From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: linux-kernel@vger.kernel.org, fujita.tomonori@lab.ntt.co.jp,
chrisw@sous-sol.org, iommu@lists.linux-foundation.org,
dwmw2@infradead.org, alex.williamson@hp.com
Cc: jeremy@goop.org, Ian.Campbell@eu.citrix.com,
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Subject: [PATCH 05/10] swiotlb: Make internal bookkeeping functions have 'do_' prefix.
Date: Thu, 18 Feb 2010 11:27:01 -0500 [thread overview]
Message-ID: <1266510426-6815-6-git-send-email-konrad.wilk@oracle.com> (raw)
In-Reply-To: <1266510426-6815-5-git-send-email-konrad.wilk@oracle.com>
The functions that operate on io_tlb_list/io_tlb_start/io_tlb_orig_addr
have the prefix 'do_' now.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
lib/swiotlb.c | 20 ++++++++++----------
1 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/lib/swiotlb.c b/lib/swiotlb.c
index 0eb64d7..9085eab 100644
--- a/lib/swiotlb.c
+++ b/lib/swiotlb.c
@@ -60,8 +60,8 @@ enum dma_sync_target {
int swiotlb_force;
/*
- * Used to do a quick range check in unmap_single and
- * sync_single_*, to see if the memory was in fact allocated by this
+ * Used to do a quick range check in do_unmap_single and
+ * do_sync_single_*, to see if the memory was in fact allocated by this
* API.
*/
static char *io_tlb_start, *io_tlb_end;
@@ -394,7 +394,7 @@ static void swiotlb_bounce(phys_addr_t phys, char *dma_addr, size_t size,
* Allocates bounce buffer and returns its kernel virtual address.
*/
static void *
-map_single(struct device *hwdev, phys_addr_t phys, size_t size, int dir)
+do_map_single(struct device *hwdev, phys_addr_t phys, size_t size, int dir)
{
unsigned long flags;
char *dma_addr;
@@ -540,7 +540,7 @@ do_unmap_single(struct device *hwdev, char *dma_addr, size_t size, int dir)
}
static void
-sync_single(struct device *hwdev, char *dma_addr, size_t size,
+do_sync_single(struct device *hwdev, char *dma_addr, size_t size,
int dir, int target)
{
int index = (dma_addr - io_tlb_start) >> IO_TLB_SHIFT;
@@ -589,10 +589,10 @@ swiotlb_alloc_coherent(struct device *hwdev, size_t size,
if (!ret) {
/*
* We are either out of memory or the device can't DMA
- * to GFP_DMA memory; fall back on map_single(), which
+ * to GFP_DMA memory; fall back on do_map_single(), which
* will grab memory from the lowest available address range.
*/
- ret = map_single(hwdev, 0, size, DMA_FROM_DEVICE);
+ ret = do_map_single(hwdev, 0, size, DMA_FROM_DEVICE);
if (!ret)
return NULL;
}
@@ -626,7 +626,7 @@ swiotlb_free_coherent(struct device *hwdev, size_t size, void *vaddr,
if (!is_swiotlb_buffer(paddr))
free_pages((unsigned long)vaddr, get_order(size));
else
- /* DMA_TO_DEVICE to avoid memcpy in unmap_single */
+ /* DMA_TO_DEVICE to avoid memcpy in do_unmap_single */
do_unmap_single(hwdev, vaddr, size, DMA_TO_DEVICE);
}
EXPORT_SYMBOL(swiotlb_free_coherent);
@@ -682,7 +682,7 @@ dma_addr_t swiotlb_map_page(struct device *dev, struct page *page,
/*
* Oh well, have to allocate and map a bounce buffer.
*/
- map = map_single(dev, phys, size, dir);
+ map = do_map_single(dev, phys, size, dir);
if (!map) {
swiotlb_full(dev, size, dir, 1);
map = io_tlb_overflow_buffer;
@@ -759,7 +759,7 @@ swiotlb_sync_single(struct device *hwdev, dma_addr_t dev_addr,
BUG_ON(dir == DMA_NONE);
if (is_swiotlb_buffer(paddr)) {
- sync_single(hwdev, phys_to_virt(paddr), size, dir, target);
+ do_sync_single(hwdev, phys_to_virt(paddr), size, dir, target);
return;
}
@@ -847,7 +847,7 @@ swiotlb_map_sg_attrs(struct device *hwdev, struct scatterlist *sgl, int nelems,
if (swiotlb_force ||
!dma_capable(hwdev, dev_addr, sg->length)) {
- void *map = map_single(hwdev, sg_phys(sg),
+ void *map = do_map_single(hwdev, sg_phys(sg),
sg->length, dir);
if (!map) {
/* Don't panic here, we expect map_sg users
--
1.6.2.5
next prev parent reply other threads:[~2010-02-18 16:44 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-18 16:26 [REPOST PATCH RFC SWIOTLB 0.5] Separate address translation routines from core SWIOTLB book-keeping Konrad Rzeszutek Wilk
2010-02-18 16:26 ` [PATCH 01/10] swiotlb: fix: Update 'setup_io_tlb_npages' to accept both arguments in either order Konrad Rzeszutek Wilk
2010-02-18 16:26 ` [PATCH 02/10] swiotlb: Make 'setup_io_tlb_npages' accept new 'swiotlb=' syntax Konrad Rzeszutek Wilk
2010-02-18 16:26 ` [PATCH 03/10] swiotlb: Normalize the swiotlb_init_* function's naming syntax Konrad Rzeszutek Wilk
2010-02-18 16:27 ` [PATCH 04/10] swiotlb: Make printk's use same prefix and include dev_err when possible Konrad Rzeszutek Wilk
2010-02-18 16:27 ` Konrad Rzeszutek Wilk [this message]
2010-02-18 16:27 ` [PATCH 06/10] swiotlb: do_map_single: abstract out swiotlb_virt_to_bus calls out Konrad Rzeszutek Wilk
2010-02-18 16:27 ` [PATCH 07/10] swiotlb: Fix checkpatch warnings Konrad Rzeszutek Wilk
2010-02-18 16:27 ` [PATCH 08/10] swiotlb: Re-order the function declerations Konrad Rzeszutek Wilk
2010-02-18 16:27 ` [PATCH 09/10] swiotlb: Make swiotlb bookkeeping functions visible in the header file Konrad Rzeszutek Wilk
2010-02-18 16:27 ` [PATCH 10/10] swiotlb: EXPORT_SYMBOL_GPL functions + variables that are defined " Konrad Rzeszutek Wilk
2010-02-25 6:53 ` [PATCH 02/10] swiotlb: Make 'setup_io_tlb_npages' accept new 'swiotlb=' syntax FUJITA Tomonori
2010-02-25 12:49 ` Konrad Rzeszutek Wilk
2010-02-25 23:52 ` FUJITA Tomonori
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1266510426-6815-6-git-send-email-konrad.wilk@oracle.com \
--to=konrad.wilk@oracle.com \
--cc=Ian.Campbell@eu.citrix.com \
--cc=alex.williamson@hp.com \
--cc=chrisw@sous-sol.org \
--cc=dwmw2@infradead.org \
--cc=fujita.tomonori@lab.ntt.co.jp \
--cc=iommu@lists.linux-foundation.org \
--cc=jeremy@goop.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®