From: Don Zickus <dzickus@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: Don Zickus <dzickus@redhat.com>,
mingo@elte.hu, peterz@infradead.org, gorcunov@gmail.com,
aris@redhat.com, eranian@google.com
Subject: [PATCH 1/2] nmi_watchdog: support for oprofile
Date: Tue, 16 Feb 2010 17:04:52 -0500 [thread overview]
Message-ID: <1266357892-30504-1-git-send-email-dzickus@redhat.com> (raw)
Re-arrange the code so that when someone disables nmi_watchdog with
echo 0 > /proc/sys/kernel/nmi_watchdog
it releases the hardware reservation on the PMUs. This allows the
oprofile module to grab those PMUs and do its thing. Otherwise
oprofile fails to load because the hardware is reserved by the
perf_events subsystem.
Tested using
oprofile --vm-linux --start
and watched it failed when nmi_watchdog is enabled and succeed when
oprofile --deinit && echo 0 > /proc/sys/kernel/nmi_watchdog
is run.
Note: this has the side quirk of having the nmi_watchdog latch onto
the software events instead of hardware events if oprofile has already
reserved the hardware first. User beware! :-)
Signed-off-by: Don Zickus <dzickus@redhat.com>
---
kernel/nmi_watchdog.c | 144 ++++++++++++++++++++++++++++---------------------
1 files changed, 82 insertions(+), 62 deletions(-)
diff --git a/kernel/nmi_watchdog.c b/kernel/nmi_watchdog.c
index 4f23505..633b230 100644
--- a/kernel/nmi_watchdog.c
+++ b/kernel/nmi_watchdog.c
@@ -61,50 +61,6 @@ static int __init setup_nmi_watchdog(char *str)
}
__setup("nmi_watchdog=", setup_nmi_watchdog);
-#ifdef CONFIG_SYSCTL
-/*
- * proc handler for /proc/sys/kernel/nmi_watchdog
- */
-int nmi_watchdog_enabled;
-
-int proc_nmi_enabled(struct ctl_table *table, int write,
- void __user *buffer, size_t *length, loff_t *ppos)
-{
- int cpu;
-
- if (!write) {
- struct perf_event *event;
- for_each_online_cpu(cpu) {
- event = per_cpu(nmi_watchdog_ev, cpu);
- if (event->state > PERF_EVENT_STATE_OFF) {
- nmi_watchdog_enabled = 1;
- break;
- }
- }
- proc_dointvec(table, write, buffer, length, ppos);
- return 0;
- }
-
- if (per_cpu(nmi_watchdog_ev, smp_processor_id()) == NULL) {
- nmi_watchdog_enabled = 0;
- proc_dointvec(table, write, buffer, length, ppos);
- printk("NMI watchdog failed configuration, can not be enabled\n");
- return 0;
- }
-
- touch_all_nmi_watchdog();
- proc_dointvec(table, write, buffer, length, ppos);
- if (nmi_watchdog_enabled)
- for_each_online_cpu(cpu)
- perf_event_enable(per_cpu(nmi_watchdog_ev, cpu));
- else
- for_each_online_cpu(cpu)
- perf_event_disable(per_cpu(nmi_watchdog_ev, cpu));
- return 0;
-}
-
-#endif /* CONFIG_SYSCTL */
-
struct perf_event_attr wd_attr = {
.type = PERF_TYPE_HARDWARE,
.config = PERF_COUNT_HW_CPU_CYCLES,
@@ -146,6 +102,85 @@ void wd_overflow(struct perf_event *event, int nmi,
return;
}
+static int enable_nmi_watchdog(int cpu)
+{
+ struct perf_event *event;
+
+ event = per_cpu(nmi_watchdog_ev, cpu);
+ if (event && event->state > PERF_EVENT_STATE_OFF)
+ return 0;
+
+ if (event == NULL) {
+ /* Try to register using hardware perf events first */
+ wd_attr.sample_period = hw_nmi_get_sample_period();
+ event = perf_event_create_kernel_counter(&wd_attr, cpu, -1, wd_overflow);
+ if (IS_ERR(event)) {
+ wd_attr.type = PERF_TYPE_SOFTWARE;
+ event = perf_event_create_kernel_counter(&wd_attr, cpu, -1, wd_overflow);
+ if (IS_ERR(event)) {
+ printk(KERN_ERR "nmi watchdog failed to create perf event on %i: %p\n", cpu, event);
+ return -1;
+ }
+ }
+ per_cpu(nmi_watchdog_ev, cpu) = event;
+ }
+ perf_event_enable(per_cpu(nmi_watchdog_ev, cpu));
+ return 0;
+}
+
+static void disable_nmi_watchdog(int cpu)
+{
+ struct perf_event *event;
+
+ event = per_cpu(nmi_watchdog_ev, cpu);
+ if (event) {
+ perf_event_disable(per_cpu(nmi_watchdog_ev, cpu));
+ per_cpu(nmi_watchdog_ev, cpu) = NULL;
+ perf_event_release_kernel(event);
+ }
+}
+
+#ifdef CONFIG_SYSCTL
+/*
+ * proc handler for /proc/sys/kernel/nmi_watchdog
+ */
+int nmi_watchdog_enabled;
+
+int proc_nmi_enabled(struct ctl_table *table, int write,
+ void __user *buffer, size_t *length, loff_t *ppos)
+{
+ int cpu;
+
+ if (!write) {
+ struct perf_event *event;
+ for_each_online_cpu(cpu) {
+ event = per_cpu(nmi_watchdog_ev, cpu);
+ if (event && event->state > PERF_EVENT_STATE_OFF) {
+ nmi_watchdog_enabled = 1;
+ break;
+ }
+ }
+ proc_dointvec(table, write, buffer, length, ppos);
+ return 0;
+ }
+
+ touch_all_nmi_watchdog();
+ proc_dointvec(table, write, buffer, length, ppos);
+ if (nmi_watchdog_enabled) {
+ for_each_online_cpu(cpu)
+ if (enable_nmi_watchdog(cpu)) {
+ printk("NMI watchdog failed configuration, "
+ " can not be enabled\n");
+ }
+ } else {
+ for_each_online_cpu(cpu)
+ disable_nmi_watchdog(cpu);
+ }
+ return 0;
+}
+
+#endif /* CONFIG_SYSCTL */
+
/*
* Create/destroy watchdog threads as CPUs come and go:
*/
@@ -153,7 +188,6 @@ static int __cpuinit
cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
{
int hotcpu = (unsigned long)hcpu;
- struct perf_event *event;
switch (action) {
case CPU_UP_PREPARE:
@@ -162,29 +196,15 @@ cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
break;
case CPU_ONLINE:
case CPU_ONLINE_FROZEN:
- /* originally wanted the below chunk to be in CPU_UP_PREPARE, but caps is unpriv for non-CPU0 */
- wd_attr.sample_period = hw_nmi_get_sample_period();
- event = perf_event_create_kernel_counter(&wd_attr, hotcpu, -1, wd_overflow);
- if (IS_ERR(event)) {
- wd_attr.type = PERF_TYPE_SOFTWARE;
- event = perf_event_create_kernel_counter(&wd_attr, hotcpu, -1, wd_overflow);
- if (IS_ERR(event)) {
- printk(KERN_ERR "nmi watchdog failed to create perf event on %i: %p\n", hotcpu, event);
- return NOTIFY_BAD;
- }
- }
- per_cpu(nmi_watchdog_ev, hotcpu) = event;
- perf_event_enable(per_cpu(nmi_watchdog_ev, hotcpu));
+ if (enable_nmi_watchdog(hotcpu))
+ return NOTIFY_BAD;
break;
#ifdef CONFIG_HOTPLUG_CPU
case CPU_UP_CANCELED:
case CPU_UP_CANCELED_FROZEN:
- perf_event_disable(per_cpu(nmi_watchdog_ev, hotcpu));
+ disable_nmi_watchdog(hotcpu);
case CPU_DEAD:
case CPU_DEAD_FROZEN:
- event = per_cpu(nmi_watchdog_ev, hotcpu);
- per_cpu(nmi_watchdog_ev, hotcpu) = NULL;
- perf_event_release_kernel(event);
break;
#endif /* CONFIG_HOTPLUG_CPU */
}
--
1.6.6.83.gc9a2
next reply other threads:[~2010-02-16 22:05 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-16 22:04 Don Zickus [this message]
2010-02-17 12:10 ` [tip:perf/nmi] " tip-bot for Don Zickus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1266357892-30504-1-git-send-email-dzickus@redhat.com \
--to=dzickus@redhat.com \
--cc=aris@redhat.com \
--cc=eranian@google.com \
--cc=gorcunov@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=peterz@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome