From: Yinghai Lu <yinghai@kernel.org>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>,
Andrew Morton <akpm@linux-foundation.org>,
Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>,
Christoph Lameter <cl@linux-foundation.org>,
linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH 24/35] x86: make 32bit support NO_BOOTMEM
Date: Wed, 10 Feb 2010 01:20:28 -0800 [thread overview]
Message-ID: <1265793639-15071-25-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1265793639-15071-1-git-send-email-yinghai@kernel.org>
let's make 32bit consistent with 64bit
-v2: Andrew pointed out for 32bit that we should use -1ULL
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/Kconfig | 1 -
arch/x86/kernel/early_res.c | 3 +++
arch/x86/mm/init_32.c | 6 ++++++
arch/x86/mm/numa_32.c | 3 +++
4 files changed, 12 insertions(+), 1 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 9543984..29f9efb 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -571,7 +571,6 @@ config PARAVIRT_DEBUG
config NO_BOOTMEM
default y
bool "Disable Bootmem code"
- depends on X86_64
---help---
Use early_res directly instead of bootmem before slab is ready.
- allocator (buddy) [generic]
diff --git a/arch/x86/kernel/early_res.c b/arch/x86/kernel/early_res.c
index 52804e9..c8be692 100644
--- a/arch/x86/kernel/early_res.c
+++ b/arch/x86/kernel/early_res.c
@@ -354,6 +354,9 @@ int __init get_free_all_memory_range(struct range **rangep, int nodeid)
/* need to go over early_node_map to find out good range for node */
nr_range = add_from_early_node_map(range, count, nr_range, nodeid);
+#ifdef CONFIG_X86_32
+ subtract_range(range, count, max_low_pfn, -1ULL);
+#endif
subtract_early_res(range, count);
nr_range = clean_sort_range(range, count);
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 2dccde0..262867a 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -748,6 +748,7 @@ static void __init zone_sizes_init(void)
free_area_init_nodes(max_zone_pfns);
}
+#ifndef CONFIG_NO_BOOTMEM
static unsigned long __init setup_node_bootmem(int nodeid,
unsigned long start_pfn,
unsigned long end_pfn,
@@ -767,9 +768,11 @@ static unsigned long __init setup_node_bootmem(int nodeid,
return bootmap + bootmap_size;
}
+#endif
void __init setup_bootmem_allocator(void)
{
+#ifndef CONFIG_NO_BOOTMEM
int nodeid;
unsigned long bootmap_size, bootmap;
/*
@@ -781,11 +784,13 @@ void __init setup_bootmem_allocator(void)
if (bootmap == -1L)
panic("Cannot find bootmem map of size %ld\n", bootmap_size);
reserve_early(bootmap, bootmap + bootmap_size, "BOOTMAP");
+#endif
printk(KERN_INFO " mapped low ram: 0 - %08lx\n",
max_pfn_mapped<<PAGE_SHIFT);
printk(KERN_INFO " low ram: 0 - %08lx\n", max_low_pfn<<PAGE_SHIFT);
+#ifndef CONFIG_NO_BOOTMEM
for_each_online_node(nodeid) {
unsigned long start_pfn, end_pfn;
@@ -803,6 +808,7 @@ void __init setup_bootmem_allocator(void)
bootmap = setup_node_bootmem(nodeid, start_pfn, end_pfn,
bootmap);
}
+#endif
after_bootmem = 1;
}
diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c
index b20760c..809baaa 100644
--- a/arch/x86/mm/numa_32.c
+++ b/arch/x86/mm/numa_32.c
@@ -418,7 +418,10 @@ void __init initmem_init(unsigned long start_pfn, unsigned long end_pfn,
for_each_online_node(nid) {
memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
+ NODE_DATA(nid)->node_id = nid;
+#ifndef CONFIG_NO_BOOTMEM
NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
+#endif
}
setup_bootmem_allocator();
--
1.6.4.2
next prev parent reply other threads:[~2010-02-10 9:22 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-10 9:20 [PATCH -v7 0/35] tip related: not use bootmem for x86 Yinghai Lu
2010-02-10 9:20 ` [PATCH 01/35] x86: fix sci on ioapic 1 Yinghai Lu
2010-02-10 22:48 ` [tip:x86/urgent] x86: Fix SCI on IOAPIC != 0 tip-bot for Yinghai Lu
2010-02-10 9:20 ` [PATCH 02/35] x86: keep chip_data in create_irq_nr and destroy_irq Yinghai Lu
2010-02-10 22:39 ` [tip:x86/irq] x86: Avoid race condition in pci_enable_msix() tip-bot for Brandon Phiilps
2010-02-10 9:20 ` [PATCH 03/35] x86: move range related operation to one file Yinghai Lu
2010-02-10 9:20 ` [PATCH 04/35] x86/pci: use resource_size_t in update_res Yinghai Lu
2010-02-10 9:20 ` [PATCH 05/35] x86/pci: amd one chain system to use pci read out res Yinghai Lu
2010-02-10 9:20 ` [PATCH 06/35] x86/pci: use u64 instead of size_t in amd_bus.c Yinghai Lu
2010-02-10 9:20 ` [PATCH 07/35] x86/pci: add cap_resource Yinghai Lu
2010-02-10 9:20 ` [PATCH 08/35] x86/pci: enable pci root res read out for 32bit too Yinghai Lu
2010-02-10 9:20 ` [PATCH 09/35] x86: change range end to start+size Yinghai Lu
2010-02-10 9:20 ` [PATCH 10/35] x86: print out for RAM buffer Yinghai Lu
2010-02-10 9:20 ` [PATCH 11/35] x86: call early_res_to_bootmem one time Yinghai Lu
2010-02-10 9:20 ` [PATCH 12/35] x86: introduce max_early_res and early_res_count Yinghai Lu
2010-02-10 9:20 ` [PATCH 13/35] x86: dynamic increase early_res array size Yinghai Lu
2010-02-10 9:20 ` [PATCH 14/35] x86: make early_node_mem get mem > 4g if possible Yinghai Lu
2010-02-10 9:20 ` [PATCH 15/35] x86: only call dma32_reserve_bootmem 64bit !CONFIG_NUMA Yinghai Lu
2010-02-10 9:20 ` [PATCH 16/35] x86: make 64 bit use early_res instead of bootmem before slab Yinghai Lu
2010-02-14 14:08 ` Stephen Rothwell
2010-02-14 20:31 ` Yinghai Lu
2010-02-17 1:16 ` Yinghai Lu
2010-02-24 22:59 ` Peter Zijlstra
2010-02-24 23:29 ` Yinghai Lu
2010-02-24 23:32 ` Yinghai Lu
2010-02-25 2:07 ` Tejun Heo
2010-02-25 2:13 ` Yinghai Lu
2010-02-25 2:33 ` Tejun Heo
2010-02-25 2:36 ` [PATCH] early_res: add free_early_partial Yinghai Lu
2010-02-25 11:10 ` Peter Zijlstra
2010-03-02 2:48 ` [PATCH] early_res: need to save name aside with free_early_partial Yinghai Lu
2010-02-10 9:20 ` [PATCH 17/35] sparsemem: put usemap for one node together Yinghai Lu
2010-02-10 9:20 ` [PATCH 18/35] sparsemem: put mem map " Yinghai Lu
2010-02-10 9:20 ` [PATCH 19/35] x86: move bios page reserve early to head32/64.c Yinghai Lu
2010-02-10 9:20 ` [PATCH 20/35] x86: seperate early_res related code from e820.c Yinghai Lu
2010-02-10 9:20 ` [PATCH 21/35] x86: add find_early_area_size Yinghai Lu
2010-02-10 9:20 ` [PATCH 22/35] x86: move back find_e820_area to e820.c Yinghai Lu
2010-02-10 9:20 ` [PATCH 23/35] early_res: enhance check_and_double_early_res Yinghai Lu
2010-02-10 9:20 ` Yinghai Lu [this message]
2010-02-10 9:20 ` [PATCH 25/35] move round_up/down to kernel.h Yinghai Lu
2010-02-13 18:49 ` Joe Perches
2010-02-13 19:52 ` H. Peter Anvin
2010-02-13 20:11 ` Andrew Morton
2010-02-13 21:57 ` H. Peter Anvin
2010-02-10 9:20 ` [PATCH 26/35] x86: add find_fw_memmap_area Yinghai Lu
2010-02-10 9:20 ` [PATCH 27/35] core: move early_res Yinghai Lu
2010-02-14 14:16 ` Stephen Rothwell
2010-02-14 17:08 ` Ingo Molnar
2010-02-14 23:43 ` Stephen Rothwell
2010-02-15 4:44 ` Ingo Molnar
2010-02-14 20:46 ` Yinghai Lu
2010-02-16 23:46 ` H. Peter Anvin
2010-02-16 23:53 ` Yinghai Lu
2010-02-17 0:01 ` H. Peter Anvin
2010-02-17 0:41 ` Yinghai Lu
2010-02-17 0:46 ` H. Peter Anvin
2010-02-17 1:10 ` Yinghai Lu
2010-02-17 2:40 ` Yinghai Lu
2010-02-10 9:20 ` [PATCH 28/35] irq: remove not need bootmem code Yinghai Lu
2010-02-18 1:57 ` [tip:x86/irq] irq: Remove unnecessary " tip-bot for Yinghai Lu
2010-02-10 9:20 ` [PATCH 29/35] radix: move radix init early Yinghai Lu
2010-02-18 1:57 ` [tip:x86/irq] init: Move radix_tree_init() early tip-bot for Yinghai Lu
2010-02-10 9:20 ` [PATCH 30/35] sparseirq: change irq_desc_ptrs to static Yinghai Lu
2010-02-18 1:58 ` [tip:x86/irq] sparseirq: Change " tip-bot for Yinghai Lu
2010-02-10 9:20 ` [PATCH 31/35] sparseirq: use radix_tree instead of ptrs array Yinghai Lu
2010-02-18 1:58 ` [tip:x86/irq] sparseirq: Use " tip-bot for Yinghai Lu
2010-02-10 9:20 ` [PATCH 32/35] x86: remove arch_probe_nr_irqs Yinghai Lu
2010-02-18 1:58 ` [tip:x86/irq] x86, irq: Remove arch_probe_nr_irqs tip-bot for Yinghai Lu
2010-02-10 9:20 ` [PATCH 33/35] use nr_cpus= to set nr_cpu_ids early Yinghai Lu
2010-02-18 1:59 ` [tip:x86/irq] smp: Use " tip-bot for Yinghai Lu
2010-02-10 9:20 ` [PATCH 34/35] x86: use num_processors for possible cpus Yinghai Lu
2010-02-18 1:32 ` H. Peter Anvin
2010-02-18 2:38 ` Yinghai Lu
2010-02-18 17:26 ` H. Peter Anvin
2010-02-18 19:48 ` Christoph Lameter
2010-02-18 19:53 ` H. Peter Anvin
2010-02-19 15:14 ` Christoph Lameter
2010-02-19 16:14 ` H. Peter Anvin
2010-02-10 9:20 ` [PATCH 35/35] x86: make 32bit apic flat to physflat switch like 64bit Yinghai Lu
2010-02-11 16:14 ` [PATCH -v7 0/35] tip related: not use bootmem for x86 Ingo Molnar
2010-02-11 21:10 ` Yinghai Lu
2010-02-15 2:27 ` Benjamin Herrenschmidt
2010-02-15 4:50 ` Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1265793639-15071-25-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=cl@linux-foundation.org \
--cc=hpa@zytor.com \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome