[PATCH] drm/radeon/kms: Report vga connector is connected according to ddc_probe

[Jerome Glisse <jglisse@redhat.com>]

On broken EDID we were reporting vga connector to be disconnected
even if ddc probe did found a monitor. This patch report that the
connector is connected on such case. This allow drm to add a fail
safe mode (800x600 at the time of this patch) thus user can boot
and later add a mode which match its monitor capabilities.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
---
 drivers/gpu/drm/radeon/radeon_connectors.c |    9 +++++----
 1 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index 292b170..c928ccc 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -566,8 +566,9 @@ static enum drm_connector_status radeon_vga_detect(struct drm_connector *connect
 		radeon_i2c_do_lock(radeon_connector, 0);
 
 		if (!radeon_connector->edid) {
-			DRM_ERROR("DDC responded but not EDID found for %s\n",
-				  drm_get_connector_name(connector));
+			DRM_ERROR("%s: probed a monitor but no|invalid EDID\n",
+					drm_get_connector_name(connector));
+			ret = connector_status_connected;
 		} else {
 			radeon_connector->use_digital = !!(radeon_connector->edid->input & DRM_EDID_INPUT_DIGITAL);
 
@@ -720,8 +721,8 @@ static enum drm_connector_status radeon_dvi_detect(struct drm_connector *connect
 		radeon_i2c_do_lock(radeon_connector, 0);
 
 		if (!radeon_connector->edid) {
-			DRM_ERROR("DDC responded but not EDID found for %s\n",
-				  drm_get_connector_name(connector));
+			DRM_ERROR("%s: probed a monitor but no|invalid EDID\n",
+					drm_get_connector_name(connector));
 		} else {
 			radeon_connector->use_digital = !!(radeon_connector->edid->input & DRM_EDID_INPUT_DIGITAL);
 
-- 
1.6.5.2