From: Arnd Bergmann <arnd@arndb.de>
To: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org, David Miller <davem@davemloft.net>,
Stephen Hemminger <shemminger@vyatta.com>,
Herbert Xu <herbert@gondor.apana.org.au>,
Patrick McHardy <kaber@trash.net>,
Patrick Mullaney <pmullaney@novell.com>,
"Eric W. Biederman" <ebiederm@xmission.com>,
Edge Virtual Bridging <evb@yahoogroups.com>,
Anna Fischer <anna.fischer@hp.com>,
bridge@lists.linux-foundation.org,
virtualization@linux-foundation.com,
Jens Osterkamp <jens@linux.vnet.ibm.com>,
Gerhard Stenzel <gerhard.stenzel@de.ibm.com>,
Arnd Bergmann <arnd@arndb.de>
Subject: [PATCH 3/3] macvlan: export macvlan mode through netlink
Date: Tue, 17 Nov 2009 22:39:10 +0000 [thread overview]
Message-ID: <1258497551-25959-4-git-send-email-arnd@arndb.de> (raw)
In-Reply-To: <1258497551-25959-1-git-send-email-arnd@arndb.de>
In order to support all three modes of macvlan at
runtime, extend the existing netlink protocol
to allow choosing the mode per macvlan slave
interface.
This depends on a matching patch to iproute2
in order to become accessible in user land.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/net/macvlan.c | 67 +++++++++++++++++++++++++++++++++++++++++-----
include/linux/if_link.h | 15 ++++++++++
2 files changed, 74 insertions(+), 8 deletions(-)
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index fa8b568..731017e 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -33,12 +33,6 @@
#define MACVLAN_HASH_SIZE (1 << BITS_PER_BYTE)
-enum macvlan_type {
- MACVLAN_PRIVATE = 1,
- MACVLAN_VEPA = 2,
- MACVLAN_BRIDGE = 4,
-};
-
struct macvlan_port {
struct net_device *dev;
struct hlist_head vlan_hash[MACVLAN_HASH_SIZE];
@@ -51,7 +45,7 @@ struct macvlan_dev {
struct hlist_node hlist;
struct macvlan_port *port;
struct net_device *lowerdev;
- enum macvlan_mode mode;
+ enum ifla_macvlan_mode mode;
};
@@ -112,7 +106,7 @@ static int macvlan_addr_busy(const struct macvlan_port *port,
static void macvlan_broadcast(struct sk_buff *skb,
const struct macvlan_port *port,
struct net_device *src,
- enum macvlan_mode mode)
+ enum ifla_macvlan_mode mode)
{
const struct ethhdr *eth = eth_hdr(skb);
const struct macvlan_dev *vlan;
@@ -553,6 +547,18 @@ static int macvlan_validate(struct nlattr *tb[], struct nlattr *data[])
if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS])))
return -EADDRNOTAVAIL;
}
+
+ if (data && data[IFLA_MACVLAN_MODE]) {
+ u32 mode = nla_get_u32(data[IFLA_MACVLAN_MODE]);
+ switch (mode) {
+ case MACVLAN_MODE_PRIVATE:
+ case MACVLAN_MODE_VEPA:
+ case MACVLAN_MODE_BRIDGE:
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
return 0;
}
@@ -617,6 +623,13 @@ static int macvlan_newlink(struct net_device *dev,
vlan->dev = dev;
vlan->port = port;
+ vlan->mode = MACVLAN_MODE_VEPA;
+ if (data && data[IFLA_MACVLAN_MODE]) {
+ u32 mode = nla_get_u32(data[IFLA_MACVLAN_MODE]);
+
+ vlan->mode = mode;
+ }
+
err = register_netdevice(dev);
if (err < 0)
return err;
@@ -638,6 +651,39 @@ static void macvlan_dellink(struct net_device *dev)
macvlan_port_destroy(port->dev);
}
+static int macvlan_changelink(struct net_device *dev,
+ struct nlattr *tb[], struct nlattr *data[])
+{
+ struct macvlan_dev *vlan = netdev_priv(dev);
+ if (data && data[IFLA_MACVLAN_MODE]) {
+ u32 mode = nla_get_u32(data[IFLA_MACVLAN_MODE]);
+ vlan->mode = mode;
+ }
+
+ return 0;
+}
+
+static size_t macvlan_get_size(const struct net_device *dev)
+{
+ return nla_total_size(4);
+}
+
+static int macvlan_fill_info(struct sk_buff *skb,
+ const struct net_device *dev)
+{
+ struct macvlan_dev *vlan = netdev_priv(dev);
+
+ NLA_PUT_U32(skb, IFLA_MACVLAN_MODE, vlan->mode);
+ return 0;
+
+nla_put_failure:
+ return -EMSGSIZE;
+}
+
+static const struct nla_policy macvlan_policy[IFLA_MACVLAN_MAX + 1] = {
+ [IFLA_MACVLAN_MODE] = { .type = NLA_U32 },
+};
+
static struct rtnl_link_ops macvlan_link_ops __read_mostly = {
.kind = "macvlan",
.priv_size = sizeof(struct macvlan_dev),
@@ -646,6 +692,11 @@ static struct rtnl_link_ops macvlan_link_ops __read_mostly = {
.validate = macvlan_validate,
.newlink = macvlan_newlink,
.dellink = macvlan_dellink,
+ .maxtype = IFLA_MACVLAN_MAX,
+ .policy = macvlan_policy,
+ .changelink = macvlan_changelink,
+ .get_size = macvlan_get_size,
+ .fill_info = macvlan_fill_info,
};
static int macvlan_device_event(struct notifier_block *unused,
diff --git a/include/linux/if_link.h b/include/linux/if_link.h
index 176c518..ef70ebc 100644
--- a/include/linux/if_link.h
+++ b/include/linux/if_link.h
@@ -190,4 +190,19 @@ struct ifla_vlan_qos_mapping
__u32 to;
};
+/* MACVLAN section */
+enum {
+ IFLA_MACVLAN_UNSPEC,
+ IFLA_MACVLAN_MODE,
+ __IFLA_MACVLAN_MAX,
+};
+
+#define IFLA_MACVLAN_MAX (__IFLA_MACVLAN_MAX - 1)
+
+enum ifla_macvlan_mode {
+ MACVLAN_MODE_PRIVATE = 1, /* don't talk to other macvlans */
+ MACVLAN_MODE_VEPA = 2, /* talk to other ports through ext bridge */
+ MACVLAN_MODE_BRIDGE = 4, /* talk to bridge ports directly */
+};
+
#endif /* _LINUX_IF_LINK_H */
--
1.6.3.3
next prev parent reply other threads:[~2009-11-17 22:40 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-17 22:39 [PATCH 0/3] macvlan: add vepa and bridge mode Arnd Bergmann
2009-11-17 22:39 ` [PATCH 1/3] macvlan: Reflect macvlan packets meant for other macvlan devices Arnd Bergmann
2009-11-18 6:30 ` Eric Dumazet
2009-11-18 9:47 ` Arnd Bergmann
2009-11-18 14:37 ` Eric W. Biederman
2009-11-18 14:44 ` Arnd Bergmann
2009-11-18 23:32 ` Arnd Bergmann
2009-11-18 23:55 ` Eric W. Biederman
2009-11-19 11:44 ` Arnd Bergmann
2009-11-19 14:47 ` Patrick McHardy
2009-11-18 10:00 ` roel kluin
2009-11-17 22:39 ` [PATCH 2/3] macvlan: implement VEPA and private mode Arnd Bergmann
2009-11-18 6:42 ` Eric Dumazet
2009-11-18 9:48 ` Arnd Bergmann
2009-11-17 22:39 ` Arnd Bergmann [this message]
2009-11-18 6:48 ` [PATCH 3/3] macvlan: export macvlan mode through netlink Eric Dumazet
2009-11-18 9:59 ` Arnd Bergmann
2009-11-19 14:38 ` Patrick McHardy
2009-11-19 14:47 ` Arnd Bergmann
2009-11-17 22:39 ` [PATCH] iplink: add macvlan options for bridge mode Arnd Bergmann
2009-12-18 13:45 ` Arnd Bergmann
2009-12-18 17:25 ` Stephen Hemminger
2009-12-18 17:37 ` Arnd Bergmann
2009-11-17 22:56 ` [PATCH 0/3] macvlan: add vepa and " Arnd Bergmann
2009-11-18 9:01 ` Mark Smith
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1258497551-25959-4-git-send-email-arnd@arndb.de \
--to=arnd@arndb.de \
--cc=anna.fischer@hp.com \
--cc=bridge@lists.linux-foundation.org \
--cc=davem@davemloft.net \
--cc=ebiederm@xmission.com \
--cc=evb@yahoogroups.com \
--cc=gerhard.stenzel@de.ibm.com \
--cc=herbert@gondor.apana.org.au \
--cc=jens@linux.vnet.ibm.com \
--cc=kaber@trash.net \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pmullaney@novell.com \
--cc=shemminger@vyatta.com \
--cc=virtualization@linux-foundation.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®