From: Yinghai Lu <yinghai@kernel.org>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>,
Andrew Morton <akpm@linux-foundation.org>,
Jesse Barnes <jbarnes@virtuousgeek.org>,
Christoph Lameter <cl@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH 03/37] x86/pci: use u64 instead of size_t in amd_bus.c
Date: Fri, 15 Jan 2010 19:06:34 -0800 [thread overview]
Message-ID: <1263611228-6751-4-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1263611228-6751-1-git-send-email-yinghai@kernel.org>
prepare to enable it for 32bit
-v2: remove not needed cast
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
arch/x86/pci/amd_bus.c | 16 ++++++++--------
1 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index 2356ea1..467dcac 100644
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -82,8 +82,8 @@ static int __init early_fill_mp_bus_info(void)
struct pci_root_info *info;
u32 reg;
struct resource *res;
- size_t start;
- size_t end;
+ u64 start;
+ u64 end;
struct range range[RANGE_NUM];
u64 val;
u32 address;
@@ -172,7 +172,7 @@ static int __init early_fill_mp_bus_info(void)
info = &pci_root_info[j];
printk(KERN_DEBUG "node %d link %d: io port [%llx, %llx]\n",
- node, link, (u64)start, (u64)end);
+ node, link, start, end);
/* kernel only handle 16 bit only */
if (end > 0xffff)
@@ -206,7 +206,7 @@ static int __init early_fill_mp_bus_info(void)
address = MSR_K8_TOP_MEM1;
rdmsrl(address, val);
end = (val & 0xffffff800000ULL);
- printk(KERN_INFO "TOM: %016lx aka %ldM\n", end, end>>20);
+ printk(KERN_INFO "TOM: %016llx aka %lldM\n", end, end>>20);
if (end < (1ULL<<32))
subtract_range(range, RANGE_NUM, 0, end - 1);
@@ -245,7 +245,7 @@ static int __init early_fill_mp_bus_info(void)
info = &pci_root_info[j];
printk(KERN_DEBUG "node %d link %d: mmio [%llx, %llx]",
- node, link, (u64)start, (u64)end);
+ node, link, start, end);
/*
* some sick allocation would have range overlap with fam10h
* mmconf range, so need to update start and end.
@@ -271,13 +271,13 @@ static int __init early_fill_mp_bus_info(void)
endx = fam10h_mmconf_start - 1;
update_res(info, start, endx, IORESOURCE_MEM, 0);
subtract_range(range, RANGE_NUM, start, endx);
- printk(KERN_CONT " ==> [%llx, %llx]", (u64)start, endx);
+ printk(KERN_CONT " ==> [%llx, %llx]", start, endx);
start = fam10h_mmconf_end + 1;
changed = 1;
}
if (changed) {
if (start <= end) {
- printk(KERN_CONT " %s [%llx, %llx]", endx?"and":"==>", (u64)start, (u64)end);
+ printk(KERN_CONT " %s [%llx, %llx]", endx?"and":"==>", start, end);
} else {
printk(KERN_CONT "%s\n", endx?"":" ==> none");
continue;
@@ -300,7 +300,7 @@ static int __init early_fill_mp_bus_info(void)
address = MSR_K8_TOP_MEM2;
rdmsrl(address, val);
end = (val & 0xffffff800000ULL);
- printk(KERN_INFO "TOM2: %016lx aka %ldM\n", end, end>>20);
+ printk(KERN_INFO "TOM2: %016llx aka %lldM\n", end, end>>20);
subtract_range(range, RANGE_NUM, 1ULL<<32, end - 1);
}
--
1.6.4.2
next prev parent reply other threads:[~2010-01-16 3:09 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-16 3:06 [PATCH -v4 0/37] x86: not use bootmem for x86 Yinghai Lu
2010-01-16 3:06 ` [PATCH 01/37] x86: move range related operation to one file Yinghai Lu
2010-01-19 16:54 ` Christoph Lameter
2010-01-20 19:37 ` Yinghai Lu
2010-01-20 19:51 ` Christoph Lameter
2010-01-20 19:59 ` Yinghai Lu
2010-01-16 3:06 ` [PATCH 02/37] x86: check range in update range Yinghai Lu
2010-01-19 16:56 ` Christoph Lameter
2010-01-20 19:39 ` Yinghai Lu
2010-01-20 19:50 ` Christoph Lameter
2010-01-20 19:57 ` Yinghai Lu
2010-01-16 3:06 ` Yinghai Lu [this message]
2010-01-16 3:06 ` [PATCH 04/37] x86/pci: add cap_resource Yinghai Lu
2010-01-16 3:06 ` [PATCH 05/37] x86/pci: enable pci root res read out for 32bit too Yinghai Lu
2010-01-16 3:06 ` [PATCH 06/37] x86: call early_res_to_bootmem one time Yinghai Lu
2010-01-16 3:06 ` [PATCH 07/37] x86: introduce max_early_res and early_res_count Yinghai Lu
2010-01-16 3:06 ` [PATCH 08/37] x86: dynamic increase early_res array size Yinghai Lu
2010-01-16 3:06 ` [PATCH 09/37] x86: print bootmem free before pci_iommu_alloc and free_all_bootmem -v2 Yinghai Lu
2010-01-16 3:06 ` [PATCH 10/37] x86: make early_node_mem get mem > 4g if possible Yinghai Lu
2010-01-16 3:06 ` [PATCH 11/37] x86: only call dma32_reserve_bootmem 64bit !CONFIG_NUMA Yinghai Lu
2010-01-16 3:06 ` [PATCH 12/37] x86: make 64 bit use early_res instead of bootmem before slab Yinghai Lu
2010-01-16 3:06 ` [PATCH 13/37] sparsemem: put usemap for one node together Yinghai Lu
2010-01-16 3:06 ` [PATCH 14/37] sparsemem: put mem map " Yinghai Lu
2010-01-19 17:13 ` Christoph Lameter
2010-01-16 3:06 ` [PATCH 15/37] x86: change range end to start+size Yinghai Lu
2010-01-16 3:06 ` [PATCH 16/37] x86: move bios page reserve early to head32/64.c Yinghai Lu
2010-01-16 3:06 ` [PATCH 17/37] x86: seperate early_res related code from e820.c Yinghai Lu
2010-01-16 3:06 ` [PATCH 18/37] x86: add find_early_area_size Yinghai Lu
2010-01-16 3:06 ` [PATCH 19/37] x86: move back find_e820_area to e820.c Yinghai Lu
2010-01-16 3:06 ` [PATCH 20/37] early_res: enhance check_and_double_early_res Yinghai Lu
2010-01-16 3:06 ` [PATCH 21/37] x86: make 32bit support NO_BOOTMEM Yinghai Lu
2010-01-16 3:06 ` [PATCH 22/37] move round_up/down to kernel.h Yinghai Lu
2010-01-19 17:57 ` Christoph Lameter
2010-01-20 20:01 ` Yinghai Lu
2010-01-20 20:28 ` Yinghai Lu
2010-01-20 20:52 ` Christoph Lameter
2010-01-20 21:02 ` Yinghai Lu
2010-01-26 0:40 ` Andrew Morton
2010-01-26 0:58 ` H. Peter Anvin
2010-01-26 1:26 ` Andrew Morton
2010-01-16 3:06 ` [PATCH 23/37] x86: add find_fw_memmap_area Yinghai Lu
2010-01-16 3:06 ` [PATCH 24/37] core: move early_res Yinghai Lu
2010-01-16 3:06 ` [PATCH 25/37] ram_buffer_extend_print Yinghai Lu
2010-01-19 17:59 ` Christoph Lameter
2010-01-16 3:06 ` [PATCH 26/37] x86: remove bios data range from e820 Yinghai Lu
2010-01-16 3:06 ` [PATCH 27/37] irq: remove not need bootmem code Yinghai Lu
2010-01-16 3:06 ` [PATCH 28/37] radix: move radix init early Yinghai Lu
2010-01-16 3:07 ` [PATCH 29/37] sparseirq: change irq_desc_ptrs to static Yinghai Lu
2010-01-19 18:01 ` Christoph Lameter
2010-01-20 19:49 ` Yinghai Lu
2010-01-16 3:07 ` [PATCH 30/37] sparseirq: use radix_tree instead of ptrs array Yinghai Lu
2010-01-16 3:07 ` [PATCH 31/37] x86: remove arch_probe_nr_irqs Yinghai Lu
2010-01-16 3:07 ` [PATCH 32/37] x86, apic: Use logical flat on intel with <= 8 logical cpus Yinghai Lu
2010-01-16 3:07 ` [PATCH 33/37] use nr_cpus= to set nr_cpu_ids early Yinghai Lu
2010-01-19 18:03 ` Christoph Lameter
2010-01-20 19:54 ` Yinghai Lu
2010-01-16 3:07 ` [PATCH 34/37] x86: using logical flat for amd cpu too Yinghai Lu
2010-01-16 3:07 ` [PATCH 35/37] x86: according to nr_cpu_ids to decide if need to leave logical flat Yinghai Lu
2010-01-16 3:07 ` [PATCH 36/37] x86: make 32bit apic flat to physflat switch like 64bit Yinghai Lu
2010-01-16 3:07 ` [PATCH 37/37] x86: use num_processors for possible cpus Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1263611228-6751-4-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=cl@linux-foundation.org \
--cc=hpa@zytor.com \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome