From: Wolfram Sang <w.sang@pengutronix.de>
To: linux-kernel@vger.kernel.org
Cc: Liam Girdwood <lrg@slimlogic.co.uk>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Wolfram Sang <w.sang@pengutronix.de>
Subject: [PATCH 1/4] regulator: fix typos
Date: Fri, 18 Sep 2009 22:44:43 +0200 [thread overview]
Message-ID: <1253306686-20616-2-git-send-email-w.sang@pengutronix.de> (raw)
In-Reply-To: <1253306686-20616-1-git-send-email-w.sang@pengutronix.de>
Fix a couple of typos I found while working with this subsystem.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
---
Documentation/power/regulator/machine.txt | 4 ++--
include/linux/regulator/machine.h | 6 +++---
include/linux/regulator/max1586.h | 4 ++--
3 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/Documentation/power/regulator/machine.txt b/Documentation/power/regulator/machine.txt
index ce3487d..63728fe 100644
--- a/Documentation/power/regulator/machine.txt
+++ b/Documentation/power/regulator/machine.txt
@@ -87,7 +87,7 @@ static struct platform_device regulator_devices[] = {
},
};
/* register regulator 1 device */
-platform_device_register(&wm8350_regulator_devices[0]);
+platform_device_register(®ulator_devices[0]);
/* register regulator 2 device */
-platform_device_register(&wm8350_regulator_devices[1]);
+platform_device_register(®ulator_devices[1]);
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
index bac64fa..91aceae 100644
--- a/include/linux/regulator/machine.h
+++ b/include/linux/regulator/machine.h
@@ -41,7 +41,7 @@ struct regulator;
#define REGULATOR_CHANGE_DRMS 0x10
/**
- * struct regulator_state - regulator state during low power syatem states
+ * struct regulator_state - regulator state during low power system states
*
* This describes a regulators state during a system wide low power state.
*
@@ -117,10 +117,10 @@ struct regulation_constraints {
/* mode to set on startup */
unsigned int initial_mode;
- /* constriant flags */
+ /* constraint flags */
unsigned always_on:1; /* regulator never off when system is on */
unsigned boot_on:1; /* bootloader/firmware enabled regulator */
- unsigned apply_uV:1; /* apply uV constraint iff min == max */
+ unsigned apply_uV:1; /* apply uV constraint if min == max */
};
/**
diff --git a/include/linux/regulator/max1586.h b/include/linux/regulator/max1586.h
index 4456319..de9a7fa 100644
--- a/include/linux/regulator/max1586.h
+++ b/include/linux/regulator/max1586.h
@@ -36,7 +36,7 @@
* max1586_subdev_data - regulator data
* @id: regulator Id (either MAX1586_V3 or MAX1586_V6)
* @name: regulator cute name (example for V3: "vcc_core")
- * @platform_data: regulator init data (contraints, supplies, ...)
+ * @platform_data: regulator init data (constraints, supplies, ...)
*/
struct max1586_subdev_data {
int id;
@@ -46,7 +46,7 @@ struct max1586_subdev_data {
/**
* max1586_platform_data - platform data for max1586
- * @num_subdevs: number of regultors used (may be 1 or 2)
+ * @num_subdevs: number of regulators used (may be 1 or 2)
* @subdevs: regulator used
* At most, there will be a regulator for V3 and one for V6 voltages.
* @v3_gain: gain on the V3 voltage output multiplied by 1e6.
--
1.6.3.3
next prev parent reply other threads:[~2009-09-18 20:45 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-18 20:44 Lightweight patchset for regulator-framework Wolfram Sang
2009-09-18 20:44 ` Wolfram Sang [this message]
2009-09-18 20:44 ` [PATCH 2/4] regulator: drop 'default n' Wolfram Sang
2009-09-18 20:44 ` [PATCH 3/4] regulator/lp3971: drop unnecessary initialization Wolfram Sang
2009-09-18 20:44 ` [PATCH 4/4] regulator/driver: be more specific in nanodoc for is_enabled Wolfram Sang
2009-09-18 21:14 ` Lightweight patchset for regulator-framework Mark Brown
2009-09-19 10:33 ` Liam Girdwood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1253306686-20616-2-git-send-email-w.sang@pengutronix.de \
--to=w.sang@pengutronix.de \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@slimlogic.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®