mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Avi Kivity <avi@redhat.com>
To: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 01/39] KVM: PPC: Enable lightweight exits again
Date: Sat, 13 Feb 2010 10:01:21 +0200	[thread overview]
Message-ID: <1266048119-14325-2-git-send-email-avi@redhat.com> (raw)
In-Reply-To: <1266048119-14325-1-git-send-email-avi@redhat.com>

From: Alexander Graf <agraf@suse.de>

The PowerPC C ABI defines that registers r14-r31 need to be preserved across
function calls. Since our exit handler is written in C, we can make use of that
and don't need to reload r14-r31 on every entry/exit cycle.

This technique is also used in the BookE code and is called "lightweight exits"
there. To follow the tradition, it's called the same in Book3S.

So far this optimization was disabled though, as the code didn't do what it was
expected to do, but failed to work.

This patch fixes and enables lightweight exits again.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/powerpc/kvm/book3s.c               |    4 +-
 arch/powerpc/kvm/book3s_64_interrupts.S |  106 ++++++++++++++++---------------
 2 files changed, 57 insertions(+), 53 deletions(-)

diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 492dcc1..fd2a4d5 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -539,8 +539,6 @@ int kvmppc_handle_pagefault(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		r = kvmppc_emulate_mmio(run, vcpu);
 		if ( r == RESUME_HOST_NV )
 			r = RESUME_HOST;
-		if ( r == RESUME_GUEST_NV )
-			r = RESUME_GUEST;
 	}
 
 	return r;
@@ -645,7 +643,7 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		er = kvmppc_emulate_instruction(run, vcpu);
 		switch (er) {
 		case EMULATE_DONE:
-			r = RESUME_GUEST;
+			r = RESUME_GUEST_NV;
 			break;
 		case EMULATE_FAIL:
 			printk(KERN_CRIT "%s: emulation at %lx failed (%08x)\n",
diff --git a/arch/powerpc/kvm/book3s_64_interrupts.S b/arch/powerpc/kvm/book3s_64_interrupts.S
index 7b55d80..d95d0d9 100644
--- a/arch/powerpc/kvm/book3s_64_interrupts.S
+++ b/arch/powerpc/kvm/book3s_64_interrupts.S
@@ -40,6 +40,26 @@
        mtmsrd  r0,1
 .endm
 
+#define VCPU_LOAD_NVGPRS(vcpu) \
+	ld	r14, VCPU_GPR(r14)(vcpu); \
+	ld	r15, VCPU_GPR(r15)(vcpu); \
+	ld	r16, VCPU_GPR(r16)(vcpu); \
+	ld	r17, VCPU_GPR(r17)(vcpu); \
+	ld	r18, VCPU_GPR(r18)(vcpu); \
+	ld	r19, VCPU_GPR(r19)(vcpu); \
+	ld	r20, VCPU_GPR(r20)(vcpu); \
+	ld	r21, VCPU_GPR(r21)(vcpu); \
+	ld	r22, VCPU_GPR(r22)(vcpu); \
+	ld	r23, VCPU_GPR(r23)(vcpu); \
+	ld	r24, VCPU_GPR(r24)(vcpu); \
+	ld	r25, VCPU_GPR(r25)(vcpu); \
+	ld	r26, VCPU_GPR(r26)(vcpu); \
+	ld	r27, VCPU_GPR(r27)(vcpu); \
+	ld	r28, VCPU_GPR(r28)(vcpu); \
+	ld	r29, VCPU_GPR(r29)(vcpu); \
+	ld	r30, VCPU_GPR(r30)(vcpu); \
+	ld	r31, VCPU_GPR(r31)(vcpu); \
+
 /*****************************************************************************
  *                                                                           *
  *     Guest entry / exit code that is in kernel module memory (highmem)     *
@@ -67,12 +87,16 @@ kvm_start_entry:
 	SAVE_NVGPRS(r1)
 
 	/* Save LR */
-	mflr	r14
-	std	r14, _LINK(r1)
+	std	r0, _LINK(r1)
+
+	/* Load non-volatile guest state from the vcpu */
+	VCPU_LOAD_NVGPRS(r4)
 
-/* XXX optimize non-volatile loading away */
 kvm_start_lightweight:
 
+	ld	r9, VCPU_PC(r4)			/* r9 = vcpu->arch.pc */
+	ld	r10, VCPU_SHADOW_MSR(r4)	/* r10 = vcpu->arch.shadow_msr */
+
 	DISABLE_INTERRUPTS
 
 	/* Save R1/R2 in the PACA */
@@ -81,29 +105,6 @@ kvm_start_lightweight:
 	ld	r3, VCPU_HIGHMEM_HANDLER(r4)
 	std	r3, PACASAVEDMSR(r13)
 
-	/* Load non-volatile guest state from the vcpu */
-	ld	r14, VCPU_GPR(r14)(r4)
-	ld	r15, VCPU_GPR(r15)(r4)
-	ld	r16, VCPU_GPR(r16)(r4)
-	ld	r17, VCPU_GPR(r17)(r4)
-	ld	r18, VCPU_GPR(r18)(r4)
-	ld	r19, VCPU_GPR(r19)(r4)
-	ld	r20, VCPU_GPR(r20)(r4)
-	ld	r21, VCPU_GPR(r21)(r4)
-	ld	r22, VCPU_GPR(r22)(r4)
-	ld	r23, VCPU_GPR(r23)(r4)
-	ld	r24, VCPU_GPR(r24)(r4)
-	ld	r25, VCPU_GPR(r25)(r4)
-	ld	r26, VCPU_GPR(r26)(r4)
-	ld	r27, VCPU_GPR(r27)(r4)
-	ld	r28, VCPU_GPR(r28)(r4)
-	ld	r29, VCPU_GPR(r29)(r4)
-	ld	r30, VCPU_GPR(r30)(r4)
-	ld	r31, VCPU_GPR(r31)(r4)
-
-	ld	r9, VCPU_PC(r4)			/* r9 = vcpu->arch.pc */
-	ld	r10, VCPU_SHADOW_MSR(r4)	/* r10 = vcpu->arch.shadow_msr */
-
 	ld	r3, VCPU_TRAMPOLINE_ENTER(r4)
 	mtsrr0	r3
 
@@ -247,7 +248,6 @@ kvmppc_handler_highmem:
 
 no_dcbz32_off:
 
-	/* XXX maybe skip on lightweight? */
 	std	r14, VCPU_GPR(r14)(r12)
 	std	r15, VCPU_GPR(r15)(r12)
 	std	r16, VCPU_GPR(r16)(r12)
@@ -267,9 +267,6 @@ no_dcbz32_off:
 	std	r30, VCPU_GPR(r30)(r12)
 	std	r31, VCPU_GPR(r31)(r12)
 
-	/* Restore non-volatile host registers (r14 - r31) */
-	REST_NVGPRS(r1)
-
 	/* Save guest PC (R10) */
 	std	r10, VCPU_PC(r12)
 
@@ -351,42 +348,51 @@ kvm_return_point:
 
 	/* Jump back to lightweight entry if we're supposed to */
 	/* go back into the guest */
+
+	/* Pass the exit number as 3rd argument to kvmppc_handle_exit */
 	mr	r5, r3
+
 	/* Restore r3 (kvm_run) and r4 (vcpu) */
 	REST_2GPRS(3, r1)
 	bl	KVMPPC_HANDLE_EXIT
 
-#if 0 /* XXX get lightweight exits back */
+	/* If RESUME_GUEST, get back in the loop */
 	cmpwi	r3, RESUME_GUEST
-	bne	kvm_exit_heavyweight
+	beq	kvm_loop_lightweight
 
-	/* put VCPU and KVM_RUN back into place and roll again! */
-	REST_2GPRS(3, r1)
-	b	kvm_start_lightweight
+	cmpwi	r3, RESUME_GUEST_NV
+	beq	kvm_loop_heavyweight
 
-kvm_exit_heavyweight:
-	/* Restore non-volatile host registers */
-	ld	r14, _LINK(r1)
-	mtlr	r14
-	REST_NVGPRS(r1)
+kvm_exit_loop:
 
-	addi    r1, r1, SWITCH_FRAME_SIZE
-#else
 	ld	r4, _LINK(r1)
 	mtlr	r4
 
-	cmpwi	r3, RESUME_GUEST
-	bne	kvm_exit_heavyweight
+	/* Restore non-volatile host registers (r14 - r31) */
+	REST_NVGPRS(r1)
+
+	addi    r1, r1, SWITCH_FRAME_SIZE
+	blr
+
+kvm_loop_heavyweight:
 
+	ld	r4, _LINK(r1)
+	std     r4, (16 + SWITCH_FRAME_SIZE)(r1)
+
+	/* Load vcpu and cpu_run */
 	REST_2GPRS(3, r1)
 
-	addi    r1, r1, SWITCH_FRAME_SIZE
+	/* Load non-volatile guest state from the vcpu */
+	VCPU_LOAD_NVGPRS(r4)
 
-	b	kvm_start_entry
+	/* Jump back into the beginning of this function */
+	b	kvm_start_lightweight
 
-kvm_exit_heavyweight:
+kvm_loop_lightweight:
 
-	addi    r1, r1, SWITCH_FRAME_SIZE
-#endif
+	/* We'll need the vcpu pointer */
+	REST_GPR(4, r1)
+
+	/* Jump back into the beginning of this function */
+	b	kvm_start_lightweight
 
-	blr
-- 
1.6.5.3


  reply	other threads:[~2010-02-13  8:02 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-02-13  8:01 [PATCH 00/39] KVM updates for the 2.6.34 merge window (batch 2/4) Avi Kivity
2010-02-13  8:01 ` Avi Kivity [this message]
2010-02-13  8:01 ` [PATCH 02/39] KVM: x86: Moving PT_*_LEVEL to mmu.h Avi Kivity
2010-02-13  8:01 ` [PATCH 03/39] KVM: x86: Rename gb_page_enable() to get_lpage_level() in kvm_x86_ops Avi Kivity
2010-02-13  8:01 ` [PATCH 04/39] KVM: VMX: Enable EPT 1GB page support Avi Kivity
2010-02-13  8:01 ` [PATCH 05/39] KVM: Fix the explanation of write_emulated Avi Kivity
2010-02-13  8:01 ` [PATCH 06/39] KVM: PPC: Use accessor functions for GPR access Avi Kivity
2010-02-13  8:01 ` [PATCH 07/39] KVM: PPC: Add helpers for CR, XER Avi Kivity
2010-02-13  8:01 ` [PATCH 08/39] KVM: PPC: Use PACA backed shadow vcpu Avi Kivity
2010-02-13  8:01 ` [PATCH 09/39] KVM: PPC: Implement 'skip instruction' mode Avi Kivity
2010-02-13  8:01 ` [PATCH 10/39] KVM: PPC: Get rid of unnecessary RFI Avi Kivity
2010-02-13  8:01 ` [PATCH 11/39] KVM: PPC: Call SLB patching code in interrupt safe manner Avi Kivity
2010-02-13  8:01 ` [PATCH 12/39] KVM: PPC: Emulate trap SRR1 flags properly Avi Kivity
2010-02-13  8:01 ` [PATCH 13/39] KVM: PPC: Fix HID5 setting code Avi Kivity
2010-02-13  8:01 ` [PATCH 14/39] KVM: PPC: Pass program interrupt flags to the guest Avi Kivity
2010-02-13  8:01 ` [PATCH 15/39] KVM: PPC: Pass through program interrupts Avi Kivity
2010-02-13  8:01 ` [PATCH 16/39] KVM: PPC: Make large pages work Avi Kivity
2010-02-13  8:01 ` [PATCH 17/39] KVM: VMX: trace clts and lmsw instructions as cr accesses Avi Kivity
2010-02-13  8:01 ` [PATCH 18/39] KVM: Replace read accesses of vcpu->arch.cr0 by an accessor Avi Kivity
2010-02-13  8:01 ` [PATCH 19/39] KVM: VMX: Allow the guest to own some cr0 bits Avi Kivity
2010-02-13  8:01 ` [PATCH 20/39] KVM: Lazify fpu activation and deactivation Avi Kivity
2010-02-13  8:01 ` [PATCH 21/39] KVM: VMX: Give the guest ownership of cr0.ts when the fpu is active Avi Kivity
2010-02-13  8:01 ` [PATCH 22/39] KVM: Set cr0.et when the guest writes cr0 Avi Kivity
2010-02-13  8:01 ` [PATCH 23/39] KVM: SVM: Fix SVM_CR0_SELECTIVE_MASK Avi Kivity
2010-02-13  8:01 ` [PATCH 24/39] KVM: SVM: Initialize fpu_active in init_vmcb() Avi Kivity
2010-02-13  8:01 ` [PATCH 25/39] KVM: SVM: Restore unconditional cr0 intercept under npt Avi Kivity
2010-02-13  8:01 ` [PATCH 26/39] KVM: SVM: Selective cr0 intercept Avi Kivity
2010-02-13  8:01 ` [PATCH 27/39] KVM: SVM: Lazy fpu with npt Avi Kivity
2010-02-13  8:01 ` [PATCH 28/39] KVM: ia64: remove redundant kvm_get_exit_data() NULL tests Avi Kivity
2010-02-13  8:01 ` [PATCH 29/39] KVM: PPC: Export __giveup_vsx Avi Kivity
2010-02-13  8:01 ` [PATCH 30/39] KVM: PPC: Add helper functions to call real mode loaders Avi Kivity
2010-02-13  8:01 ` [PATCH 31/39] KVM: PPC: Add support for FPU/Altivec/VSX Avi Kivity
2010-02-13  8:01 ` [PATCH 32/39] KVM: PPC: Fix initial GPR settings Avi Kivity
2010-02-13  8:01 ` [PATCH 33/39] KVM: PPC: Keep SRR1 flags around in shadow_msr Avi Kivity
2010-02-13  8:01 ` [PATCH 34/39] KVM: PPC: Move Shadow MSR calculation to function Avi Kivity
2010-02-13  8:01 ` [PATCH 35/39] KVM: Add HYPER-V header file Avi Kivity
2010-02-13  8:01 ` [PATCH 36/39] KVM: Implement bare minimum of HYPER-V MSRs Avi Kivity
2010-02-13  8:01 ` [PATCH 37/39] KVM: Add HYPER-V apic access MSRs Avi Kivity
2010-02-13  8:01 ` [PATCH 38/39] KVM: Implement NotifyLongSpinWait HYPER-V hypercall Avi Kivity
2010-02-13  8:01 ` [PATCH 39/39] KVM: rename is_writeble_pte() to is_writable_pte() Avi Kivity

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1266048119-14325-2-git-send-email-avi@redhat.com \
    --to=avi@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome