Re: sharp c-3000 aka spitz: fix warn_on introduced in 2.6.32-rc1

[Stanislav Brabec <utx@penguin.cz>]

Eric Miao wrote:
> >
> > I don't get it; what is pxa27x_keypad used on? It looks like
> > matrix-keypad subset.

> pxa27x has its own specific keypad controller. And since we now
> use enable_irq_wake, and the keypad controller has only one
> such IRQ_KEYPAD, will have to setup the keypad GPIO wakeup
> as a whole.

Looking deeper into it, the problem seems to be elsewhere:
I just added debug message to start and end of set_irq_wake().

And here is what I got during suspend:

set_irq_wake() started IRQ: 191 to 1, desc->wake_depth: 0
set_irq_wake() done IRQ: 191 to 1, desc->wake_depth: 0
set_irq_wake() started IRQ: 108 to 1, desc->wake_depth: 0
set_irq_wake() done IRQ: 108 to 1, desc->wake_depth: 1
set_irq_wake() started IRQ: 113 to 1, desc->wake_depth: 0
set_irq_wake() done IRQ: 113 to 1, desc->wake_depth: 0
set_irq_wake() started IRQ: 187 to 1, desc->wake_depth: 0
set_irq_wake() done IRQ: 187 to 1, desc->wake_depth: 0
set_irq_wake() started IRQ: 130 to 1, desc->wake_depth: 0
set_irq_wake() done IRQ: 130 to 1, desc->wake_depth: 0
set_irq_wake() started IRQ: 132 to 1, desc->wake_depth: 0
set_irq_wake() done IRQ: 132 to 1, desc->wake_depth: 0
set_irq_wake() started IRQ: 134 to 1, desc->wake_depth: 0
set_irq_wake() done IRQ: 134 to 1, desc->wake_depth: 0
set_irq_wake() started IRQ: 135 to 1, desc->wake_depth: 0
set_irq_wake() done IRQ: 135 to 1, desc->wake_depth: 0
set_irq_wake() started IRQ: 31 to 1, desc->wake_depth: 0
set_irq_wake() done IRQ: 31 to 1, desc->wake_depth: 1

I think that if (desc->wake_depth == 0) when set_irq_wake(foo, 1) is
done, then something went wrong. And it is not surprise, that it reports
Unbalanced IRQ on resume.

Note that other people (Cyril Hrubiš) with a bit different .config
report success with gpio keys driver turned on.

My config:
http://www.penguin.cz/~utx/zaurus/feed/images/spitz/config-2.6.33-rc4-spitz

OT: Serial console resume did not work properly even with
no_console_suspend and my patch:
[PATCH 4/8] serial-core: resume serial hardware with no_console_suspend


________________________________________________________________________
Stanislav Brabec
http://www.penguin.cz/~utx/zaurus