[patch 2/3] rtc-x1205: reset clock to sane state after power failure

[Johannes Weiner <jw@emlix.com>]

When detecting power failure, the probe function would reset the clock
time to defined state.

However, the clock's _date_ might still be bogus and a subsequent
probe fails when sanity-checking these values.

Change the power-failure fixup code to do a full setting of rtc_time,
including a valid date.

Signed-off-by: Johannes Weiner <jw@emlix.com>
---
 drivers/rtc/rtc-x1205.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/rtc-x1205.c b/drivers/rtc/rtc-x1205.c
index cc9ba47..6583c1a 100644
--- a/drivers/rtc/rtc-x1205.c
+++ b/drivers/rtc/rtc-x1205.c
@@ -280,9 +280,9 @@ static int x1205_fix_osc(struct i2c_client *client)
 	int err;
 	struct rtc_time tm;
 
-	tm.tm_hour = tm.tm_min = tm.tm_sec = 0;
+	memset(&tm, 0, sizeof(tm));
 
-	err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE, 0);
+	err = x1205_set_datetime(client, &tm, 1, X1205_CCR_BASE, 0);
 	if (err < 0)
 		dev_err(&client->dev, "unable to restart the oscillator\n");
 
-- 
1.6.5