From: Tim Abbott <tabbott@ksplice.com>
To: linux-ia64@vger.kernel.org
Cc: Tony Luck <tony.luck@intel.com>,
Fenghua Yu <fenghua.yu@intel.com>,
linux-kernel@vger.kernel.org, Sam Ravnborg <sam@ravnborg.org>,
Nelson Elhage <nelhage@ksplice.com>
Subject: [PATCH v2 3/3] ia64: Clean up linker script using standard macros.
Date: Wed, 16 Sep 2009 12:42:44 -0400 [thread overview]
Message-ID: <1253119364-19359-4-git-send-email-tabbott@ksplice.com> (raw)
In-Reply-To: <1253119364-19359-1-git-send-email-tabbott@ksplice.com>
From: Nelson Elhage <nelhage@ksplice.com>
Aside from using fewer output sections and moving some data around,
the main side effect of this change is changing the alignment of some
sections. In particular:
* cachline-aligned and read_mostly data are now aligned to
SMP_CACHE_BYTES. (Previously, they were laid out consecutively after
a PAGE_SIZE alignment)
* .init.ramfs is now page-aligned, per the INIT_RAM_FS
macro. (Previously it had no explicit alignment).
Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-ia64@vger.kernel.org
---
arch/ia64/kernel/vmlinux.lds.S | 106 ++++------------------------------------
1 files changed, 10 insertions(+), 96 deletions(-)
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index 7976719..f289927 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -64,14 +64,7 @@ SECTIONS
NOTES :code :note /* put .notes in text and mark in PT_NOTE */
code_continues : {} :code /* switch back to regular program... */
- /* Exception table */
- . = ALIGN(16);
- __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET)
- {
- __start___ex_table = .;
- *(__ex_table)
- __stop___ex_table = .;
- }
+ EXCEPTION_TABLE(16)
/* MCA table */
. = ALIGN(16);
@@ -113,38 +106,9 @@ SECTIONS
. = ALIGN(PAGE_SIZE);
__init_begin = .;
- .init.text : AT(ADDR(.init.text) - LOAD_OFFSET)
- {
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- }
- .init.data : AT(ADDR(.init.data) - LOAD_OFFSET)
- { INIT_DATA }
-
-#ifdef CONFIG_BLK_DEV_INITRD
- .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET)
- {
- __initramfs_start = .;
- *(.init.ramfs)
- __initramfs_end = .;
- }
-#endif
-
- . = ALIGN(16);
- .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET)
- {
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
- }
- .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET)
- {
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
- }
+ INIT_TEXT_SECTION(PAGE_SIZE)
+ INIT_DATA_SECTION(16)
.data.patch.vtop : AT(ADDR(.data.patch.vtop) - LOAD_OFFSET)
{
@@ -202,22 +166,9 @@ SECTIONS
}
#endif
- . = ALIGN(8);
- __con_initcall_start = .;
- .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET)
- { *(.con_initcall.init) }
- __con_initcall_end = .;
- __security_initcall_start = .;
- .security_initcall.init : AT(ADDR(.security_initcall.init) - LOAD_OFFSET)
- { *(.security_initcall.init) }
- __security_initcall_end = .;
. = ALIGN(PAGE_SIZE);
__init_end = .;
- /* The initial task and kernel stack */
- .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET)
- { *(.data.init_task) }
-
.data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET)
{
PAGE_ALIGNED_DATA(PAGE_SIZE)
@@ -236,12 +187,6 @@ SECTIONS
* kernel data
*/
- .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET)
- { *(.data.read_mostly) }
-
- .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET)
- { *(.data.cacheline_aligned) }
-
/* Per-cpu data: */
. = ALIGN(PERCPU_PAGE_SIZE);
PERCPU_VADDR(PERCPU_ADDR, :percpu)
@@ -258,6 +203,9 @@ SECTIONS
__cpu0_per_cpu = .;
. = . + PERCPU_PAGE_SIZE; /* cpu0 per-cpu space */
#endif
+ INIT_TASK_DATA(PAGE_SIZE)
+ CACHELINE_ALIGNED_DATA(SMP_CACHE_BYTES)
+ READ_MOSTLY_DATA(SMP_CACHE_BYTES)
DATA_DATA
*(.data1)
*(.gnu.linkonce.d*)
@@ -274,49 +222,15 @@ SECTIONS
.sdata : AT(ADDR(.sdata) - LOAD_OFFSET)
{ *(.sdata) *(.sdata1) *(.srdata) }
_edata = .;
- __bss_start = .;
- .sbss : AT(ADDR(.sbss) - LOAD_OFFSET)
- { *(.sbss) *(.scommon) }
- .bss : AT(ADDR(.bss) - LOAD_OFFSET)
- { *(.bss) *(COMMON) }
- __bss_stop = .;
+
+ BSS_SECTION(0, 0, 0)
_end = .;
code : { } :code
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
- /* DWARF debug sections.
- Symbols in the DWARF debugging sections are relative to the beginning
- of the section so we begin them at 0. */
- /* DWARF 1 */
- .debug 0 : { *(.debug) }
- .line 0 : { *(.line) }
- /* GNU DWARF 1 extensions */
- .debug_srcinfo 0 : { *(.debug_srcinfo) }
- .debug_sfnames 0 : { *(.debug_sfnames) }
- /* DWARF 1.1 and DWARF 2 */
- .debug_aranges 0 : { *(.debug_aranges) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
- /* DWARF 2 */
- .debug_info 0 : { *(.debug_info) }
- .debug_abbrev 0 : { *(.debug_abbrev) }
- .debug_line 0 : { *(.debug_line) }
- .debug_frame 0 : { *(.debug_frame) }
- .debug_str 0 : { *(.debug_str) }
- .debug_loc 0 : { *(.debug_loc) }
- .debug_macinfo 0 : { *(.debug_macinfo) }
- /* SGI/MIPS DWARF 2 extensions */
- .debug_weaknames 0 : { *(.debug_weaknames) }
- .debug_funcnames 0 : { *(.debug_funcnames) }
- .debug_typenames 0 : { *(.debug_typenames) }
- .debug_varnames 0 : { *(.debug_varnames) }
+ STABS_DEBUG
+ DWARF_DEBUG
/* Default discards */
DISCARDS
}
--
1.6.3.3
prev parent reply other threads:[~2009-09-16 16:43 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-16 16:42 [PATCH v2 0/3] Linker script cleanup patches for ia64 Tim Abbott
2009-09-16 16:42 ` [PATCH v2 1/3] ia64: Use .ref.text, not .text.init for start_ap Tim Abbott
2009-09-16 16:42 ` [PATCH v2 2/3] ia64: Use standard macros for page-aligned data Tim Abbott
2009-09-16 16:42 ` Tim Abbott [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1253119364-19359-4-git-send-email-tabbott@ksplice.com \
--to=tabbott@ksplice.com \
--cc=fenghua.yu@intel.com \
--cc=linux-ia64@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nelhage@ksplice.com \
--cc=sam@ravnborg.org \
--cc=tony.luck@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®