From: Jason Wessel <jason.wessel@windriver.com>
To: torvalds@linux-foundation.org
Cc: linux-kernel@vger.kernel.org,
kgdb-bugreport@lists.sourceforge.net,
Jason Wessel <jason.wessel@windriver.com>,
Frederic Weisbecker <fweisbec@gmail.com>,
Ingo Molnar <mingo@elte.hu>
Subject: [PATCH 3/8] x86,kgdb: Implement early hardware breakpoint debugging
Date: Thu, 25 Feb 2010 15:22:01 -0600 [thread overview]
Message-ID: <1267132926-23685-4-git-send-email-jason.wessel@windriver.com> (raw)
In-Reply-To: <1267132926-23685-1-git-send-email-jason.wessel@windriver.com>
It is not possible to use the hw_breakpoint.c API prior to mm_init(),
but it is possible to use hardware breakpoints with the kernel
debugger.
Prior to smp_init() it is possible to simply write to the dr registers
of the boot cpu directly. This can be used up until the
kgdb_arch_late() is invoked, at which point the standard hw_breakpoint.c
API will get used.
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
---
arch/x86/kernel/kgdb.c | 30 ++++++++++++++++++++++++++++--
1 files changed, 28 insertions(+), 2 deletions(-)
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index 896874a..8e79fea 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -199,6 +199,8 @@ static struct hw_breakpoint {
struct perf_event **pev;
} breakinfo[4];
+static unsigned long early_dr7;
+
static void kgdb_correct_hw_break(void)
{
int breakno;
@@ -210,6 +212,14 @@ static void kgdb_correct_hw_break(void)
int cpu = raw_smp_processor_id();
if (!breakinfo[breakno].enabled)
continue;
+ if (dbg_is_early) {
+ set_debugreg(breakinfo[breakno].addr, breakno);
+ early_dr7 |= encode_dr7(breakno,
+ breakinfo[breakno].len,
+ breakinfo[breakno].type);
+ set_debugreg(early_dr7, 7);
+ continue;
+ }
bp = *per_cpu_ptr(breakinfo[breakno].pev, cpu);
info = counter_arch_bp(bp);
if (bp->attr.disabled != 1)
@@ -224,7 +234,8 @@ static void kgdb_correct_hw_break(void)
if (!val)
bp->attr.disabled = 0;
}
- hw_breakpoint_restore();
+ if (!dbg_is_early)
+ hw_breakpoint_restore();
}
static int hw_break_reserve_slot(int breakno)
@@ -233,6 +244,9 @@ static int hw_break_reserve_slot(int breakno)
int cnt = 0;
struct perf_event **pevent;
+ if (dbg_is_early)
+ return 0;
+
for_each_online_cpu(cpu) {
cnt++;
pevent = per_cpu_ptr(breakinfo[breakno].pev, cpu);
@@ -258,6 +272,9 @@ static int hw_break_release_slot(int breakno)
struct perf_event **pevent;
int cpu;
+ if (dbg_is_early)
+ return 0;
+
for_each_online_cpu(cpu) {
pevent = per_cpu_ptr(breakinfo[breakno].pev, cpu);
if (dbg_release_bp_slot(*pevent))
@@ -302,7 +319,11 @@ static void kgdb_remove_all_hw_break(void)
bp = *per_cpu_ptr(breakinfo[i].pev, cpu);
if (bp->attr.disabled == 1)
continue;
- arch_uninstall_hw_breakpoint(bp);
+ if (dbg_is_early)
+ early_dr7 &= ~encode_dr7(i, breakinfo[i].len,
+ breakinfo[i].type);
+ else
+ arch_uninstall_hw_breakpoint(bp);
bp->attr.disabled = 1;
}
}
@@ -379,6 +400,11 @@ void kgdb_disable_hw_debug(struct pt_regs *regs)
for (i = 0; i < 4; i++) {
if (!breakinfo[i].enabled)
continue;
+ if (dbg_is_early) {
+ early_dr7 &= ~encode_dr7(i, breakinfo[i].len,
+ breakinfo[i].type);
+ continue;
+ }
bp = *per_cpu_ptr(breakinfo[i].pev, cpu);
if (bp->attr.disabled == 1)
continue;
--
1.6.4.rc1
next prev parent reply other threads:[~2010-02-25 21:24 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-25 21:21 [GIT PULL] kdb / early debug (2 of 2) Jason Wessel
2010-02-25 21:21 ` [PATCH 1/8] x86, kgdb: early trap init for early debug Jason Wessel
2010-02-25 21:22 ` [PATCH 2/8] x86, kgdb, init: Add early and late debug states Jason Wessel
2010-02-25 21:22 ` Jason Wessel [this message]
2010-02-25 23:58 ` [PATCH 3/8] x86,kgdb: Implement early hardware breakpoint debugging Frederic Weisbecker
2010-02-25 21:22 ` [PATCH 4/8] x86,early dr regs,kgdb: Allow kernel debugger early dr register access Jason Wessel
2010-02-25 21:22 ` [PATCH 5/8] kgdboc: Add ekgdboc for early use of the kernel debugger Jason Wessel
2010-02-25 21:22 ` [PATCH 6/8] earlyprintk,vga,kdb: Fix \b and \r for earlyprintk=vga with kdb Jason Wessel
2010-02-25 21:22 ` [PATCH 7/8] ehci-dbgp: split PID register updates for IN and OUT pipes Jason Wessel
2010-02-25 21:22 ` [PATCH 8/8] echi-dbgp: Add kernel debugger support for the usb debug port Jason Wessel
-- strict thread matches above, loose matches on Subject: below --
2010-02-12 22:39 [PATCH 0/7] early debugging kgdb & kdb proposed merge for 2.6.34 Jason Wessel
2010-02-12 22:39 ` [PATCH 3/8] x86,kgdb: Implement early hardware breakpoint debugging Jason Wessel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1267132926-23685-4-git-send-email-jason.wessel@windriver.com \
--to=jason.wessel@windriver.com \
--cc=fweisbec@gmail.com \
--cc=kgdb-bugreport@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®