[PATCH] Re: spitz: add gpio button support (fixes regression)

[Stanislav Brabec <utx@penguin.cz>]

Pavel Machek wrote:
>Ok, lets do it that way, then.

Updating desc for lid keys and resending patch with proper comments:

Define Spitz buttons as GPIO keys in a way compatible with the old driver:

On/Off: As Suspend EV_PWR key

Raw values of lid sensors SWA and SWB: As EV_SW switches
SWA: Display Down
SWB: Lid Closed
Recommended user space decoding:
SWA==0 & SWB==0: lid opened (landscape mode)
SWA==1 & SWB==0: invalid (or mechanic race condition)
SWA==0 & SWB==1: lid closed with display up (portrait mode or mechanic
                 race condition while closing to display-less mode)
SWA==1 & SWB==1: lid closed with display down (display-less mode)

AK_INT remote trigger is not mapped as input event. Without complete
remote driver and remote pull-up control it has no useful
interpretation.

Signed-off-by: Stanislav Brabec <utx@penguin.cz>
Acked-by: Pavel Machek <pavel@ucw.cz>

diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index ee8d603..c690522 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <linux/gpio_keys.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
 #include <linux/mtd/physmap.h>
@@ -375,6 +376,43 @@ static struct platform_device spitzkbd_device = {
 };
 
 
+static struct gpio_keys_button spitz_gpio_keys[] = {
+	{
+		.type	= EV_PWR,
+		.code	= KEY_SUSPEND,
+		.gpio	= SPITZ_GPIO_ON_KEY,
+		.desc	= "On/Off",
+		.wakeup	= 1,
+	},
+	/* Two buttons detecting the lid state */
+	{
+		.type	= EV_SW,
+		.code	= 0,
+		.gpio	= SPITZ_GPIO_SWA,
+		.desc	= "Display Down",
+	},
+	{
+		.type	= EV_SW,
+		.code	= 1,
+		.gpio	= SPITZ_GPIO_SWB,
+		.desc	= "Lid Closed",
+	},
+};
+
+static struct gpio_keys_platform_data spitz_gpio_keys_platform_data = {
+	.buttons	= spitz_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(spitz_gpio_keys),
+};
+
+static struct platform_device spitz_gpio_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &spitz_gpio_keys_platform_data,
+	},
+};
+
+
 /*
  * Spitz LEDs
  */
@@ -689,6 +727,7 @@ static struct platform_device sharpsl_rom_device = {
 static struct platform_device *devices[] __initdata = {
 	&spitzscoop_device,
 	&spitzkbd_device,
+	&spitz_gpio_keys_device,
 	&spitzled_device,
 	&sharpsl_nand_device,
 	&sharpsl_rom_device,


________________________________________________________________________
Stanislav Brabec
http://www.penguin.cz/~utx