From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Samuel Ortiz <sameo@linux.intel.com>
Cc: linux-kernel@vger.kernel.org,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 4/4] mfd: Add support for WM8320 PMICs
Date: Thu, 1 Oct 2009 15:41:07 +0100 [thread overview]
Message-ID: <1254408067-15908-4-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1254408067-15908-3-git-send-email-broonie@opensource.wolfsonmicro.com>
The WM8320 is an integrated power management subsystem providing
voltage regulators, RTC, watchdog and other functionality. The
WM8320 is derived from the WM831x and therefore shares most of
the driver code with the WM831x.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/Kconfig | 6 +-
drivers/mfd/wm831x-core.c | 159 +++++++++++++++++++++++++++++++++++++++
include/linux/mfd/wm831x/core.h | 1 +
3 files changed, 163 insertions(+), 3 deletions(-)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 570be13..f88cce4 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -171,12 +171,12 @@ config MFD_WM8400
the functionality of the device.
config MFD_WM831X
- tristate "Support Wolfson Microelectronics WM831x PMICs"
+ tristate "Support Wolfson Microelectronics WM831x/2x PMICs"
select MFD_CORE
depends on I2C
help
- Support for the Wolfson Microelecronics WM831x PMICs. This
- driver provides common support for accessing the device,
+ Support for the Wolfson Microelecronics WM831x and WM832x PMICs.
+ This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the
functionality of the device.
diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c
index 45d6770..015df29 100644
--- a/drivers/mfd/wm831x-core.c
+++ b/drivers/mfd/wm831x-core.c
@@ -93,6 +93,7 @@ enum wm831x_parent {
WM8310 = 0x8310,
WM8311 = 0x8311,
WM8312 = 0x8312,
+ WM8320 = 0x8320,
};
static int wm831x_reg_locked(struct wm831x *wm831x, unsigned short reg)
@@ -478,6 +479,20 @@ static struct resource wm831x_dcdc4_resources[] = {
},
};
+static struct resource wm8320_dcdc4_buck_resources[] = {
+ {
+ .start = WM831X_DC4_CONTROL,
+ .end = WM832X_DC4_SLEEP_CONTROL,
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .name = "UV",
+ .start = WM831X_IRQ_UV_DC4,
+ .end = WM831X_IRQ_UV_DC4,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
static struct resource wm831x_gpio_resources[] = {
{
.start = WM831X_IRQ_GPIO_1,
@@ -1246,6 +1261,137 @@ static struct mfd_cell wm8312_devs[] = {
},
};
+static struct mfd_cell wm8320_devs[] = {
+ {
+ .name = "wm831x-backup",
+ },
+ {
+ .name = "wm831x-buckv",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(wm831x_dcdc1_resources),
+ .resources = wm831x_dcdc1_resources,
+ },
+ {
+ .name = "wm831x-buckv",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(wm831x_dcdc2_resources),
+ .resources = wm831x_dcdc2_resources,
+ },
+ {
+ .name = "wm831x-buckp",
+ .id = 3,
+ .num_resources = ARRAY_SIZE(wm831x_dcdc3_resources),
+ .resources = wm831x_dcdc3_resources,
+ },
+ {
+ .name = "wm831x-buckp",
+ .id = 4,
+ .num_resources = ARRAY_SIZE(wm8320_dcdc4_buck_resources),
+ .resources = wm8320_dcdc4_buck_resources,
+ },
+ {
+ .name = "wm831x-gpio",
+ .num_resources = ARRAY_SIZE(wm831x_gpio_resources),
+ .resources = wm831x_gpio_resources,
+ },
+ {
+ .name = "wm831x-hwmon",
+ },
+ {
+ .name = "wm831x-ldo",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(wm831x_ldo1_resources),
+ .resources = wm831x_ldo1_resources,
+ },
+ {
+ .name = "wm831x-ldo",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(wm831x_ldo2_resources),
+ .resources = wm831x_ldo2_resources,
+ },
+ {
+ .name = "wm831x-ldo",
+ .id = 3,
+ .num_resources = ARRAY_SIZE(wm831x_ldo3_resources),
+ .resources = wm831x_ldo3_resources,
+ },
+ {
+ .name = "wm831x-ldo",
+ .id = 4,
+ .num_resources = ARRAY_SIZE(wm831x_ldo4_resources),
+ .resources = wm831x_ldo4_resources,
+ },
+ {
+ .name = "wm831x-ldo",
+ .id = 5,
+ .num_resources = ARRAY_SIZE(wm831x_ldo5_resources),
+ .resources = wm831x_ldo5_resources,
+ },
+ {
+ .name = "wm831x-ldo",
+ .id = 6,
+ .num_resources = ARRAY_SIZE(wm831x_ldo6_resources),
+ .resources = wm831x_ldo6_resources,
+ },
+ {
+ .name = "wm831x-aldo",
+ .id = 7,
+ .num_resources = ARRAY_SIZE(wm831x_ldo7_resources),
+ .resources = wm831x_ldo7_resources,
+ },
+ {
+ .name = "wm831x-aldo",
+ .id = 8,
+ .num_resources = ARRAY_SIZE(wm831x_ldo8_resources),
+ .resources = wm831x_ldo8_resources,
+ },
+ {
+ .name = "wm831x-aldo",
+ .id = 9,
+ .num_resources = ARRAY_SIZE(wm831x_ldo9_resources),
+ .resources = wm831x_ldo9_resources,
+ },
+ {
+ .name = "wm831x-aldo",
+ .id = 10,
+ .num_resources = ARRAY_SIZE(wm831x_ldo10_resources),
+ .resources = wm831x_ldo10_resources,
+ },
+ {
+ .name = "wm831x-alive-ldo",
+ .id = 11,
+ .num_resources = ARRAY_SIZE(wm831x_ldo11_resources),
+ .resources = wm831x_ldo11_resources,
+ },
+ {
+ .name = "wm831x-on",
+ .num_resources = ARRAY_SIZE(wm831x_on_resources),
+ .resources = wm831x_on_resources,
+ },
+ {
+ .name = "wm831x-rtc",
+ .num_resources = ARRAY_SIZE(wm831x_rtc_resources),
+ .resources = wm831x_rtc_resources,
+ },
+ {
+ .name = "wm831x-status",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(wm831x_status1_resources),
+ .resources = wm831x_status1_resources,
+ },
+ {
+ .name = "wm831x-status",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(wm831x_status2_resources),
+ .resources = wm831x_status2_resources,
+ },
+ {
+ .name = "wm831x-watchdog",
+ .num_resources = ARRAY_SIZE(wm831x_wdt_resources),
+ .resources = wm831x_wdt_resources,
+ },
+};
+
static struct mfd_cell backlight_devs[] = {
{
.name = "wm831x-backlight",
@@ -1318,6 +1464,12 @@ static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
dev_info(wm831x->dev, "WM8312 revision %c\n", 'A' + rev);
break;
+ case WM8320:
+ parent = WM8320;
+ wm831x->num_gpio = 12;
+ dev_info(wm831x->dev, "WM8320 revision %c\n", 'A' + rev);
+ break;
+
default:
dev_err(wm831x->dev, "Unknown WM831x device %04x\n", ret);
ret = -EINVAL;
@@ -1376,6 +1528,12 @@ static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
NULL, 0);
break;
+ case WM8320:
+ ret = mfd_add_devices(wm831x->dev, -1,
+ wm8320_devs, ARRAY_SIZE(wm8320_devs),
+ NULL, 0);
+ break;
+
default:
/* If this happens the bus probe function is buggy */
BUG();
@@ -1501,6 +1659,7 @@ static const struct i2c_device_id wm831x_i2c_id[] = {
{ "wm8310", WM8310 },
{ "wm8311", WM8311 },
{ "wm8312", WM8312 },
+ { "wm8320", WM8320 },
{ }
};
MODULE_DEVICE_TABLE(i2c, wm831x_i2c_id);
diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h
index c1bc59f..d01d293 100644
--- a/include/linux/mfd/wm831x/core.h
+++ b/include/linux/mfd/wm831x/core.h
@@ -117,6 +117,7 @@
#define WM831X_DC3_SLEEP_CONTROL 0x4063
#define WM831X_DC4_CONTROL 0x4064
#define WM831X_DC4_SLEEP_CONTROL 0x4065
+#define WM832X_DC4_SLEEP_CONTROL 0x4067
#define WM831X_EPE1_CONTROL 0x4066
#define WM831X_EPE2_CONTROL 0x4067
#define WM831X_LDO1_CONTROL 0x4068
--
1.6.4.3
next prev parent reply other threads:[~2009-10-01 14:41 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-01 14:41 [PATCH 1/4] mfd: Refactor WM831x chip identification Mark Brown
2009-10-01 14:41 ` [PATCH 2/4] gpiolib: Make WM831x GPIO count dynamic Mark Brown
2009-10-01 14:41 ` [PATCH 3/4] power_supply: Factor out WM831x backup battery charger Mark Brown
2009-10-01 14:41 ` Mark Brown [this message]
2009-10-01 14:55 ` Anton Vorontsov
2009-10-01 15:03 ` Mark Brown
2009-10-01 15:27 ` Samuel Ortiz
2009-10-01 15:30 ` Anton Vorontsov
2009-10-01 15:35 ` [PATCH 1/4] mfd: Refactor WM831x chip identification Samuel Ortiz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1254408067-15908-4-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome