From: Greg Kroah-Hartman <gregkh@suse.de>
To: linux-kernel@vger.kernel.org
Cc: Alan Cox <alan@linux.intel.com>, stable <stable@kernel.org>,
Greg Kroah-Hartman <gregkh@suse.de>
Subject: [PATCH 31/36] tty: Fix the ldisc hangup race
Date: Tue, 2 Mar 2010 15:36:38 -0800 [thread overview]
Message-ID: <1267573003-782-31-git-send-email-gregkh@suse.de> (raw)
In-Reply-To: <20100302230956.GC32287@kroah.com>
From: Alan Cox <alan@linux.intel.com>
This was noticed by Matthias Urlichs and he proposed a fix. This patch
does the fixing a different way to avoid introducing several new race
conditions into the code.
The problem case is TTY_DRIVER_RESET_TERMIOS = 0. In that case while we
abort the ldisc change, the hangup processing has not cleaned up and restarted
the ldisc either.
We can't restart the ldisc stuff in the set_ldisc as we don't know what
the hangup did and may touch stuff we shouldn't as we are no longer
supposed to influence the tty at that point in case it has been re-opened
before we get rescheduled.
Instead do it the simple way. Always re-init the ldisc on the hangup, but
use TTY_DRIVER_RESET_TERMIOS to indicate that we should force N_TTY.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/tty_ldisc.c | 50 +++++++++++++++++++++++++++------------------
1 files changed, 30 insertions(+), 20 deletions(-)
diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c
index 3f653f7..500e740 100644
--- a/drivers/char/tty_ldisc.c
+++ b/drivers/char/tty_ldisc.c
@@ -706,12 +706,13 @@ static void tty_reset_termios(struct tty_struct *tty)
/**
* tty_ldisc_reinit - reinitialise the tty ldisc
* @tty: tty to reinit
+ * @ldisc: line discipline to reinitialize
*
- * Switch the tty back to N_TTY line discipline and leave the
- * ldisc state closed
+ * Switch the tty to a line discipline and leave the ldisc
+ * state closed
*/
-static void tty_ldisc_reinit(struct tty_struct *tty)
+static void tty_ldisc_reinit(struct tty_struct *tty, int ldisc)
{
struct tty_ldisc *ld;
@@ -721,10 +722,10 @@ static void tty_ldisc_reinit(struct tty_struct *tty)
/*
* Switch the line discipline back
*/
- ld = tty_ldisc_get(N_TTY);
+ ld = tty_ldisc_get(ldisc);
BUG_ON(IS_ERR(ld));
tty_ldisc_assign(tty, ld);
- tty_set_termios_ldisc(tty, N_TTY);
+ tty_set_termios_ldisc(tty, ldisc);
}
/**
@@ -745,6 +746,8 @@ static void tty_ldisc_reinit(struct tty_struct *tty)
void tty_ldisc_hangup(struct tty_struct *tty)
{
struct tty_ldisc *ld;
+ int reset = tty->driver->flags & TTY_DRIVER_RESET_TERMIOS;
+ int err = 0;
/*
* FIXME! What are the locking issues here? This may me overdoing
@@ -772,25 +775,32 @@ void tty_ldisc_hangup(struct tty_struct *tty)
wake_up_interruptible_poll(&tty->read_wait, POLLIN);
/*
* Shutdown the current line discipline, and reset it to
- * N_TTY.
+ * N_TTY if need be.
+ *
+ * Avoid racing set_ldisc or tty_ldisc_release
*/
- if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) {
- /* Avoid racing set_ldisc or tty_ldisc_release */
- mutex_lock(&tty->ldisc_mutex);
- tty_ldisc_halt(tty);
- if (tty->ldisc) { /* Not yet closed */
- /* Switch back to N_TTY */
- tty_ldisc_reinit(tty);
- /* At this point we have a closed ldisc and we want to
- reopen it. We could defer this to the next open but
- it means auditing a lot of other paths so this is
- a FIXME */
+ mutex_lock(&tty->ldisc_mutex);
+ tty_ldisc_halt(tty);
+ /* At this point we have a closed ldisc and we want to
+ reopen it. We could defer this to the next open but
+ it means auditing a lot of other paths so this is
+ a FIXME */
+ if (tty->ldisc) { /* Not yet closed */
+ if (reset == 0) {
+ tty_ldisc_reinit(tty, tty->termios->c_line);
+ err = tty_ldisc_open(tty, tty->ldisc);
+ }
+ /* If the re-open fails or we reset then go to N_TTY. The
+ N_TTY open cannot fail */
+ if (reset || err) {
+ tty_ldisc_reinit(tty, N_TTY);
WARN_ON(tty_ldisc_open(tty, tty->ldisc));
- tty_ldisc_enable(tty);
}
- mutex_unlock(&tty->ldisc_mutex);
- tty_reset_termios(tty);
+ tty_ldisc_enable(tty);
}
+ mutex_unlock(&tty->ldisc_mutex);
+ if (reset)
+ tty_reset_termios(tty);
}
/**
--
1.7.0.1
next prev parent reply other threads:[~2010-03-02 23:39 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-02 23:09 [GIT PATCH] TTY patches for 2.6.33-git Greg KH
2010-03-02 23:36 ` [PATCH 01/36] serial: fit blackfin uart over sport driver into common uart infrastructure Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 02/36] serial: copy UART properties of UPF_FIXED_TYPE ports provisioned using early_serial_setup Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 03/36] serial: 68328serial.c: remove BAUD_TABLE_SIZE macro Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 04/36] serial: atmel_serial: add poll_get_char and poll_put_char uart_ops Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 05/36] serial: synclink_gt: dropped transmit data bugfix Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 06/36] serial: 8250_pci: add support for MCS9865 / SYBA 6x Serial Port Card Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 07/36] serial: imx: fix NULL dereference Oops when pdata == NULL Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 08/36] serial: add support for Korenix JetCard Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 09/36] serial: fix test of unsigned Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 10/36] serial: Char: cyclades, fix compiler warning Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 11/36] serial: cyclades: allow overriding ISA defaults also when the driver is built-in Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 12/36] tty: char: mxser, remove unnecessary tty test Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 13/36] serial: isicom.c: use pr_fmt and pr_<level> Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 14/36] hvc_console: fix test on unsigned in hvc_console_print() Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 15/36] tty: moxa: remove #ifdef MODULE completely Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 16/36] ip2: remove #ifdef MODULE from ip2main.c Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 17/36] ip2: Add module parameter Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 18/36] tty: declare MODULE_FIRMWARE in various drivers Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 19/36] Char: synclink, remove unnecessary checks Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 20/36] serial: bfin_5xx: remove useless gpio handling with hard flow control Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 21/36] serial: bfin_5xx: need to disable DMA TX interrupt too Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 22/36] serial: bfin_5xx: kgdboc should accept gdb break only when it is active Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 23/36] serial: bfin_5xx: pull in linux/io.h for ioremap prototypes Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 24/36] serial: bcm63xx_uart: don't use kfree() on non kmalloced area Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 25/36] serial: bcm63xx_uart: allow more than one uart to be registered Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 26/36] sdio_uart: Use kfifo instead of the messy circ stuff Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 27/36] nozomi: Add tty_port usage Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 28/36] nozomi: Fix mutex handling Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 29/36] nozomi: Tidy up the PCI table Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 30/36] serial: timberdale: Remove dependancies Greg Kroah-Hartman
2010-03-02 23:36 ` Greg Kroah-Hartman [this message]
2010-03-02 23:36 ` [PATCH 32/36] tty: Fix up char drivers request_room usage Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 33/36] tty: Keep the default buffering to sub-page units Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 34/36] tty: Add a new VT mode which is like VT_PROCESS but doesn't require a VT_RELDISP ioctl call Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 35/36] jsm: removing the uart structure and filename on error Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 36/36] jsm: fixing error if the driver fails to load Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1267573003-782-31-git-send-email-gregkh@suse.de \
--to=gregkh@suse.de \
--cc=alan@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome