From: "Ira W. Snyder" <iws@ovro.caltech.edu>
To: linux-kernel@vger.kernel.org
Subject: [PATCH 0/3 RFCv4] add support for Janz MODULbus devices
Date: Tue, 2 Mar 2010 13:22:06 -0800 [thread overview]
Message-ID: <1267564929-9324-1-git-send-email-iws@ovro.caltech.edu> (raw)
This patch series adds support for the Janz CMOD-IO carrier board, as well
as the Janz VMOD-ICAN3 Intelligent CAN controller and the Janz VMOD-TTL
Digital IO controller. The CMOD-IO carrier board is a PCI to MODULbus
bridge, into which plug MODULbus daughterboards. I only have access to two
types of daughtercards, the VMOD-ICAN3 and VMOD-TTL boards mentioned above.
The CAN driver has been tested under high loads. I am able to generate ~60%
bus utilization. With two VMOD-ICAN3 boards looped back to each other,
neither one loses any packets when only a single board is generating
packets at maximum speed. Once both boards start generating packets, one
board will sometimes loose arbitration, and cause some lost packets.
RFCv3 -> RFCv4:
- addressed many review comments
- switch to NAPI
- add TX flow control
- mark functions with __devinit and __devexit
- add sysfs readout of MODULbus number (hex switch)
- implement GPIO driver for VMOD-TTL
RFCv2 -> RFCv3:
- addressed many review comments
- correct CAN bus error handling
- use struct device to track subdevices
- use structures for register layout
- add lots of #defines for register values
- use better function prefixes
RFCv1 -> RFCv2:
- converted to a multi-driver model
- addressed many review comments
- added CAN bus error handling
- use a work function only instead of work + NAPI
- use SJA1000 bittiming calculation code
I appreciate any review you can offer.
Thanks,
Ira
next reply other threads:[~2010-03-02 21:22 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-02 21:22 Ira W. Snyder [this message]
2010-03-02 21:22 ` [PATCH 1/3] mfd: add support for Janz CMOD-IO PCI MODULbus Carrier Board Ira W. Snyder
2010-03-02 21:22 ` [PATCH 2/3] can: add support for Janz VMOD-ICAN3 Intelligent CAN module Ira W. Snyder
2010-03-17 19:33 ` Ira W. Snyder
2010-03-18 8:36 ` Wolfgang Grandegger
2010-03-18 15:19 ` Ira W. Snyder
2010-03-18 16:06 ` Wolfgang Grandegger
2010-03-02 21:22 ` [PATCH 3/3] gpio: add support for Janz VMOD-TTL Digital IO module Ira W. Snyder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1267564929-9324-1-git-send-email-iws@ovro.caltech.edu \
--to=iws@ovro.caltech.edu \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®