From: Ike Panhc <ike.pan@canonical.com>
To: linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org,
acpi4asus-user@lists.sourceforge.net
Cc: Corentin Chary <corentin.chary@gmail.com>,
Alexandre Rostovtsev <tetromino@gmail.com>
Subject: [Resend] [PATCH] asus-laptop: add Lenovo SL LenovoCare LED support
Date: Tue, 8 Dec 2009 15:37:09 +0800 [thread overview]
Message-ID: <1260257829-7343-1-git-send-email-ike.pan@canonical.com> (raw)
Resend because the email address of signed-off is wrong in prior mail
This patch is to enable the LenovoCare LED support on Lenovo SL laptop. Based
on the found of the control interface by Alexandre Rostovtsev
Turn on the LenovoCare LED:
(As root privileges) echo 1 > /sys/class/leds/asus\:\:LenovoCare/brightness
Trun off the LenovoCare LED:
(As root privileges) echo 0 > /sys/class/leds/asus\:\:LenovoCare/brightness
The patch against current checkout of acpi4asus is below.
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
---
drivers/platform/x86/asus-laptop.c | 21 ++++++++++++++++++---
1 files changed, 18 insertions(+), 3 deletions(-)
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index 3348cc6..f3c52b6 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -87,6 +87,7 @@
#define LCD_ON 0x80 /* LCD backlight */
#define GPS_ON 0x100 /* GPS */
#define KEY_ON 0x200 /* Keyboard backlight */
+#define LLED_ON 0x400 /* Lenovo SL: LenovoCare LED */
#define ASUS_LOG ASUS_HOTK_FILE ": "
#define ASUS_ERR KERN_ERR ASUS_LOG
@@ -123,6 +124,7 @@ ASUS_HANDLE(tled_set, ASUS_HOTK_PREFIX "TLED");
ASUS_HANDLE(rled_set, ASUS_HOTK_PREFIX "RLED"); /* W1JC */
ASUS_HANDLE(pled_set, ASUS_HOTK_PREFIX "PLED"); /* A7J */
ASUS_HANDLE(gled_set, ASUS_HOTK_PREFIX "GLED"); /* G1, G2 (probably) */
+ASUS_HANDLE(lled_set, "\\_SB_.PCI0.SBRG.EC0_.HKEY.TVLS"); /* LenovoCare */
/* LEDD */
ASUS_HANDLE(ledd_set, ASUS_HOTK_PREFIX "SLCM");
@@ -285,6 +287,7 @@ ASUS_LED(rled, "record", 1);
ASUS_LED(pled, "phone", 1);
ASUS_LED(gled, "gaming", 1);
ASUS_LED(kled, "kbd_backlight", 3);
+ASUS_LED(lled, "LenovoCare", 1);
struct key_entry {
char type;
@@ -419,6 +422,9 @@ static void write_status(acpi_handle handle, int out, int mask)
handle = (out) ? gps_on_handle : gps_off_handle;
out = 0x02;
break;
+ case LLED_ON:
+ out = (out & 0x1) * 0xFF;
+ break;
default:
out &= 0x1;
break;
@@ -452,6 +458,7 @@ ASUS_LED_HANDLER(pled, PLED_ON);
ASUS_LED_HANDLER(rled, RLED_ON);
ASUS_LED_HANDLER(tled, TLED_ON);
ASUS_LED_HANDLER(gled, GLED_ON);
+ASUS_LED_HANDLER(lled, LLED_ON);
/*
* Keyboard backlight
@@ -1146,6 +1153,7 @@ static int asus_hotk_get_info(void)
ASUS_HANDLE_INIT(rled_set);
ASUS_HANDLE_INIT(pled_set);
ASUS_HANDLE_INIT(gled_set);
+ ASUS_HANDLE_INIT(lled_set);
ASUS_HANDLE_INIT(ledd_set);
@@ -1338,6 +1346,7 @@ static void asus_led_exit(void)
ASUS_LED_UNREGISTER(rled);
ASUS_LED_UNREGISTER(gled);
ASUS_LED_UNREGISTER(kled);
+ ASUS_LED_UNREGISTER(lled);
}
static void asus_input_exit(void)
@@ -1417,19 +1426,25 @@ static int asus_led_init(struct device *dev)
if (rv)
goto out4;
+ rv = ASUS_LED_REGISTER(lled, dev);
+ if (rv)
+ goto out5;
+
if (kled_set_handle && kled_get_handle)
rv = ASUS_LED_REGISTER(kled, dev);
if (rv)
- goto out5;
+ goto out6;
led_workqueue = create_singlethread_workqueue("led_workqueue");
if (!led_workqueue)
- goto out6;
+ goto out7;
return 0;
-out6:
+out7:
rv = -ENOMEM;
ASUS_LED_UNREGISTER(kled);
+out6:
+ ASUS_LED_UNREGISTER(lled);
out5:
ASUS_LED_UNREGISTER(gled);
out4:
--
1.6.3.3
next reply other threads:[~2009-12-08 7:37 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-08 7:37 Ike Panhc [this message]
2009-12-08 7:43 ` Corentin Chary
2009-12-08 7:51 ` Ike Panhc
2009-12-08 15:41 ` Matthew Garrett
2009-12-08 17:32 ` Corentin Chary
2009-12-09 6:53 ` Ike Panhc
2009-12-09 7:47 ` Corentin Chary
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1260257829-7343-1-git-send-email-ike.pan@canonical.com \
--to=ike.pan@canonical.com \
--cc=acpi4asus-user@lists.sourceforge.net \
--cc=corentin.chary@gmail.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tetromino@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®