From: Samu Onkalo <samu.p.onkalo@nokia.com>
To: eric.piel@tremplin-utc.net
Cc: pavel@ucw.cz, daniel@caiaq.de, lm-sensors@lm-sensors.org,
linux-kernel@vger.kernel.org,
Samu Onkalo <samu.p.onkalo@nokia.com>
Subject: [PATCH V2 4/6] lis3: Add skeletons for interrupt handlers
Date: Tue, 16 Feb 2010 13:09:29 +0200 [thread overview]
Message-ID: <1266318571-31083-5-git-send-email-samu.p.onkalo@nokia.com> (raw)
In-Reply-To: <1266318571-31083-1-git-send-email-samu.p.onkalo@nokia.com>
Original lis3 driver didn't provide interrupt handler(s) for
click or threshold event handling. This patch adds threaded handlers
for one or two interrupt lines for 8 bit device.
Actual content for interrupt handling is provided in the
separate patch.
Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Tested-by: Daniel Mack <daniel@caiaq.de>
---
drivers/hwmon/lis3lv02d.c | 87 +++++++++++++++++++++++++++++++++------------
include/linux/lis3lv02d.h | 1 +
2 files changed, 65 insertions(+), 23 deletions(-)
diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c
index 50f3123..3c06350 100644
--- a/drivers/hwmon/lis3lv02d.c
+++ b/drivers/hwmon/lis3lv02d.c
@@ -251,6 +251,9 @@ EXPORT_SYMBOL_GPL(lis3lv02d_poweron);
static irqreturn_t lis302dl_interrupt(int irq, void *dummy)
{
+ if (!test_bit(0, &lis3_dev.misc_opened))
+ goto out;
+
/*
* Be careful: on some HP laptops the bios force DD when on battery and
* the lid is closed. This leads to interrupts as soon as a little move
@@ -260,44 +263,35 @@ static irqreturn_t lis302dl_interrupt(int irq, void *dummy)
wake_up_interruptible(&lis3_dev.misc_wait);
kill_fasync(&lis3_dev.async_queue, SIGIO, POLL_IN);
+out:
+ if (lis3_dev.whoami == WAI_8B && lis3_dev.idev &&
+ lis3_dev.idev->input->users)
+ return IRQ_WAKE_THREAD;
return IRQ_HANDLED;
}
-static int lis3lv02d_misc_open(struct inode *inode, struct file *file)
+static irqreturn_t lis302dl_interrupt_thread1_8b(int irq, void *data)
{
- int ret;
+ return IRQ_HANDLED;
+}
+static irqreturn_t lis302dl_interrupt_thread2_8b(int irq, void *data)
+{
+ return IRQ_HANDLED;
+}
+
+static int lis3lv02d_misc_open(struct inode *inode, struct file *file)
+{
if (test_and_set_bit(0, &lis3_dev.misc_opened))
return -EBUSY; /* already open */
atomic_set(&lis3_dev.count, 0);
-
- /*
- * The sensor can generate interrupts for free-fall and direction
- * detection (distinguishable with FF_WU_SRC and DD_SRC) but to keep
- * the things simple and _fast_ we activate it only for free-fall, so
- * no need to read register (very slow with ACPI). For the same reason,
- * we forbid shared interrupts.
- *
- * IRQF_TRIGGER_RISING seems pointless on HP laptops because the
- * io-apic is not configurable (and generates a warning) but I keep it
- * in case of support for other hardware.
- */
- ret = request_irq(lis3_dev.irq, lis302dl_interrupt, IRQF_TRIGGER_RISING,
- DRIVER_NAME, &lis3_dev);
-
- if (ret) {
- clear_bit(0, &lis3_dev.misc_opened);
- printk(KERN_ERR DRIVER_NAME ": IRQ%d allocation failed\n", lis3_dev.irq);
- return -EBUSY;
- }
return 0;
}
static int lis3lv02d_misc_release(struct inode *inode, struct file *file)
{
fasync_helper(-1, file, 0, &lis3_dev.async_queue);
- free_irq(lis3_dev.irq, &lis3_dev);
clear_bit(0, &lis3_dev.misc_opened); /* release the device */
return 0;
}
@@ -434,6 +428,11 @@ EXPORT_SYMBOL_GPL(lis3lv02d_joystick_enable);
void lis3lv02d_joystick_disable(void)
{
+ if (lis3_dev.irq)
+ free_irq(lis3_dev.irq, &lis3_dev);
+ if (lis3_dev.pdata && lis3_dev.pdata->irq2)
+ free_irq(lis3_dev.pdata->irq2, &lis3_dev);
+
if (!lis3_dev.idev)
return;
@@ -524,6 +523,7 @@ EXPORT_SYMBOL_GPL(lis3lv02d_remove_fs);
static void lis3lv02d_8b_configure(struct lis3lv02d *dev,
struct lis3lv02d_platform_data *p)
{
+ int err;
int ctrl2 = p->hipass_ctrl;
if (p->click_flags) {
@@ -554,6 +554,18 @@ static void lis3lv02d_8b_configure(struct lis3lv02d *dev,
}
/* Configure hipass filters */
dev->write(dev, CTRL_REG2, ctrl2);
+
+ if (p->irq2) {
+ err = request_threaded_irq(p->irq2,
+ NULL,
+ lis302dl_interrupt_thread2_8b,
+ IRQF_TRIGGER_RISING |
+ IRQF_ONESHOT,
+ DRIVER_NAME, &lis3_dev);
+ if (err < 0)
+ printk(KERN_ERR DRIVER_NAME
+ "No second IRQ. Limited functionality\n");
+ }
}
/*
@@ -562,6 +574,9 @@ static void lis3lv02d_8b_configure(struct lis3lv02d *dev,
*/
int lis3lv02d_init_device(struct lis3lv02d *dev)
{
+ int err;
+ irq_handler_t thread_fn;
+
dev->whoami = lis3lv02d_read_8(dev, WHO_AM_I);
switch (dev->whoami) {
@@ -616,6 +631,32 @@ int lis3lv02d_init_device(struct lis3lv02d *dev)
goto out;
}
+ /*
+ * The sensor can generate interrupts for free-fall and direction
+ * detection (distinguishable with FF_WU_SRC and DD_SRC) but to keep
+ * the things simple and _fast_ we activate it only for free-fall, so
+ * no need to read register (very slow with ACPI). For the same reason,
+ * we forbid shared interrupts.
+ *
+ * IRQF_TRIGGER_RISING seems pointless on HP laptops because the
+ * io-apic is not configurable (and generates a warning) but I keep it
+ * in case of support for other hardware.
+ */
+ if (dev->whoami == WAI_8B)
+ thread_fn = lis302dl_interrupt_thread1_8b;
+ else
+ thread_fn = NULL;
+
+ err = request_threaded_irq(dev->irq, lis302dl_interrupt,
+ thread_fn,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ DRIVER_NAME, &lis3_dev);
+
+ if (err < 0) {
+ printk(KERN_ERR DRIVER_NAME "Cannot get IRQ\n");
+ goto out;
+ }
+
if (misc_register(&lis3lv02d_misc_device))
printk(KERN_ERR DRIVER_NAME ": misc_register failed\n");
out:
diff --git a/include/linux/lis3lv02d.h b/include/linux/lis3lv02d.h
index d625199..fd289b1 100644
--- a/include/linux/lis3lv02d.h
+++ b/include/linux/lis3lv02d.h
@@ -67,6 +67,7 @@ struct lis3lv02d_platform_data {
/* Limits for selftest are specified in chip data sheet */
s16 st_min_limits[3]; /* min pass limit x, y, z */
s16 st_max_limits[3]; /* max pass limit x, y, z */
+ int irq2;
};
#endif /* __LIS3LV02D_H_ */
--
1.6.0.4
next prev parent reply other threads:[~2010-02-16 11:11 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-16 11:09 [PATCH V2 0/6] lis3lv02d: click and threshold interrupts Samu Onkalo
2010-02-16 11:09 ` [PATCH V2 1/6] lis3: Add missing constants for 8bit device Samu Onkalo
2010-02-16 11:09 ` [PATCH V2 2/6] lis3: Separate configuration function for 8 bit device Samu Onkalo
2010-02-16 11:09 ` [PATCH V2 3/6] lis3: Introduce platform data for second ff / wu unit Samu Onkalo
2010-02-16 11:09 ` Samu Onkalo [this message]
2010-02-16 11:09 ` [PATCH V2 5/6] lis3: Interrupt handlers for 8bit wakeup and click events Samu Onkalo
2010-02-16 11:09 ` [PATCH V2 6/6] lis3: Setup poll interval limits Samu Onkalo
2010-02-25 7:26 ` [PATCH V2 0/6] lis3lv02d: click and threshold interrupts samu.p.onkalo
2010-03-06 14:26 ` Éric Piel
2010-03-15 6:53 ` samu.p.onkalo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1266318571-31083-5-git-send-email-samu.p.onkalo@nokia.com \
--to=samu.p.onkalo@nokia.com \
--cc=daniel@caiaq.de \
--cc=eric.piel@tremplin-utc.net \
--cc=linux-kernel@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
--cc=pavel@ucw.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®