr_to_write to four times the value
sent by the VM to be able to saturate medium-sized RAID arrays.  This
value was also problematic for ext4 as well, as it caused large files
to be come interleaved on disk by in 8 megabyte chunks (we bumped up
the nr_to_write by a factor of two).

So, in this patch, we make the MAX_WRITEBACK_PAGES a tunable, and
change the default to be 32768 blocks.

http://bugzilla.kernel.org/show_bug.cgi?id=13930

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 fs/fs-writeback.c         |   15 +++------------
 include/linux/writeback.h |    1 +
 kernel/sysctl.c           |    8 ++++++++
 mm/page-writeback.c       |    6 ++++++
 4 files changed, 18 insertions(+), 12 deletions(-)

diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index ea97a82..3bb4d2c 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -641,15 +641,6 @@ void sync_inodes_wbc(struct writeback_control *wbc)
 	sync_inodes_wb(&bdi->wb, wbc);
 }
 
-/*
- * The maximum number of pages to writeout in a single bdi flush/kupdate
- * operation.  We do this so we don't hold I_SYNC against an inode for
- * enormous amounts of time, which would block a userspace task which has
- * been forced to throttle against that inode.  Also, the code reevaluates
- * the dirty each time it has written this many pages.
- */
-#define MAX_WRITEBACK_PAGES     1024
-
 static inline bool over_bground_thresh(void)
 {
 	unsigned long background_thresh, dirty_thresh;
@@ -703,11 +694,11 @@ static long wb_writeback(struct bdi_writeback *wb, long nr_pages,
 
 		wbc.more_io = 0;
 		wbc.encountered_congestion = 0;
-		wbc.nr_to_write = MAX_WRITEBACK_PAGES;
+		wbc.nr_to_write = max_writeback_pages;
 		wbc.pages_skipped = 0;
 		sync_inodes_wb(wb, &wbc);
-		nr_pages -= MAX_WRITEBACK_PAGES - wbc.nr_to_write;
-		wrote += MAX_WRITEBACK_PAGES - wbc.nr_to_write;
+		nr_pages -= max_writeback_pages - wbc.nr_to_write;
+		wrote += max_writeback_pages - wbc.nr_to_write;
 
 		/*
 		 * If we ran out of stuff to write, bail unless more_io got set
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index 57d2d1c..b8d15b4 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -105,6 +105,7 @@ extern int vm_dirty_ratio;
 extern unsigned long vm_dirty_bytes;
 extern unsigned int dirty_writeback_interval;
 extern unsigned int dirty_expire_interval;
+extern unsigned int max_writeback_pages;
 extern int vm_highmem_is_dirtyable;
 extern int block_dump;
 extern int laptop_mode;
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 58be760..06d1c4c 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -1104,6 +1104,14 @@ static struct ctl_table vm_table[] = {
 		.proc_handler	= &proc_dointvec,
 	},
 	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "max_writeback_pages",
+		.data		= &max_writeback_pages,
+		.maxlen		= sizeof(max_writeback_pages),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec,
+	},
+	{
 		.ctl_name	= VM_NR_PDFLUSH_THREADS,
 		.procname	= "nr_pdflush_threads",
 		.data		= &nr_pdflush_threads,
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index a0077cb..6ca4790 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -55,6 +55,12 @@ static inline long sync_writeback_pages(void)
 /* The following parameters are exported via /proc/sys/vm */
 
 /*
+ * The maximum number of pages to write out in a single bdflush/kupdate
+ * operation.
+ */
+unsigned int max_writeback_pages = 32768;
+
+/*
  * Start background writeback (via pdflush) at this percentage
  */
 int dirty_background_ratio = 10;
-- 
1.6.4.1.207.g68ea


  parent reply	other threads:[~2009-09-02  8:43 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-09-02  8:42 [PATCH 0/8] Per-bdi writeback flusher threads v17 Jens Axboe
2009-09-02  8:42 ` [PATCH 1/8] writeback: get rid of generic_sync_sb_inodes() export Jens Axboe
2009-09-02 10:13   ` Jan Kara
2009-09-02 10:26     ` Jens Axboe
2009-09-02 14:01       ` Jan Kara
2009-09-02  8:42 ` [PATCH 2/8] writeback: move dirty inodes from super_block to backing_dev_info Jens Axboe
2009-09-04  2:46   ` Christoph Hellwig
2009-09-04  2:50     ` Christoph Hellwig
2009-09-04  7:19       ` Jens Axboe
2009-09-04  2:56   ` Christoph Hellwig
2009-09-04  6:53     ` Jens Axboe
2009-09-04 15:43       ` Christoph Hellwig
2009-09-06 18:43         ` Jens Axboe
2009-09-08 18:44           ` Christoph Hellwig
2009-09-11  7:47             ` Jens Axboe
2009-09-02  8:42 ` [PATCH 3/8] writeback: switch to per-bdi threads for flushing data Jens Axboe
2009-09-02  8:42 ` [PATCH 4/8] writeback: get rid of pdflush completely Jens Axboe
2009-09-02  8:42 ` [PATCH 5/8] writeback: add some debug inode list counters to bdi stats Jens Axboe
2009-09-02  8:42 ` [PATCH 6/8] writeback: add name to backing_dev_info Jens Axboe
2009-09-02  8:42 ` [PATCH 7/8] writeback: check for registered bdi in flusher add and inode dirty Jens Axboe
2009-09-02  8:42 ` Jens Axboe [this message]
  -- strict thread matches above, loose matches on Subject: below --
2009-09-01 11:18 [PATCH 0/8] Per-bdi writeback flusher threads v16 Jens Axboe
2009-09-01 11:19 ` [PATCH 8/8] vm: Add an tuning knob for vm.max_writeback_pages Jens Axboe
2009-09-01 18:38   ` Peter Zijlstra
2009-09-01 18:44     ` Christoph Hellwig
2009-09-01 20:27       ` Theodore Tso
2009-09-02  7:32         ` Peter Zijlstra
2009-09-02  7:35           ` Peter Zijlstra
2009-09-01 23:52       ` Jamie Lokier
2009-09-01 23:56         ` Jamie Lokier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1251880967-1136-9-git-send-email-jens.axboe@oracle.com \
    --to=jens.axboe@oracle.com \
    --cc=akpm@linux-foundation.org \
    --cc=chris.mason@oracle.com \
    --cc=david@fromorbit.com \
    --cc=hch@infradead.org \
    --cc=jack@suse.cz \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tytso@mit.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®