[PATCH 3/3] rtc: pcf50633: manage RTC alarm "pending" flag

[Paul Fertser <fercerpav@gmail.com>]

From: Werner Almesberger <werner@openmoko.org>

This patch adds setting and clearing of the "pending" flag of the
RTC alarm. The semantics follow the UEFI specification 2.2 available
at http://www.uefi.org/specs/, i.e., the "pending" flag is cleared
by disabling the alarm, but not by any other condition (such as the
passing of time, a successful wakeup, or setting of a new alarm.)

Signed-off-by: Werner Almesberger <werner@openmoko.org>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
---
 drivers/rtc/rtc-pcf50633.c |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/drivers/rtc/rtc-pcf50633.c b/drivers/rtc/rtc-pcf50633.c
index 33a10c4..8669815 100644
--- a/drivers/rtc/rtc-pcf50633.c
+++ b/drivers/rtc/rtc-pcf50633.c
@@ -58,6 +58,7 @@ struct pcf50633_time {
 struct pcf50633_rtc {
 	int alarm_enabled;
 	int second_enabled;
+	int alarm_pending;
 
 	struct pcf50633 *pcf;
 	struct rtc_device *rtc_dev;
@@ -209,6 +210,7 @@ static int pcf50633_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	rtc = dev_get_drvdata(dev);
 
 	alrm->enabled = rtc->alarm_enabled;
+	alrm->pending = rtc->alarm_pending;
 
 	ret = pcf50633_read_block(rtc->pcf, PCF50633_REG_RTCSCA,
 				PCF50633_TI_EXTENT, &pcf_tm.time[0]);
@@ -244,6 +246,8 @@ static int pcf50633_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	/* Returns 0 on success */
 	ret = pcf50633_write_block(rtc->pcf, PCF50633_REG_RTCSCA,
 				PCF50633_TI_EXTENT, &pcf_tm.time[0]);
+	if (!alrm->enabled)
+		rtc->alarm_pending = 0;
 
 	if (!alarm_masked || alrm->enabled)
 		pcf50633_irq_unmask(rtc->pcf, PCF50633_IRQ_ALARM);
@@ -268,6 +272,7 @@ static void pcf50633_rtc_irq(int irq, void *data)
 	switch (irq) {
 	case PCF50633_IRQ_ALARM:
 		rtc_update_irq(rtc->rtc_dev, 1, RTC_AF | RTC_IRQF);
+		rtc->alarm_pending = 1;
 		break;
 	case PCF50633_IRQ_SECOND:
 		rtc_update_irq(rtc->rtc_dev, 1, RTC_UF | RTC_IRQF);
-- 
1.6.0.6